When I run my application with hazelcast and check distributed object on the application or on man-center I saw a strange map(c95b3d56...) even I did not create or pre-defined map.
Is there any advice what it could be and for what.
Below configuration is used in the application and no programmatic config.
<?xml version="1.0" encoding="UTF-8"?>
<hazelcast xsi:schemaLocation="http://www.hazelcast.com/schema/config hazelcast-config-3.8.xsd" xmlns="http://www.hazelcast.com/schema/config" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
................
<map name="stressCache">
<in-memory-format>BINARY</in-memory-format>
<backup-count>0</backup-count>
<statistics-enabled>false</statistics-enabled>
<async-backup-count>0</async-backup-count>
<time-to-live-seconds>10</time-to-live-seconds>
<max-idle-seconds>0</max-idle-seconds>
<eviction-policy>NONE</eviction-policy>
<eviction-percentage>25</eviction-percentage>
<min-eviction-check-millis>100</min-eviction-check-millis>
<merge-policy>com.hazelcast.map.merge.PutIfAbsentMapMergePolicy</merge-policy>
</map>
Hazelcast doesn't create any distributed maps internally. Also, the map you mentioned isn't seen in your configuration. This means it should be created by calling HazelcastInstance#getMap() API. Please check it if it is called in any part of your code, including the libraries that you are using.
Related
I have reverse proxy properly configured on both local and deployed cluster but Iam unable to access my owin based webAPI on reverse proxy port here is the response I get on this port
I have followed this link and am sure that its configured properly. The question is do I need to change some thing in my project or code to make it work.
Here is my service manifest for the webAPI :
<?xml version="1.0" encoding="utf-8"?>
<ServiceManifest Name="BimWebApiPkg"
Version="1.0.9"
xmlns="http://schemas.microsoft.com/2011/01/fabric"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ServiceTypes>
<!-- This is the name of your ServiceType.
This name must match the string used in RegisterServiceType call in Program.cs. -->
<StatelessServiceType ServiceTypeName="BimWebApiType" />
</ServiceTypes>
<!-- Code package is your service executable. -->
<CodePackage Name="Code" Version="1.0.9">
<EntryPoint>
<ExeHost>
<Program>BimWebApi.exe</Program>
<WorkingFolder>CodePackage</WorkingFolder>
</ExeHost>
</EntryPoint>
</CodePackage>
<!-- Config package is the contents of the Config directoy under PackageRoot that contains an
independently-updateable and versioned set of custom configuration settings for your service. -->
<ConfigPackage Name="Config" Version="1.0.9" />
<Resources>
<Endpoints>
<!-- This endpoint is used by the communication listener to obtain the port on which to
listen. Please note that if your service is partitioned, this port is shared with
replicas of different partitions that are placed in your code. -->
<Endpoint Protocol="http" Name="ServiceEndpoint" Type="Input" Port="80" />
</Endpoints>
</Resources>
</ServiceManifest>
I also tried without specifying any port but that too didn't work.
Seems like the url is incorrect. It's missing the part where you should have app name and service name specified. Try this -
http://localhost:19081/YOUR_APP_NAME/BimWebApi/api/TestAPI/GetString/
I am trying to store log4j2 logs in bluemix's cloudant DB.
Could you help me out or point to any document , regarding log4j2 configuration I need to make ?
Thank you.
Take a look at the Log4j 2 Docs - Appenders. The NoSQLAppender writes log events to a NoSQL database using an internal lightweight provider interface. Provider implementations currently exist for MongoDB and Apache CouchDB, and you can write a custom provider.
You specify which NoSQL provider to use by specifying the appropriate configuration element within the <NoSql> element. The types currently supported are <MongoDb> and <CouchDb>. To create your own custom provider, read the JavaDoc for the NoSQLProvider, NoSQLConnection, and NoSQLObject classes and the documentation about creating Log4j plugins.
Considering that Cloudant is built upon CouchDB you should be able to adapt the CouchDB appender for your purpose. The following is an example of appender configuration for CouchDB:
<?xml version="1.0" encoding="UTF-8"?>
<Configuration status="error">
<Appenders>
<NoSql name="databaseAppender">
<CouchDb databaseName="applicationDb" protocol="https" server="couch.example.org" username="loggingUser" password="abc123" />
</NoSql>
</Appenders>
<Loggers>
<Root level="warn">
<AppenderRef ref="databaseAppender"/>
</Root>
</Loggers>
</Configuration>
I've been asked to do a prototype, converting a working web service that uses a Spring enabled JAX-WS endpoint to using Spring Integration instead, and I've been told to use xml configuration as much as possible. I stripped down the application until just the relevant web service elements remain, and I've created a couple of new spring xml config files as needed. While it compiles fine, when I deploy to a JBoss container and then try to invoke it using SoapUI, I get a HTTP 405 response, and there's nothing in the JBoss console to indicate that the request was even received, though the server log indicates the new gateway and service activator was setup correctly and is running. I can't find anything remotely relevant in any of the Spring documentation I've read, and none of the code examples I've pulled from Github address configuring the web service to run in an actual J2EE server.
