I work with Android Studio 3.2 and I've done a firebase connection to get connected to the part of the register with the app I'm building.
Here's screenshots of where I'm seeing the error: https://imgur.com/a/GN72eL8 & https://imgur.com/a/kwxA2sH
Android resource compilation failed
Output: C:\Users\ERIK\AndroidStudioProjects\FirebaseAuthDemo\app\src\main\res\mipmap-anydpi-v26\ic_launcher.xml:12: error: not well-formed (invalid token).
Command: C:\Users\ERIK\.gradle\caches\transforms-1\files-1.1\aapt2-3.2.1-4818971-windows.jar\92d92d266c9089a895db65475d7e7f04\aapt2-3.2.1-4818971-windows\aapt2.exe compile --legacy \
-o \
C:\Users\ERIK\AndroidStudioProjects\FirebaseAuthDemo\app\build\intermediates\res\merged\debug \
C:\Users\ERIK\AndroidStudioProjects\FirebaseAuthDemo\app\src\main\res\mipmap-anydpi-v26\ic_launcher.xml
Daemon: AAPT2 aapt2-3.2.1-4818971-windows Daemon #1
Your /res/mipmap-anydpi-v26/ic_launcher.xml file is incorrect, on line 12. This is often caused by an incorrect character being there, e.g. a semicolon or full stop.
You can delete this file if you want a quick fix, otherwise open up the file see what the compiler has highlighted as the issue on line 12. If you can't work out what's wrong, edit your question with the file's contents and any additional errors.
Yes i see the correct your answer but i send your code here for see you who is problem
<?xml version="1.0" encoding="UTF-8"?>
<project version="4">
<component name="AndroidLayouts">
<shared>
<config />
</shared>
</component>
<component name="CMakeSettings">
<configurations>
<configuration
CONFIG_NAME="Deb
PROFILE_NAME="Debug
#JakeSteam
Related
I'm getting this error window message while trying to deploy a .NET 6 Azure Functions app to Azure from Visual Studio 2022:
Publish has encountered an error. We
were unable to determine the cause of the error. Check the output log
for more details.
A diagnostic log has been written to the following location:
"C:\Users\MyUserName\AppData\Local\Temp\tmpEB87.tmp"
The tmpEB87.tmp file contents look like this:
2/16/2022 1:43:18 PM
System.AggregateException: One or more errors occurred. ---> Microsoft.WebTools.Shared.Exceptions.WebToolsException: Publish has encountered an error. We were unable to determine the cause of the error. Check the output log for more details.
--- End of inner exception stack trace ---
---> (Inner Exception #0) Microsoft.WebTools.Shared.Exceptions.WebToolsException: Publish has encountered an error. We were unable to determine the cause of the error. Check the output log for more details. <---
Microsoft.WebTools.Shared.Exceptions.WebToolsException: Publish has encountered an error. We were unable to determine the cause of the error. Check the output log for more details.
===================
The Output log says this:
The attempt to publish the ZIP file through
https://xxx.scm.azurewebsites.net/api/zipdeploy failed with HTTP
status code Forbidden.
The MyFunctionName - Zip Deploy.pubxml file contents looks like this:
<?xml version="1.0" encoding="utf-8"?>
<!--
https://go.microsoft.com/fwlink/?LinkID=208121.
-->
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<WebPublishMethod>ZipDeploy</WebPublishMethod>
<PublishProvider>AzureWebSite</PublishProvider>
<LastUsedBuildConfiguration>Release</LastUsedBuildConfiguration>
<LastUsedPlatform>Any CPU</LastUsedPlatform>
<SiteUrlToLaunchAfterPublish>https://xxx.azurewebsites.net</SiteUrlToLaunchAfterPublish>
<LaunchSiteAfterPublish>False</LaunchSiteAfterPublish>
<ResourceId>/subscriptions/some-random-letters-123456789/resourceGroups/my-resource-group-name/providers/Microsoft.Web/sites/MyFunctionName</ResourceId>
<UserName>$MyFunctionName</UserName>
<_SavePWD>True</_SavePWD>
<IsLinux>true</IsLinux>
<PublishUrl>https://xxx.scm.azurewebsites.net/</PublishUrl>
</PropertyGroup>
</Project>
I've already spent a ton of time on this, so any help is appreciated.
