I have the following worksheet function saved in the Sheet1 (DataInput) module of VBA
Sub worksheet_change(ByVal target As Range)
Set target = Range("F67")
If target.Value = "YES" Then
Call ThisWorkbook.Red_Macro_Text
End If
End Sub
This code calls the following code in ThisWorkbook
Public Sub Red_Macro_Text()
ThisWorkbook.Worksheets("DataInput").Range("B68").Value2 = ThisWorkbook.Worksheets("Text").Range("B3").Value2
End Sub
The purpose of the code is as follows:
The code uses an event trigger to watch for changes to worksheet ‘datainput’ cell F67.
Whenever the user selects ‘YES’ from a drop down menu in cell F67 it calls the subroutine in ThisWorkbook.
The code uses the range function to assign the value of 'text' worksheet B3 into 'datainput' worksheet B68 cell.
The trigger event does call the code and the content of B3 does get transferred to B68 however following this I then get the error message:
Run-time error ‘-2147417848 (80010108)’: Automation error The object
invoked has disconnected from its clients.
Please note I do not want to use an IF statement in excel to achieve this as I am trying to automate the process in VBA.
I have been searching for a solution to this problem for some time without success.
Does anyone know how to solve this problem as I have reached the limit of my understanding!
All help is appreciated
It doesn't make sense to Set target = Range("F67") because it is already retrieved as parameter ByVal target As Range
If you want to run the code only if F67 changes use the following instead:
Sub worksheet_change(ByVal Target As Range)
If Not Intersect(Target, Target.Parent.Range("F67")) Is Nothing Then
If Target.Parent.Range("F67").Value = "YES" Then
ThisWorkbook.Red_Macro_Text
End If
End If
End Sub
Note that Call is not needed to call a macro.
Try
Sub worksheet_change(ByVal Target As Range)
If Target.Address = Range("F67").Address Then
If Target.Value = "YES" Then
Call ThisWorkbook.Red_Macro_Text
End If
End If
End Sub
Related
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub