Excel Time Comparison and Subtraction - excel

I am trying to do a time subtraction in excel of 30 minutes and I am running into a speed bump. So the table I have are as follows.
Table "Schedule"
Column 1 is day of the week (Mon-Sun) (formated as general, as this is plain text)
Column 2 is start time of the shift (formated as h:mm AM/PM)
Column 3 is end time of the shift (formated as h:mm AM/PM)
Column 4 is duration of the shift (start to end) (formated by formula (TEXT(col3-col2,"h:mm")) )
Column 5 is paid hours (if the total hours is over 6.5 then subtract 0.5 hours for an unpaid lunch) (formula IF(col5>"6:30",col5-"0:30",D5) )
The issue is any time allotment over 10 hours start to end (where column 4, the duration hits 10 hours) no lunch is subtracted at all.
So...
Start 9:00 AM, End 6:59 PM, Hours Total 9:59, Hours Paid 9:29
But...
Start 9:00 AM, End 7:00 PM, Hours Total 10:00, Hours Paid 10:00
and that should obviously not happen. I can't find anything on google so I figured the excel gurus here may have some advice.
Thanks!

If your time columns are stores using excel's dedicated time format, this should be straightforward. Mixed data types are likely your problem.
First, be sure your time columns (columns 2 and 3) are set using the time function, i.e.,
=time(hours,minutes,seconds)
Then, you should be able to add and subtract easily.
Column 4: = column 3 - column 2
... then subtract 30 minutes also using the time() function:
Column 5: = if(column 4 > time(6,30,0),column 4 -time(0,30,0),column 4)

Excel stores time values from 0 to 1. So 24 hours=1, 12 hours=.5 etc. That means 6.5 hours=0.270833333 and .5 hours=0.020833333. As a result you can just do a simple if statement.
=IF(D2>0.270833333,D2-0.020833333,D2)
To turn it into a time format, is to just use excel's time formating options.

Related

Is there any function in excel to find day time between two date and time in Excel?

