I upgraded my kentico web application project from version 10 to 11 using upgrade installer and used the codeupgrade utility to detect the code issue and modify them. compiled ok.
I got a message of successful upgrade.
When I accessed my website locally, got the error message below
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module IIS Web Core
Notification Unknown
Handler Not yet determined
Error Code 0x80070032
Config Error The configuration section 'appSettings' cannot be read because it is missing a section declaration
Config File \?\C:\compass_build\CMS\web.config
Requested URL http://localhost:80/
Physical Path
Logon Method Not yet determined
Logon User Not yet determined
Config Source:
10: </configSections>
11: <appSettings>
12: <add key="CMSProgrammingLanguage" value="C#" />
Could anyone please assist me to fix the issue, thanks
The following things you need to verify.
Dll's version if your site in website mode you need to remove all old Dll's and replace with new one.
Need verify the .NET Framework version version is available or not in the system.
check the event log whether Kentico upgrade is successful or not because on first run Kentico will updates the database changes and their state will be logged in event log
Related
I'm using IIS Express with Visual Studio 2013 on Windows 8.1 x64 for a WebAPI 2 application (all en-US here). This worked just fine roughly a month ago, but now I'm getting errors when attempting to debug the application.
If I do not run VS as admin (again, didn't need to do this before), I get:
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
Additional information: Access to the path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\~AspAccessCheck_c00414062044.tmp' is denied.
A second error occurs after this, or it will be the first error if I run VS as Administrator:
A first chance exception of type 'System.Globalization.CultureNotFoundException' occurred in mscorlib.dll
Additional information: Culture is not supported.
If I run the same WebAPI application from WebMatrix 3, it runs without errors (with or without running 'as Admin').
Project IIS config settings:
<UseIISExpress>true</UseIISExpress>
<IISExpressSSLPort>46435</IISExpressSSLPort>
<IISExpressAnonymousAuthentication>enabled</IISExpressAnonymousAuthentication>
<IISExpressWindowsAuthentication>disabled</IISExpressWindowsAuthentication>
<IISExpressUseClassicPipelineMode>false</IISExpressUseClassicPipelineMode>
I also have the application running on http://localhost:46436.
What I also find really strange is that the project properties show "IIS Express" and to use a URL of http://localhost:46436/, but in the project file I'm seeing:
<ProjectExtensions>
<VisualStudio>
<FlavorProperties GUID="{349c5851-65df-11da-9384-00065b846f21}">
<WebProjectProperties>
<UseIIS>True</UseIIS>
<AutoAssignPort>True</AutoAssignPort>
<DevelopmentServerPort>46435</DevelopmentServerPort>
<DevelopmentServerVPath>/</DevelopmentServerVPath>
<IISUrl>http://localhost:46436</IISUrl>
That may explain my access denied. Regardless if I unset, save, and re-set to use IIS Express (storing it for all users), the <UseIIS> property is set back to true.
EDIT: It looks like "Use IIS" is normal. I created a new WebAPI 2 project as a test. It ran fine under IIS Express OOTB.
I also had this issue. Ended up having to right click the folder in question and add access for the IIS_IUSR account.
If this isn't causing critical errors, you can also disable break mode for this sort of issue via Debug -> Options -> Debugging and check Enable Just My Code (Managed Only)
I updated all of the packages via the 'Manage NuGet Packages' console, and it started working.
I deployed an XBAP application on two different servers with different domain names. Unfortunately, It loads ok on first browsing domain and throws the exception below when browsing second. If I use mage -cc to clear the cache, again, it loads fine on first browsing domain and throws exception on second.
ERROR SUMMARY Below is a summary of the errors, details of these
errors are listed later in the log. An exception occurred while
downloading the application. Following failure messages were detected:
Unable to install this application because an application with the
same identity is already installed. To install this application,
either modify the manifest version for this application or uninstall
the preexisting application.
In the Manifest file, change the version of the application identity or republish, check in the project properties ->publish->check automatically increment revision with each publish. Then publish it and then run it.
hello i am trying to set up umbraco on my pc
i have followed each step
and when i try to lunch the site on iis i get this error
Module IIS Web Core
Notification BeginRequest
Handler Not yet determined
Error Code 0x80070032
Config Error The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration
Config File \?\C:\inetpub\wwwroot\cms\web.config
Requested URL http://localhost:80/cms
Physical Path C:\inetpub\wwwroot\cms
Logon Method Not yet determined
Logon User Not yet determined
any idea? please help
Try changing the version of .NET that the application pool is running under.
