This is not a programming question but an inconvenience in the android-studio editor.
If you have an unwanted tab before all your lines, how can you remove them all at once? Now I have to manually go over 50 lines to remove all the tabs to make my code look clean.
If you want to add multiple tabs at once you just select all your code and press the tab button. So I'm looking for the reverse of that.
If I understood you right, you want to beautify the code itself. Fortunately, you don't have to do that manually - at all.
There's a keybinding for it, which may vary by your OS and which layout you use by default. Go to file -> settings -> Keymap and search for auto-indent. Here's what I get on Windows 10 with the default keymap:
Again, which you have may depend on OS (I'm assuming that mainly applies to Mac though) and your keymap, but you can automatically indent your code as per language standards using Ctrl+Alt+I.
Note that this mainly does indentation. If you chose to golf code and want to ungolf it, this will not work. At least it doesn't for Java.
However: This only works with code files the IDE or plugins support. This won't work for i.e. a .txt file out of the box.
If I misunderstood you and you only want to remove tabs without doing the auto-indent, there's at least two other options.
The first option is using multiple cursors. You can add an additional cursor with shift+alt+a mouse click where you want the cursor, or holding the mouse wheel and moving the cursor with the mouse wheel held down. There might be other methods as well, but those are the two I know of.
Once you have multiple cursors, delete the tabs just like normal. But be careful! Doing so might delete the entire line itself. If it does, you can do 1 tab/n units per indent level to the left, and press delete instead.
There's (AFAIK) no limit to how many cursors you can have at once, but you can theoretically do it with 50 lines at once if you want to. But general advice - don't add more cursors than you can see at once. These do run in parallel and it's easy to lose track if you're not careful, and you might end up deleting stuff you didn't want to delete.
And finally, the regex solution:
Note: Be careful with this. If you use it incorrectly, you might get unwanted results.
If you only want to do this in a limited area, highlight it first. Then CTRL+R and you'll be presented with the regular replace menu. Make sure Regex and In Selection are selected.
A base regex to go off is ^([\s]{2,4}|\t). Explanation just for reference:
^ - At the start of the line
(
\s{4} - Match 4 spaces
|\t - Or a tab character
)
Replace with nothing and click "replace all" (or just use the regular "replace" button if you want to double-check before you do anything). This will replace one occurrence of 4 spaces or a single tab character. If you use indentation that isn't based on 4, change the number.
This is only useable and useful if you've found yourself with incorrect indentation that's the same across all the relevant lines - it will not fix indentation mistakes and/or inconsistencies such as 3-space indentation when you want 4, or random indetation for the same block. Use the first or alternatively second method for that instead.
The . key can be used to repeat the last insert command. However, we might do some navigation that is not part of the insert, but we want it repeated.
Imagine commenting out lines like so:
// line of text
// line of text
line of text
line of text
The insert command is to put the two forward slashes and a space. That can be repeated using the . key. The navigation would be to navigate down one line and then left some number of characters. That part is not captured by the . key command.
How can we achieve this functionality? I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
Press qX, where X is any of the writable registers (typically: pick any lowercase letter).
Do whatever actions you want to record.
Press q again to stop recording.
Press #X (where X is the same register) to play it back (count times, if used with a count).
Press ## to replay the most recently used macro (count times).
I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
If the Vim docs are to be believed, Vi did not support recording (steps 1-3), but did support #. Then you would have to manually yank the characters into the target register with "Xy<motion> or some other register-writing command. That also works under Vim, but I can't recommend it because it is much more error prone.
Another approach would be "block select then edit" approach:
ctrl + v - block select
then go down j or down-arrow
shift + i will put you in insert mode. Make the change here where you want it to be reflected on all the other lines you've selected.
esc twice will show/repeat that change you made on the line one.
If you have a big range of similar lines and want to put // at the beginning of it, you can do something like:
:15,25norm! I//<space>
You can also use visual area (vip selects an entire paragraph)
:'<,'>norm! I//<space>
using a pattern
:g/TODO/norm! I//<space>
Is it possible to mark multiple lines in PhpStorm?
e.g.
LineA
LineB
LineC
lets say I try to mark LineA and LineC to copy paste them to another place, is this possible?
LineA
LineC
Sure .. but it requires a bit of "precision pointing" and using mouse (not sure if it's easily doable with keyboard only).
Basically -- the idea is to use Multiple Carets functionality:
Place caret at the beginning of first line
Now Alt + Click on the beginning of the other line to create new caret there (shortcut depends on OS -- on Linux it might be different shortcut/combo as that shortcut may used by Desktop/Window manager for own stuff)
Now you have 2 carets on the beginning of Line A and Line C
Just use Shift + End to select text to the end of line -- it will be done in both lines.
Now just Copy + Paste it elsewhere (or whatever you wanted to do).
Use Esc to get rid of carets.
Use multiple cursors. The keyboard shortcuts may vary (those described in the documentation do not work for me on Linux).
Explore clicking around the text while various combinations of the Ctrl, Alt and Shift keys are pressed. On macOS also try Cmd. One of them allows you to place multiple carets in the text (f.e. at the beginning of the lines you want to copy).
After you placed all the carets you need use Shift and the arrows to extend the selection. Use Copy and Paste as usual. Use Escape or click anywhere in the text to deselect and go back to the regular, single-caret, status.
I have IdeaVim plugin installed and I'm having trouble editing multiple lines at the same time, but I have seen a few videos on web where people do it properly.
So I select a word using let's say v + e and then I do Alt + j (I'm using Ubuntu) to select multiple occurances in the document, and then if I press c, it edits only the first occurance and then just deletes the rest.
