Is it possible to vertically center align all the rects inside a tag without having to adjust the y attributes on <rect>? (see snippet for example)
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3/org/1999/xlink" viewBox="0 0 225 38" preserveAspectRatio="none" width="100%" height="100%">
<g fill="black">
<rect x="10" y="1" width="6" height="5" />
<rect x="20" y="1" width="6" height="10" />
<rect x="30" y="1" width="6" height="20" />
<rect x="40" y="1" width="6" height="5" />
<rect x="50" y="1" width="6" height="15" />
</g>
</svg>
<h3>desired result</h3>
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3/org/1999/xlink" viewBox="0 0 225 38" preserveAspectRatio="none" width="100%" height="100%">
<g fill="black">
<rect x="10" y="8" width="6" height="5" />
<rect x="20" y="6" width="6" height="10" />
<rect x="30" y="1" width="6" height="20" />
<rect x="40" y="8" width="6" height="5" />
<rect x="50" y="4" width="6" height="15" />
</g>
</svg>
No, it's not possible to center align <rect> elements.
But it is possible to center-align <line> elements and give them a stroke-width (note the viewBox is vertically centered around 0):
<svg viewBox="0 -19 225 38" width="100%" height="100%">
<g stroke="black">
<line x1="10" x2="16" stroke-width="5" />
<line x1="20" x2="26" stroke-width="10" />
<line x1="30" x2="36" stroke-width="20" />
<line x1="40" x2="46" stroke-width="5" />
<line x1="50" x2="56" stroke-width="15" />
</g>
</svg>
You could also achieve vertically centered <rect> elements by setting a transform: translate(0, -50%) css rule.
This approach also requires a transform-box: fill-box; (or content-box) property.
All <rect>elements get a y="50%" attribute to start at the vertical center of the svg viewBox.
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3/org/1999/xlink" viewBox="0 0 225 38" width="100%" height="100%" style="border:1px solid #ccc">
<style>
rect {
transform: translate(0, -50%);
transform-origin: center;
transform-box: fill-box;
}
</style>
<g fill="black" >
<rect x="10" y="50%" width="6" height="5" />
<rect x="20" y="50%" width="6" height="10" />
<rect x="30" y="50%" width="6" height="20" />
<rect x="40" y="50%" width="6" height="5" />
<rect x="50" y="50%" width="6" height="15" />
</g>
</svg>
Browser support for transform-box is decent. (See caniuse).
However, if you need legacy browser (e.g. ie11) support, #ccprog's answer is a more robust solution.
Please understand this question properly before marking as duplicate.
There are many questions like this one in StackOverflow, but my question is slightly different from those.
I have a chakra.svg file, whose code is this:
<svg xmlns="http://www.w3.org/2000/svg" width="100" height="100" id="b">
<circle cx="50" cy="50" r="45" stroke-width="2" stroke="blue" fill="none"/>
<script>
<![CDATA[
for(i=0;i<24;i++)
{
var l=document.createElementNS("http://www.w3.org/2000/svg","line");
l.setAttributeNS(null,"x1","50");
l.setAttributeNS(null,"y1","50");
l.setAttributeNS(null,"x2","5");
l.setAttributeNS(null,"y2","50");
l.setAttributeNS(null,"stroke-width",2);
l.setAttributeNS(null,"stroke","blue");
l.setAttributeNS(null,"transform","rotate("+(i/24*360)+",50,50)");
document.querySelector("#b").appendChild(l);
}
]]>
</script>
</svg>
The output is rendered as expected, like this:
I have another file, India_flag.svg whose code is this:
<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="170" height="100">
<rect x="0" y="0" height="33" width="180" fill="#f93"/>
<rect x="0" y="33" height="34" width="180" fill="white"/>
<rect x="0" y="67" height="33" width="180" fill="green"/>
</svg>
The output of this file is also rendered as expected:
But, now the problem is, when I am trying to insert the chakra.svg file inside the India_flag.svg file using the image tag like this:
<image xlink:href="chakra.svg" x="70" y="35" height="30" width="30"/>
The output should have been that the wheel is placed at the centre of the flag, but I am getting this output:
The chakra.svg file is rendered, but the JavaScript code in that file did not run, only the circle is rendered. What am I doing wrong and how to achieve my objective?