I'm at a complete loss as to what I should be looking at. Here are my spring config files:
springContext-main.xml (I can't use applicationContext.xml in the real app due to pre-existing contraints)
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd">
<context:annotation-config/>
<!-- <bean class="com.bofa.ecom.intfacade.web.ApplicationConfiguration"/> -->
<bean id="reconDao" class="com.bofa.ecom.intfacade.snf.recon.dao.ReconDAOImpl">
<!-- <property name="dataSource" ref="dataSource"/> -->
</bean>
<bean id="reconServiceHelper" class="com.bofa.ecom.intfacade.snf.recon.service.helper.ReconServiceHelperImpl">
<constructor-arg ref="reconDao"/>
</bean>
<import resource="classpath:/META-INF/spring/recon-ws.xml"/>
</beans>
recon-ws.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:util="http://www.springframework.org/schema/util"
xmlns:sws="http://www.springframework.org/schema/web-services"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
http://www.springframework.org/schema/util http://www.springframework.org/schema/util/spring-util-2.5.xsd
http://www.springframework.org/schema/oxm http://www.springframework.org/schema/oxm/spring-oxm-1.5.xsd
http://www.springframework.org/schema/web-services http://www.springframework.org/schema/web-services/web-services-2.0.xsd">
<bean id="messageFactory" class="org.springframework.ws.soap.saaj.SaajSoapMessageFactory"/>
<import resource="classpath:/META-INF/spring/inbound-gateway-config.xml" />
<sws:dynamic-wsdl id="reconWsdl" portTypeName="reconGateway" locationUri="/reconService"
targetNamespace="http://intfacade.cpm.ecom.bofa.com/">
<sws:xsd location="/WEB-INF/recon.xsd"/>
</sws:dynamic-wsdl>
<bean
class="org.springframework.ws.server.endpoint.mapping.UriEndpointMapping">
<property name="defaultEndpoint" ref="reconGateway"></property>
</bean>
</beans>
inbound-gateway-config.xml
<?xml version="1.0" encoding="utf-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:int-ws="http://www.springframework.org/schema/integration/ws"
xmlns:int="http://www.springframework.org/schema/integration"
xsi:schemaLocation="http://www.springframework.org/schema/integration/ws http://www.springframework.org/schema/integration/ws/spring-integration-ws.xsd
http://www.springframework.org/schema/integration http://www.springframework.org/schema/integration/spring-integration.xsd
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd">
<int:channel id="recon-input"/>
<int-ws:inbound-gateway id="reconGateway" request-channel="recon-input"/>
<int:service-activator input-channel="recon-input" method="saveArrangementApplicationDetails">
<bean id="arrangementApplicationReconService" class="com.bofa.ecom.intfacade.snf.recon.service.ArrangementApplicationReconServiceImpl">
<constructor-arg ref="reconServiceHelper"/>
</bean>
</int:service-activator>
</beans>
Any pointers in the right direction would be greatly appreciated.
Edit: I've narrowed it down to what I think is a configuration problem with either SI or Spring-ws. I can't find a complete SI + Spring-ws example that uses XML configuration to figure out what I'm missing or doing wrong. I've added my spring ws config file above.
405 is Method Not Allowed - it appears you are doing a GET (or something else) rather than a POST.
If you believe you are POSTing, take a look with a network monitor (wireshark, or the built-in tcp/ip monitor in eclipse).
You may also be hitting the wrong URL; I suggest you turn on DEBUG logging on the server.
If you still can't figure it out, post the log someplace such as a gist.
