When the content is modified in the Portal , a new version is created and Published and this becomes approved Version . Yet when we restart the liferay server ,all modifications are lost in the new version. Please help me out to get this sorted.
This issue seems not solved yet after doing the below change too.
Please help me out
If you're using ressource importer, you must disable developer mode in resource importer configurations.
Go to :
src/WEB-INF/liferay-plugin-package.properties
and then update the property.
resources-importer-developer-mode-enabled=false
Related
Im working with Liferay 7 and module development.
I created a module of type "portlet-provider" for can change the view of personalBar.
When I deploy it first time, it deploys ok, but after that, new deploys are not refreshing jsp files.
Is important to said that when I deploy the module, via blade or via gradle in Intellij, it deploys ok and also change the OSGI related folder, deleting old version and creating a new one with new jsp ok.
Even with that in a clear browser (recent removed all cache and temp) does no not refresh the personalBar view, related to new jsp file.
I saw this thread: https://web.liferay.com/community/forums/-/message_boards/message/88515142 , and tested the following.
1) Changed the tomcat timeZone, put the same timezone that I had in my desktop. (GMT-3 ) , it didn't work .
2) The only thing that seems to work is to clear all osgi state content and $liferay_home/work content and restart server as David said in above post.
But I need a way to can deploy theses modules without having to restart the server
Any help on this?
Thanks in advance
About my problem, I had a problem with the priority of the module so the module been deployed were not the same showed in portal.
At the beginning I set the "service.ranking:Integer="+Integer.MAX_VALUE , but I don't know why it was removed and for that the portlet showed was the portal default personal bar.
I have API Connect installed with mongodb connector over a remote server.
When I access the IBM API Connect through browser, all is fine, but when I go to DataSources where my DB is, and try to hit Update Schema button as shown in the image, an error occurs showing this:
Cannot GET /apim/dataSources/partials/dataSourceMigrate.html
P.S. I gave full permission for my project directory (/var/www/) with full ownership for www-data group and still the same.
Anyhelp would be appreciated.
FINALLY AND AFTER 2 MONTHS OF WAITING, I've got an answer from IBM Bluemix Support and sorry to bring the bad news, which is the following:
Hi Ghassan,
Thanks for sending the additional files. I checked with our development team and they found a bug in the code.
The fix will be available in a future release of the apic command line, but I don't have a date for it yet.
I will further discuss the plans to release this fix and will update you as soon as possible.
IBM Bluemix Developer Support and Enablement Team
A fix has been provided for this issue in iFix versions of 5.0.3.0, 5.0.4.0 as well as newer versions of API Connect. If you are still experiencing this issue, please update to a later version that includes the fix.
I've installed SUPEE 6788 and from default, admin routing compatibility is "Enabled", all extensions work fine. However, when I "Disable" it, My Manage Products page is not working.
Does anyone know where this may be due to? Meaby I need also the update Magento to 1.9.2.2.?
Log out and login again and check if it works..
if not then check the status of SUPEE6788 in Magento Connect Manager.
One of your extensions is probably not compatible with the new patch. This is a comprehensive description of what the patch does and included is a link to extensions that are and aren't compatible with the patch. Hopefully there'll be an upgrade that will resolve your issue.
https://magento.stackexchange.com/questions/87214/how-to-check-which-modules-are-affected-by-security-patch-supee-6788
The following issue just crept up on me. The steps mentioned below had worked just fine until about 2 days ago.
When I deploy a update to a solution (of web parts) to a SharePoint 2010 server I don't see the update. The solution does get installed, but from what I can tell the installed web parts are over a month old (nothing new is installed).
I do the following steps through PowerShell:
retract the solution from the web app
remove the solution
add the solution
install the solution to the web app
I have tried restarting the Web App, restarting IIS and also restarting the server. Nothing seems to work.
I notice that after I remove the solution it does get removed from the GAC. After I add/install it the solution does reappears in the GAC.
Am I missing something? Am I overlooking a step that I should be doing? Something to try?
I never deactivated/reactivated the Feature.
After following the same steps I mentioned in my question I just deactivated, then reactivated, the Feature and everything started to working fine.
This is an easy thing to I can start to implement with my solution updates. However, why did I never have to do this step before?
In general, you should check your ULS log to see which version of your solution is running. If you see the old one, then you can be sure that your activated site feature is still bound to the old version. In this case you have to Inactivate the site feature indeed to loose that tie and then Activate to bind to the new one (it appears Activate always ties the site feature to the newest version of the solution).
Maybe you had not to do this earlier, because you did not change the version number of your solution, appearing as the same version in GAC on the server. In this case you had your site feature already pointing to the correct version of your solution, therefore didn't have to reset the feature.
You have probably checked, but just in case. Make sure that the powershell script is not adding a month old package.
Is the problem in the web part code or the configuration? The configuration usually unghosts itself sooner or later and refuses to update from the solution - you can update the file in the gallery manually if anything has changed there. For most updates there won't be any changes because existing web parts won't get updates applied anyway - they will use new code but old configuration.
If the problem is the code itself, does the assembly appear to the system to be unchanged? All the hardcoded full name references in SharePoint config files mean that usually you are deploying a new assembly but with the same version numbers. This can mean that the system doesn't bother making the update. I have found it very useful to update AssemblyFileVersion (which does not affect binding) on every build and have a page in _layouts that displays the file versions of all the loaded assemblies so I know exactly what is running.
Im new with liferay have a problem with portlet deployment using the plugins sdk,
Platform:
liferay-portal-tomcat-5.5-5.1.2,
liferay-plugins-sdk-5.2.2,
windows vista.
Problem:
I have successfully created a sample portlet with ant and deployed it into the hot-deploy folder. It is automatically picked up by the server but the console messages say that the portlet has been copied successfully and never registers it.. and i cant find it in the add application drop-down menu.. pls your help will be very appreciated.
I don't know if anything important changed in these versions, but you say you're using Liferay 5.1.2 with the plugin environment 5.2.2 - try with matching versions - at least on the second digit.
also, make sure that all required files are available - among them are WEB-INF/web.xml, WEB-INF/portlet.xml.
Create a new sample portlet with "create.bat" in the plugin SDK's portlet folder and deploy this - it should succeed. Then make sure that all config files from the new one are present in your current one.
How did you create your current portlet? What did you do/change?