SVG documents when loaded inside an <image> tag (or HTML <img> for that matter) are sand-boxed and won't allow the execution of scripts, nor will they be interactive (i.e no user-event).
To circumvent that, you need an other way to append you svg. The simple solution would be to copy its markup directly in the main one:
<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="170" height="100">
<rect x="0" y="0" height="33" width="180" fill="#f93"/>
<rect x="0" y="33" height="34" width="180" fill="white"/>
<rect x="0" y="67" height="33" width="180" fill="green"/>
<svg x="70" y="35" height="30" width="30" id="b" viewBox="0 0 100 100">
<circle cx="50" cy="50" r="45" stroke-width="2" stroke="blue" fill="none"/>
<script>
<![CDATA[
for(i=0;i<24;i++) {
var l=document.createElementNS("http://www.w3.org/2000/svg","line");
l.setAttribute("x1","50");
l.setAttribute("y1","50");
l.setAttribute("x2","5");
l.setAttribute("y2","50");
l.setAttribute("stroke-width",2);
l.setAttribute("stroke","blue");
l.setAttribute("transform","rotate("+(i/24*360)+",50,50)");
document.querySelector("#b").appendChild(l);
}
]]>
</script>
</svg>
</svg>
An other solution, would have been to do the inverse: load your flag image from the one with the script: plnkr.
I'm looking to do some client-side image manipulation using CamanJS (http://camanjs.com/guides/) or some other tool like it on an image within an <svg> element.
Sample code is like this...
<svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="624" height="793" id="svg_3162" style="width: 639px;">
<desc>Created with Rapha�l</desc>
<defs></defs>
<rect x="15" y="150" width="24" height="24" r="0" rx="0" ry="0" fill="#ff0000" stroke="none"></rect>
<rect x="7" y="174" width="24" height="24" r="0" rx="0" ry="0" fill="#000000" stroke="none"></rect>
MORE SVG STUFF
<image x="35" y="0" width="600" height="769" preserveAspectRatio="none" xlink:href="https://s3.amazonaws.com/path/to/image.jpg"></image>
MORE SVG STUFF
</svg>
It's getting to the <image> tag in the <svg> tag that seems to be the issue. Does anyone know if CamanJS can work with this? Or if there's something similar out there that can work in this scenario?
use foreignObject and set height, width, x, and y positions as well
<svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="624" height="793" id="svg_3162" style="width: 639px;">
<desc>Created with Rapha�l</desc>
<defs></defs>
<rect x="15" y="150" width="24" height="24" r="0" rx="0" ry="0" fill="#ff0000" stroke="none"></rect>
<rect x="7" y="174" width="24" height="24" r="0" rx="0" ry="0" fill="#000000" stroke="none"></rect>
MORE SVG STUFF
MORE SVG STUFF
This is my code:
<?xml version="1.0">
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg width="100%" height="100%" viewBox="0 0 100 30" version="1.1">
<text id="t1" x="50%" y="50%" text-anchor="middle">Hello World</text>
<g transform="translate(0,0) rotate(0)">
<rect x="0" y="0" width="10" height="10" fill="blue" />
</g>
</svg>
This gives me hello world and a rectangle. I would like to know how to position my rectangle relative to my text. I thought this would do the trick, but according to my code above the rectangle should sit on top of the text but it does not.
Edit: I tried this but it didn't change anything:
<?xml version="1.0">
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg width="100%" height="100%" viewBox="0 0 100 30" version="1.1">
<g transform="translate(0,0) rotate(0)">
<rect x="0" y="0" width="10" height="10" fill="blue" />
</g>
<text id="t1" x="50%" y="50%" text-anchor="middle">Hello World</text>
</svg>
Is this close to what you want?
<svg width="100%" height="100%" viewBox="0 0 100 30" version="1.1">
<rect x="0" y="0" width="100%" height="100%" fill="blue" />
<text id="t1" x="50%" y="50%" text-anchor="middle" dy="0.3em">Hello World</text>
</svg>
The correct value to use for dy, to get the text vertically centred, is font specific. You may have to tweak that value to match whichever font you choose. In my opinion, it is a more reliable alternative to other solutions like alignment-baseline etc.