I need a formula to calculate between two date and time excluding lunch time, holidays, weekend and between 09:00 and 18:00 work hours.
For example, 25/07/2022 12:00 and 29/07/2022 10:00 and answer has to be 1 day, 06:00
Thanks in advance.
I had a formula but it didn't work when hours bigger than 24 hours.
I don't know how you got to 1 day and 6 hours, but here is a customizable way to filter your time difference calculation:
=LET(
start,E3,
end,E4,
holidays,$B$3:$B$5,
array,SEQUENCE(INT(end)-INT(start)+1,24,INT(start),TIME(1,0,0)),
crit_1,array>=start,
crit_2,array<=end,
crit_3,WEEKDAY(array,2)<6,
crit_4,HOUR(array)>=9,
crit_5,HOUR(array)<=18,
crit_6,HOUR(array)<>13,
crit_7,ISERROR(MATCH(DATE(YEAR(array),MONTH(array),DAY(array)),holidays,0)),
result,SUM(crit_1*crit_2*crit_3*crit_4*crit_5*crit_6*crit_7),
result
)
Limitation
This solution only works on an hourly level, i.e. the start and end dates and times will only be considered on a full hour basis. When providing times like 12:45 as input, the 15 minute increment won't be accounted for.
Explanation
The 4th item in the LET() function SEQUENCE(INT(end)-INT(start)+1,24,INT(start),TIME(1,0,0)) creates an array that contains all hours within the start and end date of the range:
(transposed for illustrative purposes)
then, based on that array, the different 'crit_n' statements are the individual criteria you mentioned. For example, crit_1,array>=start means that only the dates and times after the start date and time will be counted, or crit_6,HOUR(array)<>13 is the lunch break (assuming the 13th hour is lunch time), ...
All of the individual crit_n's are then arrays of the same size containing TRUE and FALSE elements.
At the end of the LET() function, by multiplying all the individual crit_n arrays, the product returns a single array that will then only contain those hours where all individual criteria statements are TRUE:
So then the SUM() function is simply returning the total number of hours that fit all criteria.
Example
I assumed lunch hour to be hour 13, and I assumed the 28th to be a holiday within the given range. With those assumptions and the other criteria you already specified above, I'm getting the following result:
Which looks like this when going into the formula bar:
In cell G2, you can put the following formula:
=LET(from,A2:A4,to,B2:B4,holidays,C2:C2,startHr,E1,endHr,E2, lunchS, E3, lunchE, E4,
CALC, LAMBDA(date,isFrom, LET(noWkDay, NETWORKDAYS(date,date,holidays)=0,
IF(noWkDay, 0, LET(d, INT(date), start, d + startHr, end, d + endHr,
noOverlap, IF(isFrom, date > end, date < start), lunchDur, lunchE-lunchS,
ls, d + lunchS, le, d + lunchE,
isInner, IF(isFrom, date > start, date < end),
diff, IF(isFrom, end-date-1 - IF(date < ls, lunchDur, 0),
date-start-1 - IF(date > le, lunchDur, 0)),
IF(noOverlap, -1, IF(isInner, diff, 0)))))),
MAP(from,to,LAMBDA(ff,tt, LET(wkdays, NETWORKDAYS(ff,tt,holidays),
duration, wkdays + CALC(ff, TRUE) + CALC(tt, FALSE),
days, INT(duration), time, duration - TRUNC(duration),
TEXT(days, "d") &" days "& TEXT(time, "hh:mm") &" hrs "
)))
)
and here is the output:
Explanation
Used LET function for easy reading and composition. The main idea is first to calculate the number of working days excluding holidays from column value to to column value. We use for that NETWORKDAYS function. Once we have this value for each row, we need to adjust it considering the first day and last day of the interval, in case we cannot count as a full day and instead considering hours. For inner days (not start/end of the interval) it is counted as an entire day.
We use MAP function to do the calculation over all values of from and to names. For each corresponding value (ff, tt) we calculate the working days (wkdays). Once we have this value, we use the user LAMBDA function CALC to adjust it. The function has a second input argument isFrom to consider both scenarios, i.e. adjustment at the beginning of the interval (isFrom = TRUE) or to the end of the interval (isFrom=FALSE). The first input argument is the given date.
In case the input date of CALC is a non working day, we don't need to make any adjustment. We check it with the name noWkDay. If that is not the case, then we need we need to determine if there is no overlap (noOverlap):
IF(isFrom, date > end, date < start)
where start, end names correspond to the same date as date, but with different hours corresponding to start Hr and end Hr (E1:E2). For example for the first row, there is no overlap, because the end date doesn't have hour information, i.e. (12:00 AM), in such case the corresponding date should not be taken into account and CALC returns -1, i.e. one day needs to be subtracted.
In case we have overlap, then we need to consider the case the working hours are lower than the maximum working hours (from 9:00 to 18:00). It is identified with the name isInner. If that is the case, we calculate the actual hours. We need to subtract 1 because it is going to be one less full working day and instead to consider the corresponding hours (that should be less than 9hrs, which is the maximum workday duration). The calculation is carried under the name diff:
IF(isFrom, end-date-1 - IF(date < ls, lunchDur, 0),
date-start-1 - IF(date > le, lunchDur, 0))
If the actual start is before the start of the lunch time (ls), then we need to subtract lunch duration (lunchDur). Similarly if the actual end is is after lunch time, we need to discount it too.
Finally, we use CALC to calculate the interval duration:
wkdays + CALC(ff, TRUE) + CALC(tt, FALSE)
Once we have this information, it is just to put in the specified format indicating days and hours.
Now let's review some of the sample input data and results:
The interval starts on Monday 7/25 and ends on Friday 7/29, therefore we have 5 working days, but 7/26 is a holiday, so the maximum number of working days will be 4 days.
For the interval [7/25, 7/29] starts and ends on midnight (12:00 AM), therefore the last day of the interval should not be considered, so actual working days will be 3.
Interval [7/25 10:00, 7/29 17:00]. For the start of the interval we cannot count one day, instead 8hrs and for the end of the interval, the same situation 8hrs, so instead of 4days we are goin to have 2days plus 16hrs, but we need to subtract in both cases the lunch duration (1hr) so the final result will be 2 days 14hrs.

