I'm trying to run only one instance of my back up script as a cron job.
I know I can do it with a function that checks if the process is running:
if pgrep -x rclone >/dev/null
then
# rclone is still running, backup is not done yet, exit.
exit
else
# rclone is not running.
# start backup.
/path/to/rclone/script.sh
fi
But after some research, I found out flock should be used instead of looking for process ID, in crontab -e, in this case, run the script every 30 minutes:
*/30 * * * * /usr/bin/flock -n /var/lock/myjob.lock /path/to/rclone/script.sh
Running the command above requires sudo. Therefore, the script asks for sudo password, and never runs. (I ran the command above manually, that's how I found out).
How exactly do I use flock? Do I type a variable in my script that injects the sudo password when flock asks for it? (I know it's not secure, so there must be a different way to do this).
I tried to research this subject but couldn't find any good answers that explain how to use it properly.
Thank you.
I want to check if my scripts ran the last night(or last ran timestamp) on linux instance based on scripts crontab running time stamp.
So how to get scripts last ran time on linux instance?
I would suggest better record the start time during the start of the script and end time at the end of the Script.
# Start Time Entry
echo "Start : " $(date +%T) > exec.log
start=`date +%s`
CALL YOUR SCRIPT HERE
# End Time Entry
end=`date +%s`
echo "End : " $(date +%T) >> exec.log
# Get the Runtime
runtime=$((end-start))
echo "Runtime: $runtime" >> exec.log
If there is any better way, I am also curious to see and implement too.
grep cron from your "messages" or "syslog
grep -i cron /var/log/messages
or create a separate log file for cron from rsyslog, edit file /etc/rsyslog.conf and change #cron to cron. You will find logs in /var/log/cron
I have a script that checks if the PPTP VPN is running, and if not it reconnects the PPTP VPN. When I run the script manually it executes fine, but when I make a cron job, it's not running.
* * * * * /bin/bash /var/scripts/vpn-check.sh
Here is the script:
#!/bin/sh
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult="`echo "$result" | sed 's/^\(.................................\).*$$'`"
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
finally i found a solution ... instead of entering the cronjob with
crontab -e
i needed to edit the crontab file directly
nano /etc/crontab
adding e.g. something like
*/5 * * * * root /bin/bash /var/scripts/vpn-check.sh
and its fine now!
Thank you all for your help ... hope my solution will help other people as well.
After a long time getting errors, I just did this:
SHELL=/bin/bash
PATH=/bin:/sbin:/usr/bin:/usr/sbin
* * * * * /bin/bash /home/joaovitordeon/Documentos/test.sh
Where test.sh contains:
#!/bin/bash
/usr/bin/python3 /home/joaovitordeon/Documentos/test.py;
In my case, the issue was that the script wasn't marked as executable. To make sure it is, run the following command:
chmod +x your_script.sh
If you're positive the script runs outside of cron, execute
printf "SHELL=$SHELL\nPATH=$PATH\n* * * * * /bin/bash /var/scripts/vpn-check.sh\n"
Do crontab -e for whichever crontab you're using and replace it with output of the above command. This should mirror most of your environment in case there is some missing path issue or something else. Also check logs for any errors it's getting.
Though it definitly looks like the script has an error or you messed something up when copying it here
sed: -e expression #1, char 44: unterminated `s' command
./bad.sh: 5: ./bad.sh: [[: not found
Simple alternate script
#!/bin/bash
if [[ $(ping -c3 192.168.17.27) == *"0 received"* ]]; then
/usr/sbin/pppd call home
fi
Your script can be corrected and simplified like this:
#!/bin/sh
log=/tmp/vpn-check.log
{ date; ping -c3 192.168.17.27; } > $log
if grep -q '0 received' $log; then
/usr/sbin/pppd call home >>$log 2>&1
fi
Through our discussion in comments we confirmed that the script itself works, but pppd doesn't, when running from cron. This is because something must be different in an interactive shell like your terminal window, and in cron. This kind of problem is very common by the way.
The first thing to do is try to remember what configuration is necessary for pppd. I don't use it so I don't know. Maybe you need to set some environment variables? In which case most probably you set something in a startup file, like .bashrc, which is usually not used in a non-interactive shell, and would explain why pppd doesn't work.
The second thing is to check the logs of pppd. If you cannot find the logs easily, look into its man page, and it's configuration files, and try to find the logs, or how to make it log. Based on the logs, you should be able to find what is missing when running in cron, and resolve your problem.