Another Approach you can try! Maybe It will fit for you ...
p {
font-size: 42px;
}
p>svg {
width: 60px;
height: 60px;
display: inline-block;
position: relative;
top: 28px;
}
<div style="display:none">
<svg width="100%" height="100%" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<symbol viewBox="0 0 20 20" id="box">
<g transform="translate(0,0) rotate(0)">
<rect x="0" y="0" width="12" height="12" fill="blue" />
</g>
</symbol>
</svg>
</div>
<p>
<svg>
<use xlink:href="#box"></use>
</svg> Hello World
</p>
How would I fill an SVG shape, not with a single colour, an image or a gradient, but with a hatching pattern, diagonal if possible.
It's been 2 hours and I've found nothing (at least after 2005).
I figure a possible hack would be a hatched PNG that would serve as fill, but that is not ideal.
I did not find anything for diagonal hatching on the internet either, so I'll share my solution here:
<pattern id="diagonalHatch" patternUnits="userSpaceOnUse" width="4" height="4">
<path d="M-1,1 l2,-2
M0,4 l4,-4
M3,5 l2,-2"
style="stroke:black; stroke-width:1" />
</pattern>
(note the lower case "l" in the path expression)
The above creates a hatch with diagonal lines from the lower left to the upper right that are 4 pixels apart. Besides the diagonal line (M0,4 l4,-4) you also have to stroke the upper left and the lower right edges of the pattern area, since the line will otherwise be "constricted" due to clipping where it intersects the edges of the square.
To fill a rectangle with this pattern, do:
<rect x="0" y="0" width="100%" height="100%" fill="url(#diagonalHatch)"/>
Use the patternTransform attribute to rotate a vertical (or horizontal) line segment. This method tiles seamlessly and uses the simplest possible path. The pattern width attribute controls how close parallel hatches are.
<pattern id="diagonalHatch" width="10" height="10" patternTransform="rotate(45 0 0)" patternUnits="userSpaceOnUse">
<line x1="0" y1="0" x2="0" y2="10" style="stroke:black; stroke-width:1" />
</pattern>
This code from http://bl.ocks.org/jfsiii/7772281 seems very clean and reusable:
svg {
width: 500px;
height: 500px;
}
rect.hbar {
mask: url(#mask-stripe)
}
.thing-1 {
fill: blue;
}
.thing-2 {
fill: green;
}
<!DOCTYPE html>
<html>
<head>
<meta charset=utf-8 />
<title>SVG colored patterns via mask</title>
</head>
<body>
<svg>
<defs>
<pattern id="pattern-stripe"
width="4" height="4"
patternUnits="userSpaceOnUse"
patternTransform="rotate(45)">
<rect width="2" height="4" transform="translate(0,0)" fill="white"></rect>
</pattern>
<mask id="mask-stripe">
<rect x="0" y="0" width="100%" height="100%" fill="url(#pattern-stripe)" />
</mask>
</defs>
<!-- bar chart -->
<rect class="hbar thing-2" x="0" y="0" width="50" height="100"></rect>
<rect class="hbar thing-2" x="51" y="50" width="50" height="50"></rect>
<rect class="hbar thing-2" x="102" y="25" width="50" height="75"></rect>
<!-- horizontal bar chart -->
<rect class="hbar thing-1" x="0" y="200" width="10" height="50"></rect>
<rect class="hbar thing-1" x="0" y="251" width="123" height="50"></rect>
<rect class="hbar thing-1" x="0" y="302" width="41" height="50"></rect>
</svg>
</body>
</html>
You may be able to create, what you want using a <pattern> tag.