Excel formula to calculate elapsed minutes between 2 date timestamps only counting minutes during work hours

I have an excel sheet with about 50,000 records where I need to find the number of minutes between two date timestamps but I need to exclude any minutes that occurred during the times we are not working.
Our schedule is M-F 8:30am-5:30pm, Saturdays 8:30am-1:30pm
We don't work Sundays or holidays.
As an example
Cell B2: [7/3/2020 2:16:21 PM]
Cell C2: [7/6/2020 9:20:23 AM]
The manually calculated answer for this one should be about 244 minutes. Task started Friday afternoon, Saturday was a holiday, don't work Sundays, task completed at 9:20am on Monday.
Usually, I come here and start writing a question and by the time I've understood my own problem well enough to post a question I have figured it out on my own but not this time! Help!
Update:
#ForwardEd shared this...
=((I2-H2)
-MAX(0,(NETWORKDAYS.INTL(H2,I2,"0000011",$M$2:$M$12)-1+(WEEKDAY(I2,1)=7)))*TIME(15,0,0)
-MAX(0,(NETWORKDAYS.INTL(H2,I2,"1111101",$M$2:$M$12)-(WEEKDAY(I2,1)=7)))*TIME(19,0,0)
-NETWORKDAYS.INTL(H2,I2,"1111110",$M$2:$M$12)-(NETWORKDAYS.INTL(H2,I2,"0000000")
-NETWORKDAYS.INTL(H2,I2,"0000000",$M$2:$M$12)))*24*60
Where H:H is the Start Date Timestamp and I:I is the Response Date Timestamp and M2:M12 contains my holiday list.
It worked beautifully until I ran into an example like this:
H2 - 07/26/2020 7:48:45 PM
I2 - 07/27/2020 8:57:58 AM
The net result was -650.78333. It looks like anything that starts one one day and ends on the next is coming back as negative.
We want to measure the average response time in minutes for the applications that require manual underwriting. These start timestamps are times that loan applications were received online so they could come in any time of day. The stop times are timestamps that represent the system recorded response time. i.e. the timestamp where an underwriter first did something with the loan application. If a loan application was received at 7pm and was not auto-decisioned then a manual underwriter will need to do something with it the next day when we start working.
If that application came in at 7pm on Wed and is decisioned by an underwriter at 8:46am on Tuursday, we would want to document 16 minutes for that application - not 826 counting the hours between 7pm and 8:30am.
What you want to look at is NETWORKDAYS.INTL. Use this in conjunction with the custom settings to determine the number of Saturdays, Sundays and for the number of days in between your start and end time. You know you have X amount of time per day that is non working time, and Y amount per Saturday.
Then you formula in essence becomes
(End time - start time) - X * No. Weekdays - Y * No. Saturdays - No. Sundays - No. Holidays
Now there will be some tricks in there in order to count your days. but that is the gist of what it boils down to in a formula.
The formulas that are doing the brunt of the work are:
WORKDAY
NETWORKDAYS.INTL
TIME
I avoided the use of an if statement by using a boolean operation that excel will resolve from TRUE/FALSE to 1/0 when sent through a math operator. Side note: I read somewhere that this is also faster than an IF statement, but have no way of proving it and really does not matter on a small number of calculations.
WORKDAY
This formula will return the day of the week for a given date, and a set day of the week to be 1. It will be need in this solution to determine if the end date is a Saturday which has a value of 7 in default setup up as well when option 1 is picked. The format for the formula is:
WORKDAY(Excel Serial date, day 1 of the week)
For this solution
WEEKDAY(B3,1)
NETWORKDAYS.INTL
This formula will be used to count the number of specific days a start and an end date. It can exclude a custom weekend or count a custom week. If it is supplied with a list of dates that are holidays they can be excluded as well. The basic format of the formula is:
NETWORKDAYS.INTL(Start Date, End Date, Custom week choice or workweek pattern, range of holiday dates)
When entering the formula it will give you a list of predefined options for the weekend choices. It will not talk about the pattern.
The pattern is a string 7 digits long consisting of 1 or 0. 0's represents the days you want to count and 1's are days you want to ignore. An important part of the pattern is that the first entry is MONDAY. "1010111" would count only Tuesdays and Thursdays.
TIME
Excel stores date as an integer. 1 represents 1st of January 1900, 2 the 2nd of January 1900 and so on. Time is stored as a decimal or if you prefer the percentage/fraction of a day or 24 hour period. So rather than figuring out the math to determine what percentage of a day X number of hours is, it is simpler to let excel calculate it for us and make the number a little more understandable to someone who may be deciphering the formula later. The basic format of the formula is:
TIME(Hours, Minutes, Seconds)
So as stated earlier, 6 key components need to be determined:
X - Amount of non working time after a weekday
Y - Amount of non working time after a Saturday
Number of weekdays
Number of Saturdays
Number of Sundays
Number of holidays
1) Determine Weekday Non-Working Hours
Based on the supplied information that work day stops at 1730 and starts as 0830. There are a couple of ways of doing the math. Subtract the working hours from 24 hours or count the non work hours at the end of the day and add them to the non work hours at the start of the day.
24 - (17.5 - 8.5) = 15
or
(24 - 17.5) + (8.5 - 0) = 15
For this example 15 will be hard coded into the final formula
2) Determine Saturday Non-Working Hours