I'm trying to use the Spring Integration http outbound gateway, but I seem to be getting schema-related errors. The errors are:
cvc-complex-type.3.2.2: Attribute 'expected-response-type' is not allowed to appear in element 'int-http:outbound-gateway'. sprint-servlet.xml /sprint/src/main/webapp/WEB-INF line 28
cvc-complex-type.3.2.2: Attribute 'url' is not allowed to appear in element 'int-http:outbound-gateway'. sprint-servlet.xml /sprint/src/main/webapp/WEB-INF line 28
cvc-complex-type.3.2.2: Attribute 'http-method' is not allowed to appear in element 'int-http:outbound-gateway'. sprint-servlet.xml /sprint/src/main/webapp/WEB-INF line 28
cvc-complex-type.3.2.2: Attribute 'reply-timeout' is not allowed to appear in element 'int-http:outbound-gateway'. sprint-servlet.xml /sprint/src/main/webapp/WEB-INF line 28
It appears that the XSD does not accept these attributes. However, I've simply copy / pasted this from the Spring Integration docs. Here's the relevant part of my XML config file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:int="http://www.springframework.org/schema/integration"
xmlns:int-http="http://www.springframework.org/schema/integration/http"
xmlns:mvc="http://www.springframework.org/schema/mvc"
xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-4.0.xsd
http://www.springframework.org/schema/integration http://www.springframework.org/schema/integration/spring-integration.xsd
http://www.springframework.org/schema/integration/http http://www.springframework.org/schema/integration/http/spring-integration-http.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.0.xsd
http://www.springframework.org/schema/mvc http://www.springframework.org/schema/mvc/spring-mvc-4.0.xsd">
<!-- Spring Integration stuff -->
<int:channel id="requests">
</int:channel>
<int:channel id="replies"/>
<int-http:outbound-gateway id="example"
request-channel="requests"
url="http://localhost/test"
http-method="POST"
expected-response-type="java.lang.String"
charset="UTF-8"
reply-timeout="1234"
reply-channel="replies"/>
Is there something obvious that I'm doing wrong?
Thanks,
Tim
Add spring-integration-http and spring-integration-core to your dependencies.
Should work
I had the same problem and found the answer here
Why does Spring Integration have several XML schemas, and which one should I use?
Basically, the schema without a version is the version 1.0 schema. Point your schema to your version of spring integration like so
http://www.springframework.org/schema/integration
http://www.springframework.org/schema/integration/spring-integration-4.1.xsd
http://www.springframework.org/schema/integration/http
http://www.springframework.org/schema/integration/http/spring-integration-http-4.1.xsd
I'm not using STS - I'm using the standard Eclipse IDE. I'm not sure if STS helps with the classpath, but I simply can't get that to work for me. I ended up having to extract the XSDs from the .jar files and hosting them myself. Hopefully, the good folks at Spring Integration will post the most recent XSDs on the Spring site sometime soon. Until that time, however, I've got a workaround in place.
I am trying to do Configuring Web Flow for use with JSF. from the following site
http://static.springsource.org/spring-webflow/docs/2.3.x/reference/html/ch13s04.html
but I am getting the following error:
Description Resource Path Location Type
The prefix "si" for attribute "si:schemaLocation" associated with an element type "beans" is not bound. flowwithjsf.xml /WebFlowWithJSFIntegration/src/main/webapp/WEB-INF/spring line 12 XML Problem
Here is my XML it looks just like the site:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:webflow="http://www.springframework.org/schema/webflow-config"
xmlns:faces="http://www.springframework.org/schema/faces"
si:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
http://www.springframework.org/schema/webflow-config
http://www.springframework.org/schema/webflow-config/spring-webflow-config-2.3.xsd
http://www.springframework.org/schema/faces
http://www.springframework.org/schema/faces/spring-faces-2.2.xsd">
<!-- Executes flows: the central entry point into the Spring Web Flow system -->
<webflow:flow-executor id="flowExecutor">
<webflow:flow-execution-listeners>
<webflow:listener ref="facesContextListener"/>
</webflow:flow-execution-listeners>
</webflow:flow-executor>
<!-- The registry of executable flow definitions -->
<webflow:flow-registry id="flowRegistry" flow-builder-services="flowBuilderServices" base-path="/WEB-INF">
<webflow:flow-location-pattern value="**/*-flow.xml" />
</webflow:flow-registry>
<!-- Configures the Spring Web Flow JSF integration -->
<faces:flow-builder-services id="flowBuilderServices" />
<!-- A listener maintain one FacesContext instance per Web Flow request. -->
<bean id="facesContextListener"
class="org.springframework.faces.webflow.FlowFacesContextLifecycleListener" />
</beans>
try changing si:schemaLocation="... by xsi:schemaLocation="... I think that is why you are having this error
"To use this schema, include it in one of your infrastructure-layer beans files"
10.2 Spring docs