As a starting point you might take this example of the respective MDN docu:
<?xml version="1.0"?>
<svg width="120" height="120" viewBox="0 0 120 120"
xmlns="http://www.w3.org/2000/svg" version="1.1"
xmlns:xlink="http://www.w3.org/1999/xlink">
<defs>
<pattern id="Triangle"
width="10" height="10"
patternUnits="userSpaceOnUse">
<polygon points="5,0 10,10 0,10"/>
</pattern>
</defs>
<circle cx="60" cy="60" r="50"
fill="url(#Triangle)"/>
</svg>
One problem with drawing a diagonal line within a pattern is that when the pattern is tiled the lines won't always line up - especially at high zooms. (It depends on the SVG rendering engine you happen to be using).
#Ingo's answer above attempts to resolve this by drawing in the triangles at the top-left and bottom-right corners - but again, using some rendering engines and high zooms, it doesn't always look best - and sometimes the line ends up looking a bit like a string of sausages.
Another approach is to draw a horizontal line in the pattern and rotate the pattern, e.g.
<svg:svg viewBox="0 0 100 100" version="1.1"
xmlns:svg="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink">
<svg:defs>
<svg:pattern id="diagonalHatch" patternUnits="userSpaceOnUse" width="4" height="4" patternTransform="rotate(45 2 2)">
<svg:path d="M -1,2 l 6,0" stroke="#000000" stroke-width="1"/>
</svg:pattern>
</svg:defs>
<svg:rect x="0" y="0" height="100" width="100" fill="url(#diagonalHatch)"/>
These two resources are very helpful:
https://bocoup.com/weblog/using-svg-patterns-as-fills
https://github.com/iros/patternfills/blob/master/public/patterns.css
For example:
<svg xmlns='http://www.w3.org/2000/svg' width='10' height='10'>
<rect width='10' height='10' fill='red'/>
<path d='M-1,1 l2,-2
M0,10 l10,-10
M9,11 l2,-2' stroke='orange' stroke-width='2'/>
</svg>
This is a solution for diagonal lines using circle in pattern. You can change angle as per your requirements.
<svg width="500" height="500">
<defs>
<pattern id="transformedPattern"
x="0" y="0" width="2" height="20"
patternUnits="userSpaceOnUse"
patternTransform="rotate(45)">
<circle cx="1" cy="1" r="2" style="stroke: none; fill: #0000ff" />
</pattern>
</defs>
<rect x="10" y="10" width="100" height="100"
style="stroke: #000000; fill: url(#transformedPattern);" />
</svg>
I tried with this sample. Hopefully, It can help you much.
<!DOCTYPE html>
<html>
<head>
<meta charset=utf-8 />
<title>SVG colored patterns via mask</title>
</head>
<body>
<svg viewBox="0 0 300 300" xmlns="http://www.w3.org/2000/svg">
<defs>
<pattern id="stripes" viewBox="0,0,8,8" width="16" height="16" patternUnits="userSpaceOnUse">
<polygon points="0,0 4,0 0,4" fill="yellow"></polygon>
<polygon points="0,8 8,0 8,4 4,8" fill="yellow"></polygon>
<polygon points="0,4 0,8 8,0 4,0" fill="green"></polygon>
<polygon points="4,8 8,8 8,4" fill="green"></polygon>
</pattern>
</defs>
<rect fill="url(#stripes)" x="150" y="20" width="100" height="50" />
<circle cx="50" cy="50" r="50" fill="url(#stripes)"/>
</svg>
</body>
</html>
Regards,
Vu Phan
SVG 2 has a hatch entity for specifically this purpose. From that page's example section:
<hatch hatchUnits="userSpaceOnUse" pitch="5" rotate="135">
<hatchpath stroke="#a080ff" stroke-width="2"/>
</hatch>
This is a very easily configurable way to create hatches:
Furthermore the hatch path can also be customised:
<hatchpath stroke-width="1" d="C 0,4 8,6 8,10 8,14 0,16 0,20"/>
For React Native use can use this component, for making background lines pattern.
