For reference I am using conda 22.9.0, Python 3.9.13, scikit-learn 1.0.2 according to conda list and I am using Windows OS 64 bit.
The newest sklearn version it will acknowledge or allow me to have is v1.0.2.
Update: No error is displayed when I try to update via conda update scikit-learn, it simply says "# All requested packages already installed.".
Check if you have it installed or show the error message you get. You might wanna install it via conda install scikit-learn in your cmd
Recently, I upgraded to Anaconda3 2020.07 which uses python 3.8. In past versions of anaconda, tensorflow was installed successfully. Tensorflow failed to be installed successfully in this version.
I ran the command below;
conda install tensorflow-gpu
The error message that I received is shown below;
UnsatisfiableError: The following specifications were found
to be incompatible with the existing python installation in your environment:
Specifications:
- tensorflow-gpu -> python[version='3.5.*|3.6.*|3.7.*|>=3.7,<3.8.0a0|>=3.6,<3.7.0a0|>=3.5,<3.6.0a0|>=2.7,<2.8.0a0']
Your python: python=3.8
If python is on the left-most side of the chain, that's the version you've asked for.
When python appears to the right, that indicates that the thing on the left is somehow
not available for the python version you are constrained to. Note that conda will not
change your python version to a different minor version unless you explicitly specify
that.
The following specifications were found to be incompatible with your CUDA driver:
- feature:/win-64::__cuda==11.0=0
Your installed CUDA driver is: 11.0
Is there a conda command with the right parameters to get tensorflow installed successfully?
UPDATE:
TF is now compatible with Python 3.8
Tensorflow is not compatible with Python 3.8. See https://www.tensorflow.org/install/pip
You need to downgrade your python version :
conda install python=3.7
Create an environment with python 3.7 and then activate it:
conda create -n p37env python=3.7
conda activate p37env
And install tensorflow.
This worked for me, and found out the answer from the Anaconda user guide (under how to use a different python version: https://conda.io/projects/conda/en/latest/user-guide/getting-started.html#managing-python )
From the requirement page:
Python 3.8 support requires TensorFlow 2.2 or later.
So there is a verison of Tensorflow compatible with python 3.8.
The problem is that TensorFlow 2.2.0 is not available through conda on Windows, this should be the reason why you get PackagesNotFoundError when running
conda install tensorflow=2.2
EDIT 15/03/21
Tensorflow 2.3.0 is compatible with Windows
i think we have two options here
pip install tensorflow
or we can use another env of anaconda such as like this below
conda create -n tf tensorflow pydotplus jupyter
conda activate tf
Actually you can directly use pip inside anaconda prompt, after I tested it, I found the conda is capable with pypi, first run the anaconda prompt with administrator permission (in windows), then enter "conda update --all" to make sure all the packages are latest, finally enter "pip install tensorflow" to install (the new version of tensorflow already includes tensorflow-gpu).
Then using VS code to open an ipynb and run
import tensorflow as tf
tf.test.gpu_device_name()
everything looks good.
For more info please refer to Anaconda official docs: https://docs.anaconda.com/anaconda/ .
Latest development for tensorflow installation on anaconda.
https://anaconda.org/anaconda/tensorflow
https://anaconda.org/anaconda/tensorflow-gpu
9 days ago, Anaconda uploaded a new tensorflow v2.3 package. Anaconda3 2020.07 (uses python v3.8) users can easily upgrade to tensorflow v2.3 with the following commands;
conda install -c anaconda tensorflow
conda install -c anaconda tensorflow-gpu
I have personally tested that the installation worked successfully.
The other answers for this question have now become obsolete.
Expanding upon William's answer here with more explicit instructions and caveats. Pip is the recommended way to install latest version of tensorflow as per tensorflow's installation instructions -- "While the TensorFlow provided pip package is recommended, a community-supported Anaconda package is available."
Here is the code that uses pip to do the installation in a Conda environment:
conda create -n env_name python=3.8
conda activate env_name
conda install pandas scikit-learn matplotlib notebook ##installing usual Data Science packages that does include numpy and scipy
pip install tensorflow
python -c "import tensorflow as tf;print(tf.__version__)" ##checks tf version
In general, we should be careful while mixing two package managers (conda and pip). So, it is suggested that:
Only after conda has been used to install as many packages as possible
should pip be used to install any remaining software. If modifications
are needed to the environment, it is best to create a new environment
rather than running conda after pip.
For an example, if we would like to install seaborn in the just created env_name environment, we should:
conda create --name cloned_env --clone env_name
conda activate cloned_env
conda install seaborn
Once we check the cloned_env environment is working fine, we can delete the env_name environment.