I tried loads of key combinations but cannot get it working. Is this not possible to do in IdeaVim? Do I have to toggle the plugin on and off to achieve this?
Working with multiple carets is not supported by IdeaVim (besides the Visual Block mode, Ctrl+V). Feel free to vote for this feature request VIM-780.
Note that you can achieve even better results for editing variable and function names in your code with the Rename refactoring ("Refactor | Rename..."). It will rename all the correct usages of the variable across multiple files.
Selecting a large amount of text that extends over many screens in an IDE like Eclipse is fairly easy since you can use the mouse, but what is the best way to e.g. select and delete multiscreen blocks of text or write e.g. three large methods out to another file and then delete them for testing purposes in Vim when using it via putty/ssh where you cannot use the mouse?
I can easily yank-to-the-end-of-line or yank-to-the-end-of-code-block but if the text extends over many screens, or has lots of blank lines in it, I feel like my hands are tied in Vim. Any solutions?
And a related question: is there a way to somehow select 40 lines, and then comment them all out (with "#" or "//"), as is common in most IDEs?
Well, first of all, you can set vim to work with the mouse, which would allow you to select text just like you would in Eclipse.
You can also use the Visual selection - v, by default. Once selected, you can yank, cut, etc.
As far as commenting out the block, I usually select it with VISUAL, then do
:'<,'>s/^/# /
Replacing the beginning of each line with a #. (The '< and '> markers are the beginning and and of the visual selection.
Use markers.
Go to the top of the text block you want to delete and enter
ma
anywhere on that line. No need for the colon.
Then go to the end of the block and enter the following:
:'a,.d
Entering ma has set marker a for the character under the cursor.
The command you have entered after moving to the bottom of the text block says "from the line containing the character described by marker a ('a) to the current line (.) delete."
This sort of thing can be used for other things as well.
:'a,.ya b - yank from 'a to current line and put in buffer 'b'
:'a,.ya B - yank from 'a to current line and append to buffer 'b'
:'a,.s/^/#/ - from 'a to current line, substitute '#' for line begin
(i.e. comment out in Perl)
:'s,.s#^#//# - from 'a to current line, substitute '//' for line begin
(i.e. comment out in C++)
N.B. 'a (apostrophe-a) refers to the line containing the character marked by a. ``a(backtick-a) refers to the character marked bya`.
To insert comments select the beginning characters of the lines using CTRL-v (blockwise-visual, not 'v' character wise-visual or 'V' linewise-visual). Then go to insert-mode using 'I', enter your comment-character(s) on the first line (for example '#') and finally escape to normal mode using 'Esc'. Voila!
To remove the comments use blockwise-visual to select the comments and just delete them using 'x'.
Use the visual block command v (or V for whole lines and C-V for rectangular blocks). While in visual block mode, you can use any motion commands including search; I use } frequently to skip to the next blank line. Once the block is marked, you can :w it to a file, delete, yank, or whatever. If you execute a command and the visual block goes away, re-select the same block with gv. See :help visual-change for more.
I think there are language-specific scripts that come with vim that do things like comment out blocks of code in a way that fits your language of choice.
Press V (uppercase V) and then press 40j to select 40 lines and then press d to delete them. Or as #zigdon replied, you can comment them out.
The visual mode is the solution for your main problem. As to commenting out sections of code, there are many plugins for that on vim.org, I am using tComment.vim at the moment.
There is also a neat way to comment out a block without a plugin. Lets say you work in python and # is the comment character. Make a visual block selection of the column you want the hash sign to be in, and type I#ESCAPE. To enter a visual block mode press C-q on windows or C-v on linux.
My block comment technique:
Ctrl+V to start blockwise visual mode.
Make your selection.
With the selection still active, Shift+I. This put you into column insert mode.
Type you comment characters '#' or '//' or whatever.
ESC.
Or you may want to give this script a try...
http://www.vim.org/scripts/script.php?script_id=23
For commenting out lines, I would suggest one of these plugins:
EnhancedCommentify
NERD Commenter
I find myself using NERD more these days, but I've used EnhancedCommentify for years.
If you want to perform an action on a range of lines, and you know the line numbers, you can put the range on the command line. For instance, to delete lines 20 through 200 you can do:
:20,200d
To move lines 20 through 200 to where line 300 is you can use:
:20,200m300
And so on.
Use Shift+V to go in visual mode, then you can select lines and delete / change them.
My usual method for commenting out 40 lines would be to put the cursor on the first line and enter the command:
:.,+40s/^/# /
(For here thru 40 lines forward, substitute start-of-line with hash, space)
Seems a bit longer than some other methods suggested, but I like to do things with the keyboard instead of the mouse.
First answer is currently not quite right?
To comment out selection press ':' and type command
:'<,'>s/^/# /g
('<, '> - will be there automatically)
You should be aware of the normal mode command [count]CTRL-D.
It optionally changes the 'scroll' option from 10 to [count], and then scrolls down that many lines. Pressing CTRL-D again will scroll down that same lines again.
So try entering
V "visual line selection mode
30 "optionally set scroll value to 30
CTRL-D "jump down a screen, repeated as necessary
y " yank your selection
CTRL-U works the same way but scrolls up.
v enters visual block mode, where you can select as if with shift in most common editors, later you can do anything you can normally do with normal commands (substitution :'<,'>s/^/#/ to prepend with a comment, for instance) where '<,'> means the selected visual block instead of all the text.
marks would be the simplest mb where u want to begin and me where u want to end once this is done you can do pretty much anything you want
:'b,'ed
deletes from marker b to marker e
commenting out 40 lines you can do in the visual mode
V40j:s/^/#/
will comment out 40 lines from where u start the sequence