Was having a similar problem that was resolved when a sh was put before the command in crontab
This did not work :
#reboot ~myhome/mycommand >/tmp/logfile 2>&1
This did :
#reboot sh ~myhome/mycommand >/tmp/logfile 2>&1
my case:
crontab -e
then adding the line:
* * * * * ( cd /directory/of/script/ && /bin/sh /directory/of/script/scriptItself.sh )
in fact, if I added "root" as per the user, it thought "root" was a command, and it didn't work.
As a complement of other's answers, didn't you forget the username in your crontab script ?
Try this :
* * * * * root /bin/bash /var/scripts/vpn-check.sh
EDIT
Here is a patch of your code
#!/bin/sh
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult=`echo "$result" | /bin/sed 's/^\(.................................\).*$/\1/'`
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
In my case, it could be solved by using this:
* * * * * root ( cd /directory/of/script/ && /directory/of/script/scriptItself.sh )
I used some ./folder/-references in the script, which didn't work.
The problem statement is script is getting executed when run manually in the shell but when run through cron, it gives "java: command not found" error -
Please try below 2 options and it should fix the issue -
Ensure the script is executable .If it's not, execute below -
chmod a+x your_script_name.sh
The cron job doesn’t run with the same user with which you are executing the script manually - so it doesn't have access to the same $PATH variable as your user which means it can't locate the Java executable to execute the commands in the script. We should first fetch the value of PATH variable as below and then set it(export) in the script -
echo $PATH can be used to fetch the value of PATH variable.
and your script can be modified as below - Please see second line starting with export
#!/bin/sh
export PATH=<provide the value of echo $PATH>
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult="`echo "$result" | sed 's/^\(.................................\).*$$'`"
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
First of all, check if cron service is running. You know the first question of the IT helpdesk: "Is the PC plugged in?".
For me, this was happening because the cronjob was executing from /root directory but my shell script (a script to pull the latest code from GitHub and run the tests) were in a different directory. So, I had to edit my script to have a cd to my scripts folder. My debug steps were
Verified that my script run independent of cron job
Checked /var/log/cron to see if the cron jobs are running. Verified that the job is running at the intended time
Added an echo command to the script to log the start and end times to a file. Verified that those were getting logged but not the actual commands
Logged the result of pwd to the same file and saw that the commands were getting executed from /root
Tried adding a cd to my script directory as the first line in the script. When the cron job kicked off this time, the script got executed just like in step 1.
it was timezone in my case. I scheduled cron with my local time but server has different timezone and it does not run at all. so make sure your server has same time by date cmd
first run command env > env.tmp
then run cat env.tmp
copy PATH=.................. Full line and paste into crontab -e, line before your cronjobs.
try this
/home/your site folder name/public_html/gistfile1.sh
set cron path like above
Im doing a Bash-Backup Script with 3 Options:
Do fullbackup
Do fullbackup at a specific time with cron
First I want to ask for the path like: Path of directory: /home
Then i want the hour for the backup: Hour for the backup (0:00-23:59) : 2:00
Then a simple question like: The backup will execute at 2:00. Do you agree(y/n)
I know how to do a crontab but I have no idea how to include that in my script so that I choose option 2 and then the script asks me for the directory and time and set then the crontab.
Any ideas or help would be appreciated!
You can get the existing crontab with
crontab -l
and install a new crontab with
crontab file
So your script would probably need something like
crontab -l | grep -v "# install-backup-script" > /tmp/file.$$
echo "$min $hour * * * /full/path/to/script # install-backup-script" >> /tmp/file.$$
crontab /tmp/file.$$
rm -f /tmp/file.$$
What I am trying and tried to do:
I've written a Shellscript which should write some logs into a logfile. Something like:
echo "downloaded header" >> log
I also tried with cat instead of echo and I've given full permissions to the log so it should be accessible for anyone. If I start the script from the command line everything works fine and the entries are made as expected.
It didn't matter if I gave the full path to the logfile or not, I tried both.
The Problem:
If I run the script from crontab and yes It has to work with crontab, nothing is written into my log. So the echo "xy" >> log doesn't work, neither does the cat.
Any Ideas? Thanks in advance.
try this solution:
cat cronjob
* * * * * echo "downloaded header" >> /path/to/log
Then:
chmod +x cronjob
chmod +x script.sh
/etc/init.d/crond start #redhat based servers like centos
/etc/init.d/cron start #debian based servers like ubuntu
crontab cronjob
Try redirecting to the log file with full path
echo "downloaded header" >> $HOME/Log_dir/log ## just an example