Similar to above. Note that we are ignoring Sunday as it is a designated non working day which we already know is 24 hours or 1 day. We are just interested in the time between end of shift Saturday and start of the next normal working Monday. So it really gets calculated the same with just with difference end of shift time.
24 - (13.5 - 8.5) = 19
or
(24- 13.5) - (8.5 - 0) = 19
For this example 19 will be hard coded into the final formula
3) Determine Number of Weekdays
Based on the description earlier of of NETWORKDAYS.INT and working with the assumption that holidays are stored in the range F2:F2, and using a pattern of "0000011" the number of weekdays the formula will be as follows:
=NETWORKDAYS.INTL(B2,B3,"0000011",F2)
For this example the formula is place in cell F6
4) Determine Number of Saturdays
Similar 3) adjust the pattern to only select Saturdays by using "1111101"
=NETWORKDAYS.INTL(B2,B3,"1111101",F2)
For this example the formula is place in cell F7
5) Determine Number of Sundays
Similar 4) adjust the pattern to only select Saturdays by using "1111110"
=NETWORKDAYS.INTL(B2,B3,"1111110",F2)
For this example the formula is place in cell F8
6) Determine Number of Holidays
To get the number of holidays there is not a direct way of doing it. Instead take the difference between all days counted without holidays being factored in and all days counted with holidays counted in.
=NETWORKDAYS.INTL(B2,B3,"0000000")-NETWORKDAYS.INTL(B2,B3,"0000000",$F$2:F2)
For this example the formula is place in cell F9
Now at this point I would love to say just substitute all of the above into the generic formula, but there are a couple of special cases that need to be taken care of. You may have also noted I have not used the WEEKDAY formula yet.
So in order to count the number of days to which X is going to apply, its really the number of days minus 1. The minus 1 is because you want to cont the intervals between days, not the number of days themselves. This gets a little bit more trickier when the end day is a Saturday because there is still an interval there but Saturday is not counted as a weekday. So the True count for number of weekday intervals is:
=MAX(0,(F6-1+(WEEKDAY(B3,1)=7)))
I originally had the MAX(0, calc) in there to prevent the posibility of the day count being negative. After arriving at this final format it may not be needed and you might get away with the following but its untested:
=F6-1+(WEEKDAY(B3,1)=7)
This same concept needs to be applied to your Saturday count. If you job ends on Saturday you do not need to subtract the non working hours after the last Saturday. You formula will look like:
=MAX(0,(F7-(WEEKDAY(B3,1)=7)))
and again further testing is required to make sure MAX can be removed, but if it can then the formula would look like:
=F7-(WEEKDAY(B3,1)=7)
So now with the understanding how dates and times are stored, determine the time difference between start end end time and subtract all the non working hours.
=(B3-B2)-MAX(0,(F6-1+(WEEKDAY(B3,1)=7)))*TIME(15,0,0)-MAX(0,(F7-(WEEKDAY(B3,1)=7)))*TIME(19,0,0)-F8-F9
Now you will not want to use helper cells, so you can take each of the individual formula from F6 to F9 and wind up with:
=(B3-B2)-MAX(0,(NETWORKDAYS.INTL(B2,B3,"0000011",F2)-1+(WEEKDAY(B3,1)=7)))*TIME(15,0,0)-MAX(0,(NETWORKDAYS.INTL(B2,B3,"1111101",F2)-(WEEKDAY(B3,1)=7)))*TIME(19,0,0)-NETWORKDAYS.INTL(B2,B3,"1111110",F2)-(NETWORKDAYS.INTL(B2,B3,"0000000")-NETWORKDAYS.INTL(B2,B3,"0000000",$F$2:F2))
The formula looks unruly, but is easier to understand when broken down into its parts.
Now the last step is to get the answer to display in minutes. There are two choices.
You can leave it as it is in an excel serial date format and change the formatting of to a custom format of [m]. The [ ] will force it into minutes and prevent spill over to hours. It will also round to the nearest minute.
You can convert the results to minutes by multiplying by 24*60 and the value will be in minutes and decimal of minutes.
Note that:
A11 has Time formatting applied
A12 has General formatting applied
A14 has custom formatting of [m] applied
It should be something like this:
Create a calendar table with the workinghours for each days in the year you have data in
Date | StartTime | End time
1/1/2020 1/1/2020 8:30:00 PM 1/1/2020 5:30:00 PM
...
7/3/2020 7/3/2020 8:30:00 PM 7/6/2020 5:30:00 PM
...
12/31/2020
Then paste this code in a module
Function CalcDays(dStart As Date, dEnd As Date, daysCalendar As Range)
Dim Cell As Range
Dim MinDaysCalendar As Date, MaxDaysCalendar As Date
Dim aWSF As WorksheetFunction
Set aWSF = Application.WorksheetFunction
'check the minimum en the maximum date in the calendar
With aWSF
MinDaysCalendar = .Min(daysCalendar)
MaxDaysCalendar = .Max(daysCalendar)
End With
'if the date you check is not in the calendar, exit the function
If dStart < MinDaysCalendar Or dStart > MaxDaysCalendar Then
MsgBox "Date not in calendar"
Exit Function
End If
If dEnd < MinDaysCalendar Or dEnd > MaxDaysCalendar Then
MsgBox "date not in calendar"
Exit Function
End If
'sum the time of all the dates between the start and the end
'pick min and max in order to start and stop at the right time per day
Dim tempTime As Integer
With daysCalendar
For i = 1 To .Rows.Count
If .Cells(i, 2).Value >= CLng(dStart) And .Cells(i, 3).Value <= CLng(dEnd) Then
daytime = aWSF.Max(.Cells(i, 2).Value, dStart) - aWSF.Min(.Cells(i, 3).Value, dEnd)
End If
tempTime = tempTime + daytime
Next i
End With
'return the total time
CalcDays = tempTime
End Function
You can call the function by typing =calcdays in a cell and then give the startDay, endDay and calendar column as parameters.
There might still be some flaws in this code but I think we can manage those.