You've not mentioned which version of Umbraco you are using but I'm guessing 4.7.
If so you'll probably need to be running it under .NET4, unless you have specifically downloaded the .NET3.5 version direct from Codeplex.
try to change the port to other number rather than using default 80 port.
hope this helps
I'm trying to deploy a winform application with IIS and ClickOnce. I can access the publish.htm page and the install even starts when I click on the provided link.
However I get this error during the installation process:
Downloading http://MyWebSiteUrl/.../Interop.SHDocVw.dll did not succceed.
The remote server returned an error: (500) Internal Server Error.
Can anybody help me out on this ?
Thanks,
Bruno
I found out that I needed to check "use .deploy file extension" (under properties>Publish>Options>Deployment
[Answering this old question because it comes up as the best match in my case and the accepted answer was of no use to me].
Background, in an IIS hosted ClickOnce scenario, the downloadable components are itemized in a manifest file at the root of the deployment (that's how you can specify a single download link and deploy all the supporting components).
I was converting a tested application from a WiX installation to a lightweight version with ClickOnce and received the HTTP 500 error without anything else in the logs. Naturally, I failed to think it through and instead found myself getting dragged down the rabbit hole on the internets, with instructions for detailed logging, magic spells, etc.
Upon more sober reflection, the problem was simple and I should have been able to tell immediately from the IIS log: a 500 followed by a 0 is shorthand for 'you're an idiot, the content isn't where you said it was' and it had almost nothing to do with ClickOnce.
I had copy/paste/edited an existing download link template in MVC that was in use for simple apps and it happened to cater to only two levels of subfolders in the manifest. When I ported a more complex project structure, I ended up leaving items in a Resources sub-sub-subfolder that looked fine in the manifest but the path was being truncated in MVC so that the related item could not be found.
Moral of the story - if you get a 500 error always check first to make sure your non-functioning appliance is plugged into a working outlet...
Howdy all. I am trying to solve a problem which is apparently not uncommon and I'm not sure how to find how this was resolved for folks. When I run StructureMap on my machine through IIS I get an exception and it looks like this:
**Description**: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
**Exception Details**: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
This question has come up here at SO (https://stackoverflow.com/questions/784666/), in the comments on this blog post and a year or so ago on the structuremap mailing list.
My problem is not running it in a foreign hosting environment. I can't even get it to run on my own box (IIS 7.5, Win7 RC, .NET 3.5). I have tried to configure the site to use a custom policy file and the FileIOPermission is marked to have unrestricted access...no dice. If anyone has some tips or a link it would be greatly appreciated.
Update
So there is no way that this is the best way to solve the problem, but after digging around and looking into what Joshua mentioned, these are the things I had to do to get it working: StructureMap, Code Access Security and a Bad Solution to a Problem. A better solution would be appreciated.
For what it's worth, I ran into this same issue where I had full control over the box and even set all the permissions to full trust. With IIS 7.5, I had to change the identity used for the specific application pool to NetworkService instead of ApplicationPoolIdentity. Once I restarted IIS, it worked.
FYI, I'm using StructureMap v2.6.1 and ran into this issue.
I do not use an XML configuration, so I added the following line to my configuration code, which fixed the problem.
IgnoreStructureMapConfig = true;
This is a bug, and has been fixed in the trunk. It will be included in the 2.6+ releases.
Some earlier versions of StructureMap would either attempt to unnecessarily write the dynamic assemblies to disk, or unnecessarily attempt to read from the filesystem.
If you are running in a restricted environment that does not allow access to full paths in the filesystem (ASP.NET), make sure to set IgnoreDefaultFile = true when you configure your container. Keep in mind this will disable the ability to load XML configuration from StructureMap.config.
Using the official StructureMap 2.5.4 build on Windows 7 with IIS 7.5 I still encountered this problem.
Mallioch's change
ObjectFactory.Initialize(x =>
{
x.UseDefaultStructureMapConfigFile = false;
x.IgnoreStructureMapConfig = true;
was necessary to resolve the FileIOPermission exception but I then received Request for the permission of type ‘System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089′ failed. which I resolved using Mike's solution ( for which I've created a step-by-step visualization ).