I am trying to add a conditional format formula for cell A1. I would like to change the color to green when the offset value (2,20)=True. I can't use =$U$3=TRUE because the range will change as I copy and paste this to other tabs.
Would it be possible to input into the formula something like this?
=ActiveCell.Offset(2,20)=True
You can use
=OFFSET(A1,2,20)
No need for the = TRUE part.
Make sure the cell reference isn't absolute and nor is the range it is applied to.
Applied:
Related
I'm trying to set conditional formatting in a specific group of cells J9:N12 with a locked cell I9 (110). In Cells J9:N12 I need the conditional formatting to set 1,2,7,8,13,14 as Black Fill w/ White Text, 3,4,9,10,15,16 as Red Fill w/ Black Text, 5,6,11,12,17,18 as Blue Fill w/ White Text. Then if I Change (I9) to 277 the Fills would change to reflect Brown/Orange/Yellow in place of the Black/Red/Blue.
Yes, I can Conditional Format the cells I need based on the information set in cell (I9) 110 or 277.
The series of numbers I need to format is greater than 120. I cannot set Conditional Formatting for each specific number needed. Minimallistically I need to be able to set Conditional Formatting to around 150-160 numbers.
I don't know if I need to utilize VBA or if Conditional Formatting is the way to go.
You could use conditional formatting for this. I'd be tempted to put the number series in an array and test for a find in the array using MATCH. This way, you'd only need as many conditional formatting rules as there are number series.
I'm not certain, but I believe you can't write an array directly into a conditional format rule, but you could refer to it from something like a range name. In any event, a range name would be easier to manage if you needed to change any of the number series.
For example, in the black/brown case, you could create a range name (Formulas->Define Name), called black-brown, and in the Refers To window, have the formula:
={1,2,7,8,13,14}
Then your conditional formatting rule would be something like:
=AND($I$9=110,NOT(ISNA(MATCH(B2,black_brown,0))))
Note my cell to be tested is in B2 - change that to whatever you need.
You'd just add rules for each of your number series cases, as shown below:
So here's my problem. I have a table of the numbers 1 through 100, and another cell (we'll call it A1) that will contain a number between 1 and 100. I would like to use conditional formatting to fill these cells, so if A1 contains the number 20, all of the cells from 1 to 20 will be filled. I am trying to use conditional formatting in order to achieve this, and would like to use the format painter if possible to make this easier (instead of making a new rule each time). I feel that the best way to accomplish this is to reference the current cell, i.e. format if CURRENT_CELL <= A1. I am struggling to reference the current cell.
You can use the Less Then and the Equal conditional formatting like you can see below.
There is no need for a custom rules.
I have a sheet that looks like this:
The coloured cells need to be a specific colour based on their value. I am currently using conditional formatting to achieve this, but I am only able to get it to apply to a single column instead of the entire range A:G. For example, here’s my formula for column A for values that should be coloured light blue:
=OR($A1="CA515",$A1="CA525")
And applies to:
=$A:$A
Using the above formula, if any of the cells in column A contain the value CA515 or CA525, the cell alone is coloured light blue. Is there any way to use a single conditional formatting formula to make it possible that if any of the cells in the range A:G contain the value CA515 or CA525 that only that cell alone is coloured light blue? Or do I have to apply the formula to every column individually, or possibly even resort to VBA?
Thank you in advance!
You can avoid using VBA here*... Remove the dollar signs in your conditional statement, it should be
=OR(A1="CA515", A1="CA525")
The dollar signs specify whether the reference is relative or absolute. To visualise how this works, try typing these formulas into a cell and dragging the corner of the cell down to autofill:
=A1 'Autofilling this down will give =A2, =A3, ...
=$A1 'Autofilling this down will give =$A1, =$A1, ...
So by removing $, your format condition should be spread across the range. To set the range, change "applies to" to $A:$G.
Note: many conditional formats over a large range like this could severely impact the speed of your document. Consider at least limiting the number of different formats, or the number of rows it's checking.
*Although the above method does avoid VBA, it might be quicker to write your own formatting routine in VBA, since it wouldn't have to get checked so frequently and it would be unaffected by moving around of ranges which messes with conditional formats.
I'm currently working in excel, and I'm trying to figure out a way to find if multiple cells contain the string value of another cell, and if it does highlight the cell where the row and column meet up. I created an example of what I want, only it will be on a much larger scale.
I've tried using: =ISNUMBER(SEARCH(substring,text)) but I'm not quite sure how to use it the way I want to.
Any help will be appreciated!
Your approach is correct, we can use the fact that conditional formatting is applied like dragging a formula, adapting relative references.
Create a conditional formatting formula rule:
=ISNUMBER(SEARCH(B$1,$A2))
Applied to B2:D7
Your formula will work nicely; what you'll want to do is put that formula into all the cells you want to highlight, so you get FALSE and TRUE in every cell.
You'll then use two Conditional Formatting rules. The first will look for Cell Value = TRUE, and will set cell background and font colour to yellow. The second will look for Cell Value = FALSE, and will set cell background to No Colour and Font to White.
This will reproduce the result you're looking for.
Edited to add:
It is possible to do this using just Conditional Formatting too, but it's a little more fiddly. If you want to try it, you can do this:
Highlight your range, and take note of which cell is Active - that's the cell within your highlighted range that is still white. It's also the one whose address is shown in the Name box in the upper left. For the sake of this answer, we'll assume that's B2
Create a new Conditional Formatting rule. Choose "Use a formula to determine which cells to format".
Use the formula =ISNUMBER(SEARCH(B$1,$A2). Set the format to colour just the cell background.
Note where the $ appears in the formula above - you want to leave the row number anchored in the first part, and the column letter anchored in the second part.
This takes advantage of the fact that Conditional Formatting is able to use absolute, relative, and mixed references to find which cells to format. It's also a tidier solution, but it can be harder to maintain if the sheet is ever repurposed or modified.
I use conditional formatting to format a cell depending on the values of another cell. This is the rule:
Cell Value not between =$BV$10*0,5 and =$BV$10*0,5
This rule is saved on Cell Y10
(Explanation: If the Value in Y10 is inbetween 0,5...1,5 * BV10 apply the formatting)
I want to use this rule on many different Cells but the formula should adjust automaticly, just like in a "normal" formula.
When I copy the format using the Format Painter the formula is copied without any changes. But I need the row to be changed. For example, when copying to Y11 the formula should be changed to :
=$BV$11*0,5
Is there any way to achieve this or to change $BV$10 into $[this column+83]$[this row] or something like that?
Yes. $ is used to lock the cell reference.
So to get what you need just change your formula to this unlocking the rows:
=$BV10*0,5 and =$BV10*1 ~~> I change the limits to actually test the formula
So if you want your column to move as well, then remove the other $ sign.
Also, you can explicitly apply this formatting to other cells by supplying the range in Applies To argument like below:
Take note that you can actually put the formatting in any cell.
But the effect will always be on the Range you explicitly define in Applies to.
I discourage using the Copy Paste Format as this sometimes overlaps formattings you've done.
To apply the formatting to a group of different range, just separate the ranges with a , comma like what you see below:
So the formatting will then be applied to $Z$10:$Z$20 as well.
It is the same as $Y$10:$Z$20, but I just want to point out that it can be used to none contingous range.
And since your column is locked with your formatting, it will still be references to $BV(x) where x is the corresponding row in Y and Z.