Let's say I use findbyID{} to find a specific document in my collection, and this document has the value totalMedals to which I want to add the local variable medalsWonSinceLastUpdate. I would need a function along the lines of totalMedals = previousTotalMedals + medalsWonSinceLastUpdate, which would mean I need to capture the previous totalMedals in a variable. How would this be possible?
I have experimented with an ejs file that contains the value I want to access and then tried to access it through req.body.value, but this throws an error. I can run queries that find the documents, but I run into a brick wall when it comes to taking the variables to a wider scope.
Related
I am basically trying to save to data/${EPOCH_TIME}:
begin_unix_time: "J"$first system "date +%s"
\t:1 save `data/"string"$"begin_unix_time"
I am expecting it to save to data/1578377178
You do not need to cast first system "date +%s" to a long in this case, since you want to attach one string to another. Instead you can use
begin_unix_time:first system "date +%s"
to store the string of numbers:
q)begin_unix_time
"1578377547"
q)`$"data/",begin_unix_time
`data/1578377547
Here you use the comma , to join one string to another, then using cast `$ to convert the string to a symbol.
The keyword save is saving global data to a file. Given your filepath, it looks like youre trying to save down a global variable named 1578377547, and kdb can not handle variable names being purely numbers.
You might want to try saving a variable named a1578377547 instead, for example. This would change the above line to
q)`$"data/a",begin_unix_time
`data/a1578377547
and your save would work correctly, given that the global variable a1578377547 exists. Because you are sourcing the date down to the second from linux directly in the line you are saving a variable down to, this will likely not work, due to time constantly changing!
Also note that the timer system command will repeat it the execution n times (as in \t:n), meaning that the same variable will save down mutliple times given the second does not change. The time will also likely change for large n and you wont have anything assigned to the global variable you are trying to save should the second change.
I am trying to write a script which posts invoices in SAP through Excel (fairly new to this), and am running into the following error:
"The control could not be found by id".
The error is coming up at the below line:
session.FindById("wnd[0]/usr/subITEMS:SAPLFSKB:0100/tblSAPLFSKBTABLE/ctxtACGL_ITEM-HKONT[1,w_counter]").Text = w_glacc
Here, I am trying to pass the GL account number in the first row. There can be multiple rows, so I was hoping that instead of passing ctxtACGL_ITEM-HKONT[1,0]").Text, ctxtACGL_ITEM-HKONT[1,1]").Text etc. I wanted to initialize a counter and pass that value into this method.
Is there any way this can be achieved?
Found a solution:
Instead of passing just w_counter I had to pass "&w_counter&".
Previously, code was:
session.FindById("wnd[0]/usr/subITEMS:SAPLFSKB:0100/tblSAPLFSKBTABLE/ctxtACGL_ITEM-HKONT[1,w_counter]").Text = w_glacc
Now, it is:
session.FindById("wnd[0]/usr/subITEMS:SAPLFSKB:0100/tblSAPLFSKBTABLE/ctxtACGL_ITEM-HKONT[1,"& w_counter &"]").Text = w_glacc
I am stuck on a problem and I am not sure what is the best way to solve it. I have a date column that I want to select and I want to fetch it as a string. Which is great, node-oracledb module has this option with fetchAsString mehotd. But it fetches the date like this for example 10-JAN-16 and I want to fetch it like this 10-01-2016. Is there a way to do that from the node-oracledb module, or I should modify the date after I get the result from the query?
UPDATE: I mean solution without to_char in the query and without query modifications
Check out this section of my series on Working with Dates in JavaScript, JSON, and Oracle Database:
https://dzone.com/articles/working-with-dates-using-the-nodejs-driver
The logon trigger shows an example of using alter session to set the default date format. Keep in mind that there is NLS_DATE_FORMAT, NLS_TIMESTAMP_FORMAT, NLS_TIMESTAMP_TZ_FORMAT.
I only show NLS_TIMESTAMP_TZ_FORMAT because I convert to that type in the examples that follow as I need to do some time zone conversion for the date format I'm using.
Another way to set the NLS parameters is to use environment variables of the same name. Note that this method will not work unless you set the NLS_LANG environment variable as well.
I have been using NetSuite for only a short time, and already hate it. I am sorry if this is a stupid question, but I haven't been able to find an answer so far, either in the Netsuite docs, StackOverflow or other websites. In fact, the answers I found have resulted in an error.
My company requires a script to transfer inventory based on an EDI input file. Reading the file is no problem, even parsing it is working. However, actually inserting the data is proving problematic.