Google Sheets or Excel Function to return date based on value

I have this table in Google Sheets (or excel). The year is the two last digit of my code.
Code Duration Months
1 AC-26482-17 60
2 AC-26482-18 30
3
I would like to return the date in this format (If no data, just leave blanks).
Code Duration Months Start Expiration
1 AC-26482-17 60 01/01/2017 01/01/2022
2 AC-26482-18 30 01/01/2018 01/07/2020
3
Is there a way to achieve this?
You mean you want to add the duration in months to the start date? If so, your sample has the wrong expiration date. 30 months added to 1/1/2018 is not June 1st, but July 1st.
The formula in Excel is
=EDATE(C2,B2)
If you also want to calculate the start date from the last two characters of the code, given all dates are in this millennium, then you can use this for the start date:
=DATE(RIGHT(A2,2)+2000,1,1)
edit: To handle blank cells, you can check with IsBlank()
=if(isblank(a2),"",DATE(RIGHT(A2,2)+2000,1,1))
use:
=ARRAYFORMULA(IF(A2:A="",,DATE(IF(RIGHT(A2:A, 2)*1>=40,,20)&RIGHT(A2:A, 2), 1, 1)))
=ARRAYFORMULA(IF(A2:A="",,DATE(YEAR(C2:C), MONTH(C2:C)+B2:B, 1)))