One of the workarounds that you can try is to create a new Publish profile and publish it again. For this navigate to Your project's directory -> Properties -> Publish Profiles and delete the contents (or you can move to another location). Finally, click Finish in the publish profile wizard again.
Make sure WEBSITE_RUN_FROM_PACKAGE is 1 from your Application settings. Also, try restarting your function app.
NOTE:- When deploying from Visual Studio, you should be asked whether you want to upgrade the version of the app that is currently deployed. If you say yes, your app will be deployed.
My CCTray says build is broken and on the server(http://172.25.165.10/ccnet/)
I get this error
Server Error in '/ccnet' Application.
Configuration Error
<cruisecontrol xmlns:cb="urn:ccnet.config.builder">
<!-- This is your CruiseControl.NET Server Configuration file.
Add your projects below! -->
<project name="winapp"
description="demoproject showing a small config" queue="Q1">
<webURL>http://172.25.165.10/ccnet/</webURL>
<!-- specify a state folder to prevent CCNet from saving it in Program Files\CruiseControl.NET\server
programs may not standard write their data in it on windows Vista and up)
-->
<sourcecontrol type="svn">
<trunkUrl>https://citdevbox.arcade.local:8443/svn/cardwellR/trunk/winapp</trunkUrl>
<workingDirectory>c:\builds\winapp</workingDirectory>
<username>***</username>
<password>***</password>
</sourcecontrol>
<state type="state" directory="C:\CCNet\State" />
<!-- specify a artifactDirectory to prevent CCNet from saving it in Program Files\CruiseControl.NET\server
programs may not standard write their data in it on windows Vista and up)
-->
<artifactDirectory>C:\CCNet\BuildArtifacts\MyFirstProject</artifactDirectory>
<tasks>
<msbuild>
<executable>C:\WINDOWS\Microsoft.NET\Framework\\v3.5\MSBuild.exe</executable>
<projectFile>C:\Builds\build\BootStrapper.msbuild</projectFile>
<buildArgs>/noconsolelogger /t:CTSx86;BuildZip /v:d</buildArgs>
<logger>ThoughtWorks.CruiseControl.MsBuild.XmlLogger,C:\Program Files\CruiseControl.NET\server\ThoughtWorks.CruiseControl.MsBuild.dll</logger>
<timeout>900</timeout>
</msbuild>
</tasks>
<triggers>
<!-- check the source control every X time for changes,
and run the tasks if changes are found -->
<intervalTrigger
name="continuous"
seconds="300"
buildCondition="IfModificationExists"
initialSeconds="5"/>
</triggers>
<publishers>
<xmllogger />
<artifactcleanup cleanUpMethod="KeepLastXBuilds"
cleanUpValue="50" />
</publishers>
</project>
</cruisecontrol>
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The root element must match the name of the section referencing the file, 'appSettings'
Source Error:
Line 1: cruisecontrol xmlns:cb="urn:ccnet.config.builder"
Source File: C:\Program Files (x86)\CruiseControl.NET\server\ccnet.config Line: 1
Version Information: Microsoft .NET Framework Version:2.0.50727.5456; ASP.NET Version:2.0.50727.5456
You didn't post the content of your ccnet.config file which the error you are getting is complaining about. Lets start with the obvious. I would look to see if there is a typo in there, for example maybe a missing quote or something in the appSettings section. If you have the unmodified version revert back to that and see if your issue goes away and compare the unmodified with the modified.