You should add to your project react-native-svg
import PropTypes from 'prop-types';
import React, { PureComponent } from "react";
import { View } from "react-native";
import Svg, { Defs, Line, Pattern, Rect } from 'react-native-svg';
export default class PatternLineView extends PureComponent {
static propTypes = {
pattern: PropTypes.func.isRequired,
space: PropTypes.number,
backgroundColor: PropTypes.string,
lineColor: PropTypes.string,
lineWidth: PropTypes.number,
rotation: PropTypes.number
}
static defaultProps = {
pattern: () => { },
space: 8,
lineColor: "#D2D9E5",
lineWidth: 3,
rotation: 45
}
render() {
const transform = `rotate(${this.props.rotation})`
return <View style={{
flex: 1,
flexDirection: "row",
height: "100%",
width: "100%",
position: "absolute",
top: 0,
start: 0,
backgroundColor: this.props.backgroundColor
}}>
<Svg width="100%" height="100%">
<Defs>
<Pattern
id="linePattern"
patternUnits="userSpaceOnUse"
patternTransform={transform}
width={this.props.space}
height={this.props.space}>
<Line
x1="0"
y1="0"
x2="0"
y2="100%"
stroke={this.props.lineColor}
strokeWidth={this.props.lineWidth}
/>
</Pattern>
</Defs>
<Rect
fill="url(#linePattern)"
x="0"
y="0"
width="100%"
height="100%"
/>
</Svg>
</View>
}
}
I've adapted Ingo's answer here.
<defs>
<pattern id="diagonalHatch" patternUnits="userSpaceOnUse" width="4" height="4">
<!-- background -->
<path id="background"
d="M-1,3 L3,-1
M1,5 L5,1" style="stroke:pink; stroke-width:10" />
<!-- hatches -->
<path id="hatches"
d="M-2,2 L2,-2
M0,4 L4,0
M2,6 L6,2" style="stroke:red; stroke-width:1" />
</pattern>
</defs>
This pattern includes two paths, one for the background, and other for the hatches. The background color is addressable vs JS such as:
const hatchPath = document.querySelector("path#hatches");
hatchPath.setAttribute('style', "stroke:blue; stroke-width:1")
The background path is overly-wide on purpose, so that there's no part of the pattern not at least covered by the background. Meanwhile, the hatches can have their width tuned to change how thick the lines are.
Some great points got lost in the comments, so I wanted to aggregate that knowledge with some simpler inline examples. As far as I can tell, what method you choose to use is entirely up to preference since the heavy lifting is being done by patternTransform + rotate either way, but personally I think the <rect> method is easier to digest at-a-glance even if it might make more semantic sense to use <line>.
SVG Non-Scaling Pattern with <rect>
Define the spacing between your lines with the <pattern>'s width, and the width of the lines themselves via the nested <rect>'s width.
Codepen example as full-size background.
<svg height="100%" width="100%" xmlns="http://www.w3.org/2000/svg">
<pattern id="diaHatch" width="9" height="1" patternUnits="userSpaceOnUse" patternTransform="rotate(45)">
<rect x="0" y="0" width="3" height="1" fill="red" />
</pattern>
<rect x="0" y="0" width="100%" height="100%" fill="url(#diaHatch)" />
</svg>
SVG Non-Scaling Pattern with <line>
Define the spacing between the <line>s with the pattern height, and use stroke-width for the <line> itself.
Codepen example as full-size background.
<svg height="100%" width="100%" xmlns="http://www.w3.org/2000/svg">
<pattern id="diaHatch" width="1" height="9" patternUnits="userSpaceOnUse" patternTransform="rotate(45)">
<line x1="0" x2="100%" y1="0" y2="0" stroke-width="9" stroke="black" />
</pattern>
<rect x="0" y="0" width="100%" height="100%" fill="url(#diaHatch)" />
</svg>
On SVG 2 & Hatches [as of October 2022]
While the above examples solve the issue, SVG 2's Hatches (Candidate Recommendation 2016) are a documented method of tackling this exact issue. Inkscape happens to implement them because one of its developers, Tavmjong Bah, was an Invited Expert at the time, but browsers are still tackling them. To note, the latest Editor's Draft (2018) doesn't include hatch, which doesn't necessarily mean anything, but might be why it hasn't yet been prioritized by browser vendors.
Tracking SVG 2 Features for the Browser
Each major engine has an ongoing thread for feature implementations:
SVG 2 in Gecko
SVG 2 in Blink
SVG 2 in Webkit