Expected Requests and Response are showing after executing jmeter script in GUI mode but when the same is execcuted in non-gui mode, for few requests it shows "No data to display" and Response is empty.
This was encountered in jmeter v4. Can anybody help as in why such variance in requests when script is executed in non-gui mode?
enter image description here
enter image description here
This is done intentionally, JMeter removes request and especially response data from sample results (mainly because it cannot be stored in CSV format) in order to reduce memory consumption and disk IO required to aggregate and store the data.
If you really need to see request and response data you can "tell" JMeter to store it by adding the next lines to user.properties file (lives in "bin" folder of your JMeter installation)
jmeter.save.saveservice.output_format=xml
jmeter.save.saveservice.response_data=true
jmeter.save.saveservice.samplerData=true
jmeter.save.saveservice.requestHeaders=true
jmeter.save.saveservice.url=true
jmeter.save.saveservice.responseHeaders=true
JMeter restart will be required to pick the properties up. Once done - re-run the test and make sure to use the different output .jtl file (or delete the existing one) - this time it will have much more results suitable for displaying in the View Results Tree listener
References:
Configuring JMeter
Apache JMeter Properties Customization Guide
Results File Configuration
Related
I have a CSV file that I got from a website. I need to upload that same CSV file into my database using SQLLDR in ColdFusion. For some reason I'm not able to insert the data into database.
Below is my code. Using this code I was not able to insert the data into database from the CSV file. It is working file from a batch file, but it is not working using cfexecute. By that I mean, I'm getting a blank screen. No errors, no exceptions, nothing. Checked in the logs but I did not get any errors there either. Only thing what I can see is that the data is not inserted into the database.
FYI, we are using Linux environment, so the path is slightly different.
<cfset CTLPATH="/home/mosuser/apps/nodal/ctl">
<cfset LOGPATH="/home/mosuser/apps/nodal/logs">
<cfexecute name="/opt/oracle/product/12.1.0/client_1/bin/sqlldr"
arguments="userid/password#Sid control=#CTLPATH#/mpimReport.ctl
log=#LOGPATH#/#PathfileName#_load.log data=#filelist##PathfileName#.csv
bad=#LOGPATH#/#PathfileName#_error.txt">
</cfexecute>
Update:
As suggested, dumping the error variable qryerr showed:
Message 2100 not found; No message file for product=RDBMS,
facility=ULMessage 2100 not found; No message file for product=RDBMS,
facility=UL
Add a few parameters to your <cfexecute> call.
timeout - in the order of the number of seconds expect the process to take
variable - the name of the variable to hold the STDOUT output of sqlldr
errorVariable - name of the variable to hold the STDERR output of sqlldr
After doing that you can get the output of the call and inspect it for any error messages and other info.
Adding the timeout is the crucial step - this makes cfexecute block until either the program terminates or the timeout is reached. Without a timeout, ColdFusion simply kicks off the process and immediately continues executing the rest of the current page.
I am facing an issue that I could not understand how to resolve.
I created a test plan that need to connect DB and count the results.
The problem is that Jmeter not perform any validation afterwards, I created a JSSR223 in the JDBC request and just want to print the results and Jmeter not print.
I created another sampler to print the DB results and still Jmeter not printing.
Jmeter just passes this steps,
In the results tree I saw that it connects to DB and failed in the assertion, but why it passes the other steps? and just moving to debug sampler?
I can not print the results, I can not perform any debug since it is just black box.
can someone please advise?
you can see in yellow all the steps that Jmeter not performed and just not exists in the results tree.
enter image description here
Get used to check jmeter.log file, it normally contains information regarding what went wrong, you should be able to figure out the root cause by looking into the log file. If you are not - update your question with jmeter.log file contents (at least essential parts)
My expectation is that your ${Conv_sense} variable is not defined (or cannot be cast to Integer). Double check whether it is defined or not using Debug Sampler and View Results Tree listener combination.
Also don't refer JMeter Variables like ${Conv_sense} in Groovy scripts body, use vars.get('Conv_sense}') instead, otherwise it might conflict with Groovy GStringTemplate resulting in undefined behavior.
I am pushing logs to Elastic Search from Logstash and then i need to get back the logs in the order they were written. Sorting by time stamp does not help because there could me multiple log statements in the same time. I followed the solution in Include monotonically increasing value in logstash field? and it worked perfectly in my windows system.
But when the code was moved to the linux production environment, logstash is not starting up. Failing with the below error
reason=>"Couldn't find any filter plugin named 'seq'. Are you sure
this is correct? Trying to load the seq filter plugin resulted in this
error: no such file to load -- logstash/filters/seq", :level=>:error}
Check if the seq.rb file is in the filter folder.
Also check if the line ending of your seq.rb are linux. If you transferred the file from a windows machine to a linux, the problem might come from here.
I am loading DBPedia (file by file) into Virtuoso using the standard ld_dir command in isql.
Question: Is there a way to monitor the progress of loading a single file?
I understand that select ll_file, ll_status from db.dba.load_list; gives 1 for files that are in progress, and status() displays the current active statements and their running times.
The best thing I could find is to run status('c'); and monitor the File Size in the displayed output. If the file size is increasing, then there is something being done. But I could not know the progress or percentage of work done or get an ETA.
I need some information from my GPSD server running on my NTP master server.
Amount of satellites it is seeing
Which satellites it is using for the positon fix (maybe also SNR)
Which satellites it is seeing since there are a lott of them (is this possible?)
I am going to output this to PHP, so it must be simple
The GPSD source contains the file gpsd.php which can deliver the current position and satellite info ("skyview") either as a finished HTML page or as a JSON string. So you need to make sure a web server with PHP support runs on your master server and you can call http://ntp-server/path/to/gpsd.php to get it. Append ?op=json to the URL to return the JSON result.
You can get just the php file here: https://github.com/yazug/gpsd/raw/master/gpsd.php
Beat Bolli: I think you meant this one: https://github.com/yazug/gpsd/raw/master/gpsd.php.in (they have renamed it)
It suggests to use ?poll; function, but it hangs to me when I try to read the response...