There is an app called CCValidator which will tell you where the error is in your ccnet.config file. I suspect that is not where the problem is. It sounds like the error is in the ccservice.exe.config. Perhaps someone accidentally copied ccnet.config to ccservice.exe.config. The error may also be in your web dashboard's configuration.
I solved the issue by removing the build args tag.
</noconsolelogger /t:CTSx86;BuildZip /v:d>
My processor was 64 bit and I was using noconsolelogger /t:CTSx86 which is for a 32 bit processor. Anyway these were optional so I removed it worked fine.
I'm trying to start Android Studio RC4 on a freshly installed Ubuntu.
I'm under a proxy so I have set my proxy in Ubuntu System Settings.
Yet, I'm getting this when starting Android Studio:
[ 6987] WARN - ateSettings.impl.UpdateChecker - Connection failed. Please check your network connection and try again.
and the process seems to hang up at "Fetching Android SDK".
I've tried export http_proxy=... to no avail
Create or modify file:
~/.AndroidStudio/config/options/other.xml
or
~/.AndroidStudioBeta/config/options/other.xml
depending on Android Studio version.
Fill in:
<?xml version="1.0" encoding="UTF-8"?>
<application>
<component name="HttpConfigurable">
<option name="USE_HTTP_PROXY" value="true" />
<option name="PROXY_HOST" value="127.0.0.1" />
<option name="PROXY_PORT" value="3128" />
</component>
</application>
Replace 127.0.0.1 and 3128 with you http proxy settings.
I took a different approach to this problem. After editing the other.xml file there was no real results. My terminal still had [ 5154] WARN - ateSettings.impl.UpdateChecker - Connection failed. Please check your network connection and try again.
The next approach for me was locating the idea.properties file within android-studio > bin and adding
disable.android.first.run=true
to the last line of the file. This will disable first run and the associated hang.
Then I went to the android studio File > Settings > HTTP Proxy settings and made changes to the proxy settings. After which the line added earlier to the idea.properties file was deleted.
Hope this helps :)
I had the same problem and solved it by adding my proxy settings into the following file '.AndroidStudio/config/options/other.xml'
I am getting following error :
Class 'Lucky_Test_Helper_Data' not found in E:\wamp\www\raj\magento_new\app\Mage.php on line 521
I created this module using module creator.
I checked it with one of my magento installation, it worked fine. Then I copied the module to the actually installation where I wanted to use it.
I did a some debugging, and found that if I comment certain part of config.xml I get no error.
I figured that out after having a look at stack trace of error, which included following line.
include( 'E:\wamp\www\raj\magento_new\app\design\adminhtml\default\default\template\page\menu.phtml' );
here is my config.xml
now if I comment :
<!--<test module="test">
<title>Test</title>
<sort_order>71</sort_order>
<children>
<items module="test">
<title>Manage Test </title>
<sort_order>0</sort_order>
<action>test/adminhtml_test</action>
</items>
</children>
</test>-->
I get no error. Module seems to be loading fine till this point.
Do you see anything wrong?
Help me out.
You have to explicitly define that you are using helpers, like this:
<global>
<helpers>
<test>
<class>Lucky_Test_Helper</class>
</test>
</helpers>
</global>
In the menu you define with module="test" that your module handles the translation for it
I'm currently in the process of upgrading my WebLogic version from 10.0 to 10.3.3.
I did manage to successfully create a new 10.3 domain, but when I try to start it, I get the following error:
<Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
[Management:141266]Parsing Failure in config.xml: failed to load java
type corresponding to e=domain#http://xmlns.oracle.com/weblogic/domain>
Regardless to say, the server doesn't start.
I looked at my config.xml file and it looks harmless, the first few lines of it are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd" xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
There is a namespace entry for the namespace given in the error message (default namespace - xmlns), but I don't have a clue why the config file can't be parsed.
Thanks in Advance
A similar issue here turned out to be a permissions problem for the user starting weblogic.
Have you installed the new Weblogic server instance with a different user id? Can you check permissions?