How to count hours in excel

I have xls file in following format
Name 1 2 3 4
John 09:00-21:00 09:00-21:00
Amy 21:00-09:00 09:00-21:00
Where 1,2,3,4 and so on represent days of current month,
09:00-21:00 - working hours.
I want to calculate salary based on the following conditions:
09:00-21:00 - 10$/hour
21:00-00:00 - 15$/hour
00:00-03:00 - 20$/hour
etc.
and so on (every hour can have it's own cost, for example 03:00-04:00 - 20$/hour, 04:00-05:00 - 19$/hour, etc.)
How can i accomplish this using only Excel (functions or VBA)?
P.S. Easy way: export to csv and process in python/php/etc.
Here is a non-VBA solution. It's a pretty nasty formula, but it works. I am sure it could be made even easier to use and understand with some more ingenuity:
Assuming the spreadsheet is set up like this:
Enter this formula in cell G1 and drag down for your data set:
=IF(ISBLANK(B2),"",IF(LEFT(B2,2)<MID(B2,FIND("-",B2)+1,2),SUMIFS($P$2:$P$24,$Q$2:$Q$24,">="&LEFT(B2,2),$Q$2:$Q$24,"<="&MID(B2,FIND("-",B2)+1,2)),SUMIF($Q$2:$Q$24,"<="&MID(B2,FIND("-",B2)+1,2),$P$2:$P$24)+SUMIF($Q$2:$Q$24,">="&LEFT(B2,2),$P$2:$P$24)))
To explain the formula in detail:
IF(ISBLANK(B2),"" will return a empty string if there is no time for a given person / day combination.
LEFT(B2,2) extracts the start-time into an hour.
Mid(B2,Find("-",B2)+1,2) extracts the end-time into an hour.
IF(LEFT(B2,2)<MID(B2,FIND("-",B2)+1,2) will check if the start-time is less than the end-time (meaning no over-night work). If the start-time is less than the end-time, it will use this formula to calculate the total cost per hour: SUMIFS($P$2:$P$24,$Q$2:$Q$24,">="&LEFT(B3,2),$Q$2:$Q$24,"<="&MID(B3,FIND("-",B3)+1,2))
If the start-time is higher than the end-time (meaning overnight work), it will use this formula to calculate: SUMIF($Q$2:$Q$24,"<="&MID(B3,FIND("-",B3)+1,2),$P$2:$P$24)+SUMIF($Q$2:$Q$24,">="&LEFT(B3,2),$P$2:$P$24)
The use of the Find("-",[cell]) splits the start-and- end times into values excel can use to do math against the Time / Cost table.
The formula in column Q of the Time / Cost table is =VALUE(MID(O2,FIND("-",O2)+1,2)) and turns the ending hour to consider the cost into a value Excel can use to add, instead of having the text from your original source format.
Do this in VBA! It is native to excel and is easy to learn. Functionally, I would loop through the table, write a function to calculate the dollars earned based on the info given. If you want your results to be live updating (like a formula in excel) you can write a user defined function. A helpful function might be an HoursIntersect function, as below:
Public Function HoursIntersect(Period1Start As Date, Period1End As Date, _
Period2Start As Date, Period2End As Date) _
As Double
Dim result As Double
' Check if the ends are greater than the starts. If they are, assume we are rolling over to
' a new day
If Period1End < Period1Start Then Period1End = Period1End + 1
If Period2End < Period2Start Then Period2End = Period2End + 1
With WorksheetFunction
result = .Min(Period1End, Period2End) - .Max(Period1Start, Period2Start)
HoursIntersect = .Max(result, 0) * 24
End With
End Function
Then you can determine the start and end time by splitting the value on the "-" character. Then multiply each payment schedule by the hours worked within that time:
DollarsEarned = DollarsEarned + 20 * HoursIntersect(StartTime, EndTime, #00:00:00#, #03:00:00#)
DollarsEarned = DollarsEarned + 10 * HoursIntersect(StartTime, EndTime, #09:00:00#, #21:00:00#)
DollarsEarned = DollarsEarned + 15 * HoursIntersect(StartTime, EndTime, #21:00:00#, #00:00:00#)
I have a method that uses nothing but formulas. First create a lookup table which contains every hour and rate in say columns K & L, something like this:
K L
08:00 15
09:00 10
10:00 10
11:00 10
12:00 10
13:00 10
14:00 10
15:00 10
16:00 10
17:00 10
18:00 10
19:00 10
20:00 10
21:00 15
22:00 15
23:00 15
Make sure you enter the hours as text by entering a single quote before the digits.
Then if your hours were in cell B2 you could then use this formula to calculate the total:
=SUM(INDIRECT("L"&MATCH(LEFT(B2,5),K2:K40,0)&":L"&MATCH(RIGHT(B2,5),K2:K40,0)))
All the formula is doing is getting the left and right text of your work time, using MATCH to find their positions in the lookup table which is used to create a range address which is then passed to SUM via the INDIRECT function.
If you need to worry about minutes all you need to do is create a bigger lookup table which holds every minute of the day. You may need to add some extra logic if your work days span midnight.