I was running into the same issue in conda prompt for Python 3.8.5 and fixed it using a Python wheel instead. Here are the steps:
Open conda prompt and install pip if you don't have it already: python -m pip install --upgrade pip
python -m pip install --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-2.4.0-cp38-cp38-win_amd64.whl
Note: If you need a CPU specific tensorflow, use this wheel: https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow_cpu-2.4.0-cp38-cp38-win_amd64.whl
I just downgraded python to 3.7 as tf is not avialable to 3.8 version also I cannot use virtualenv for code that's why
The only working answer for me is:
conda install -c conda-forge tensorflow
It appears that tensorflow 2.5 on GPU has issues with spyder. So, I made new environment and installed tensorflow gpu as suggested by anaconda. Now I have to use either prompt or jupyter . At least it works
For macos users I suggest create an environment with python 3.7 and install tensorflow there.
You can run these commands too:
conda create -n new_env_name python=3.7
conda activate new_env_name
I had a similar problem in Anaconda Spyder. Here was my solution (In the Anaconda Console):
conda install pip
pip install tensorflow ==2.2.0
I am running anaconda on windows; When i try to install pytorch in the anaconda prompt I get the following error
ModuleNotFoundError: No module named 'torchvision'
i checked the openssl version via conda list and it is 1.1.g3
I also moved the lib crypto and libssl from the anaconda/library/bin to anaconda3/DLLs (as per one the prior solutions.
What could be the issue? Please help
Use the commands given in the official pytorch website. Or you can use pip to install too. Commands for both conda and pip are given in pytorch website.
After having upgraded my environment's python to Python 3.61, I attempted to install pytorch using this command:
conda install -c peterjc123 pytorch
However I got this error:
Fetching package metadata .............
Solving package specifications: .
UnsatisfiableError: The following specifications were found to be in conflict:
-pytorch
-pyqt
I also used the commands
conda install -c peterjc123 pytorch cuda90
conda install -c peterjc123 pytorch cuda80
But the result is still the same. Anyone got a clue how to solve this?
The problem was solved after downgrading from Python 3.6.2 to Python 3.5.1 after running:
conda install -c anaconda python=3.5.1
After running this command, run:
conda install -c peterjc123 pytorch
Pytorch should install as per normal. A similar issue occurs for openCV as well
An alternative way to install pytorch using anaconda is
conda create -n py_env python=3.5
source activate py_env
conda install pytorch-cpu torchvision -c pytorch
Go to python shell and import using the command
import torch
Hope this helps.
I have successfully installed anaconda with python3.6.1 on my mac. I followed the instruction from the internet:
first enter this on terminal:
conda create -n venv_demo python=3.6.1
then activate:
source activate venv_demo
However, when I tried to install openv3
I either tried the cmd line
conda install -c https://conda.anaconda.org/menpo opencv3
or
conda install -c menpo opencv3
it gave me the error as following:
error showing on terminal
Could someone tell me how to fix it? Do I need to remove python 2.7? Now I have installed python 3.6.1 and have 2 versions on my mac. Thanks!
Have a look at the list of conda installers for OpenCV in under the menpo package on Anaconda's package list:
osx-64/opencv3-3.1.0-py27_0.tar.bz2
osx-64/opencv3-3.1.0-py34_0.tar.bz2
osx-64/opencv3-3.1.0-py35_0.tar.bz2
linux-64/opencv3-3.1.0-py35_0.tar.bz2
linux-64/opencv3-3.1.0-py27_0.tar.bz2
linux-64/opencv3-3.1.0-py36_0.tar.bz2
linux-64/opencv3-3.1.0-py34_0.tar.bz2
linux-64/opencv3-3.2.0-np111py35_0.tar.bz2
linux-64/opencv3-3.2.0-np111py34_0.tar.bz2
linux-64/opencv3-3.2.0-np111py27_0.tar.bz2
win-32/opencv3-3.1.0-py27_0.tar.bz2
win-64/opencv3-3.1.0-py35_0.tar.bz2
win-32/opencv3-3.1.0-py35_0.tar.bz2
win-64/opencv3-3.1.0-py34_0.tar.bz2
win-32/opencv3-3.1.0-py34_0.tar.bz2
win-64/opencv3-3.1.0-py27_0.tar.bz2
Notice the Python versions listed in each installer. For macOS, the newest menpo installer is OpenCV 3.1.0 and works on Python 3.5. So if you want to use the menpo installer, simply create a new environment with Python 3.5, activate, and then install:
conda create -n <opencv virtual env> python=3.5
source activate <opencv virtual env>
conda install -c menpo opencv3
Otherwise if you want to use Python 3.6 (which is a really great Python release), you'll need to build from source. See the great answer from this Stack Overflow question: Can't install OpenCV3 on Anaconda3 python3.6 on macOS.