I have been able to insert normal records, but Inventory Transfer records are giving me problems.
From Stack Overflow I found and adapted some code into the following:
var xfer = nlapiCreateRecord("inventorytransfer");
xfer.setFieldValue("trandate", FormatDate("20160101"));
xfer.setFieldValue("location", 9);
xfer.setFieldValue("transferlocation", 9);
nlapiSelectNewLineItem('invt');
nlapiSetLineItemValue("invt","invtid",1, 189);
nlapiSetLineItemValue("invt","adjustqtyby", 1, "5");
nlapiCommitLineItem('invt');
var id = nlapiSubmitRecord(xfer);
The FormatDate function just exchanges the date from the text file into a system date NetSuite can understand.
However, when I run this code I get the following error:
USER_ERROR: You must enter at least one line item for this transaction.
I thought inserting the line item was the reason to use nlapiSelectNewLineItem, but I guess not. Also nlapiCreateNewLineItem doesn't seem to exist.
The values I am inserting are all just test data, as I'm testing this in the debugger. Location 9 exists, as does item 189.
My full script finds these id's based on string values from the text files. But since this is the section that doesn't work I have set it apart to test.
Can anyone help with this?
You did not specify the type of script you are using, but, looks like you are not setting the fields on the record object, but, setting the value on current record. Below, is the suggested code.
Also, there is no sublist named invt, it should be inventory. Also, there is no field as such invtid, I think most probably you want to setup item, the field Id should be item. You might want to refer SuiteScript Record Browser as well for a help on correct Ids
var xfer = nlapiCreateRecord("inventorytransfer");
xfer.setFieldValue("trandate", FormatDate("20160101"));
xfer.setFieldValue("location", 9);
xfer.setFieldValue("transferlocation", 9);
xfer.selectNewLineItem('inventory');
xfer.setCurrentLineItemValue("inventory", "item", 189);
xfer.setCurrentLineItemValue("inventory","adjustqtyby", "5");
xfer.commitLineItem('inventory');
var id = nlapiSubmitRecord(xfer);
If you are using Bin/Lot Numbered Items, please see help topic "Sample Scripts for Advanced Bin / Numbered Inventory Management"
Unfortunately we have a special folder named "_archive" in our repository everywhere.
This folder has its purpose. But: When searching for content/documents we want to exclude it and every content beneath "_archive".
So, what i want is to exclude the path and its member from all user searches. Syntax is easy with fts:
your_query AND -PATH:"//cm:_archive//*"
to test:
https://www.docdroid.net/RmKj9gB/search-test.pdf.html
take the pdf, put it into your repo twice:
/some_random_path/search-test.pdf
/some_random_path/_archive/search-test.pdf
In node-browser everything works as expected:
TEXT:"HODOR" AND -PATH:"//cm:_archive//*"
= 1 result
TEXT:"HODOR"
= 2 results
So, my idea was to edit search.get.config.xml and add the exclusion to the list of properties:
<search>
<default-operator>AND</default-operator>
<default-query-template>%(cm:name cm:title cm:description ia:whatEvent
ia:descriptionEvent lnk:title lnk:description TEXT TAG) AND -PATH:"//cm:_archive//*"
</default-query-template>
</search>
But it does not work as intended! As soon as i am using 'text:' or 'name:' in the search field, the exclusion seems to be ignored.
What other option do i have? Basically just want to add the exclusion to the base query after the default query template is used.
Version is Alfresco Community 5.0.d
thanks!
I guess you're mistaken what query templates are meant for. Take a look at the Wiki.
So what you're basically doing is programmatically saying I've got a keyword and I want to match the keywords to the following metadata fields.
Default it will match cm:name cm:title cm:description etc. This can be changed to a custom field or in other cases to ALL.
So putting an extra AND or here of whatever won't work, cause this isn't the actual query which will be built. I can go on more about the query templates, but that won't do you any good.
In your case you'll need to modify the search.get webscript of Alfresco and the method called function getSearchResults(params) in search.lib.js (which get's imported).
Somewhere in at the end of the method it will do the following:
ftsQuery = '(' + ftsQuery + ') AND -TYPE:"cm:thumbnail" AND -TYPE:"cm:failedThumbnail" AND -TYPE:"cm:rating" AND -TYPE:"st:site"' + ' AND -ASPECT:"st:siteContainer" AND -ASPECT:"sys:hidden" AND -cm:creator:system AND -QNAME:comment\\-*';
Just add your path to query to it and that will do.