Working Hours Excel Formula

I need to calculate the working hours elapsed between two dates and times, for example:
Holiday taken between 01/09/2014 and 05/09/2014
5 working days # 8 hours per day.
I need the result to show me how many working hours that would be. For example:
ANNUAL ENTITLEMENT: 89.9 Hours
DATE FROM DATE TO RETURN TO WORK HOURS REQUIRED HOURS REMAINING DATE
01/09/2014 05/09/2014 06/09/2014 40 49.90
I have no idea if this is even possible!
I am assuming these are given cells. if you type in the date to a cell you can click on a new cell and put uptop by the fx this
for example. In C1 you can type this into the fx. Make sure you put the equal sign.
=B1-A1
This is what is the dates in the cells
A1 = 1/9/2014
B1 = 5/9/2014
This will give you 120 which is the total days inbetween.
You will want to get the number of weeks so you can divide by 7.
You will multiply weeks by number of days worked which is 5
Then you want the weeks times 8 hours you can do this in C1
=(B1 - A1)/7 * 5 * 8
which gives you 685.7143
you need to also take into account weekends which a simple subtraction will not do. Firstly find the total number of days:
TOTAL_NUMBER_DAYS = B1-A1 + 1
then calculate how many weekends:
TOTAL_WEEKENDS = WEEKNUM(B1) - WEEKNUM(A1)
finally take the total days and subtract weekends:
NET_TOTAL_DAYS = TOTAL_NUMBER_DAYS - (TOTAL_WEEKENDS * 2)
TOTAL_HOURS = NET_TOTAL_DAYS * 8
I solved this recently and had a working solution initially in Excel 2013. Slightly adapted to work in 2007 (lack of 'Days()' function). We use it for reporting on support tickets (length of time between opening and closing a ticket).
Inputs are "Workday start", "Workday end" from which "Hours worked" and "Hours not worked" are calulated.
Hours worked =HOUR(WorkEnd-WorkStart)+(MINUTE(WorkEnd)+MINUTE(WorkStart))/60
Hours not worked = 24 - Hours worked
Further inputs are a table ("Data") with first two columns "Open" and "Close", which are dateserial cells.
Next column is standard numeric value "Gross hours" =(Data[[#This Row],[Close]]-Data[[#This Row],[Open]])*24
Next column is standard numeric value "Net workdays" =NETWORKDAYS(Data[[#This Row],[Open]],Data[[#This Row],[Close]])
Next column is standard numeric value "Net days" =MAX(1,DAY(Data[[#This Row],[Close]])-DAY(Data[[#This Row],[Open]]))
Next column is standard numeric value "Gross workhours" =IF(Data[[#This Row],[Gross hours]]>0,Data[[#This Row],[Gross hours]]-24*(Data[[#This Row],[Net days]]-Data[[#This Row],[Net workdays]]),0)
Last column is standard numeric value "Total work hours" =IF(Data[[#This Row],[Gross workhours]]<24,Data[[#This Row],[Gross workhours]],Data[[#This Row],[Gross workhours]]-(HoursNotWorked*Data[[#This Row],[Net workdays]]+HoursWorked))
This solution makes it trivial to adjust start and end work times, as well as accounting for any holidays (via a small change to the NETWORKDAYS() function to utilise the optional parameter).

Resources