As the title says, I formatted my linux partition where I used as web development environment. Mainly I used MongoDB and NodeJS and both of them are installed correctly. But when I try to execute my main.js I get an error log. It must be something extremely silly that I'm not reminded of. Any help is appreciated. Error log:
SyntaxError: Invalid or unexpected token
at new Script (vm.js:74:7)
at createScript (vm.js:246:10)
at Object.runInThisContext (vm.js:298:10)
at Module._compile (internal/modules/cjs/loader.js:657:28)
at Object.Module._extensions..js (internal/modules/cjs/loader.js:700:10)
at Module.load (internal/modules/cjs/loader.js:599:32)
at tryModuleLoad (internal/modules/cjs/loader.js:538:12)
at Function.Module._load (internal/modules/cjs/loader.js:530:3)
at Module.require (internal/modules/cjs/loader.js:637:17)
at require (internal/modules/cjs/helpers.js:20:18)
Note that helpers.js is a node internal module.
Please download nodeJS command prompt for Linux or download by command
pacman -S nodejs npm
For More help : Visit the link
Node JS Installation Guide
Related
I install node.js with pm2, all install fine but when i try to do pm2 monit give me this error.
$ pm2 monit
/home/node/.nvm/versions/node/v8.11.3/lib/node_modules/pm2/node_modules/fast-printf/dist/src/tokenize.js:4
const TokenRule = /(?:%(?<flag>([+0-]|-\+))?(?<width>\d+)?(?<position>\d+\$)?(?<precision>\.\d+)?(?<conversion>[%BCESb-iosux]))|(\\%)/g;
^
SyntaxError: Invalid regular expression: /(?:%(?<flag>([+0-]|-\+))?(?<width>\d+)?(?<position>\d+\$)?(?<precision>\.\d+)?(?<conversion>[%BCESb-iosux]))|(\\%)/: Invalid group
at Object.<anonymous> (/home/node/.nvm/versions/node/v8.11.3/lib/node_modules/pm2/node_modules/fast-printf/dist/src/tokenize.js:4:19)
at Module._compile (module.js:652:30)
at Object.Module._extensions..js (module.js:663:10)
at Module.load (module.js:565:32)
at tryModuleLoad (module.js:505:12)
at Function.Module._load (module.js:497:3)
at Module.require (module.js:596:17)
at require (internal/module.js:11:18)
at Object.<anonymous> (/home/node/.nvm/versions/node/v8.11.3/lib/node_modules/pm2/node_modules/fast-printf/dist/src/createPrintf.js:5:20)
at Module._compile (module.js:652:30)
I tried servers nodejs version and always give me this error.
If you paste your regular expression into a regex sandbox, like this one:
https://regex101.com/r/GkwWH2/1
You'll see that it doesn't show any syntax errors.
That would make me suspect that you're running a back-level version of Node JS. And in fact, if you look at your stack trace, you see that you are running Node 8.11.3
at Object.<anonymous> (/home/node/.nvm/versions/node/v8.11.3/lib/node_modules/pm2/node_modules/fas
That regular expression is using features (such as named capture groups) that did not come into Node.js until Node v10.*.
I suggest you update to the latest LTS version of Node, version 14.*: from your stack trace it would appear that you're using NVM, so it should be a simple matter of
sudo nvm install lts/fermium
should do it.
I am trying to run my node script with node . on Ubuntu 18.04
It worked successfully on previous machine. This is a new setup and running into this error.
/var/www/html/node_bot/node_modules/discord.js/src/structures/interfaces/Collector.js:203
async *[Symbol.asyncIterator]() {
^
SyntaxError: Unexpected token *
at createScript (vm.js:80:10)
at Object.runInThisContext (vm.js:139:10)
at Module._compile (module.js:616:28)
at Object.Module._extensions..js (module.js:663:10)
at Module.load (module.js:565:32)
at tryModuleLoad (module.js:505:12)
at Function.Module._load (module.js:497:3)
at Module.require (module.js:596:17)
at require (internal/module.js:11:18)
at Object.<anonymous> (/var/www/html/node_bot/node_modules/discord.js/src/structures/MessageCollector.js:3:19)
My node version is v8.10.0 on all accounts including root.
I have tried chowning the files to root and running from root, same error.
Am I missing a package or something? Thanks
Use a newer node version.
From library documentation
https://github.com/discordjs/discord.js
Installation
Node.js 10.2.0 or newer is required.
Updated to node v10.18.1 and it works.
I am trying to get a particular npm package to run on Ubuntu 16.04. I am currently running the most up-to-date versions of nodejs and npm, as well as the package (turndown).
Here is the error that I get:
root#ubuntu-s-1vcpu-1gb-nyc1-01:/usr/server# nodejs index.js
/usr/server/node_modules/jsdom/lib/api.js:10
const { URL } = require("whatwg-url");
^
SyntaxError: Unexpected token {
at exports.runInThisContext (vm.js:53:16)
at Module._compile (module.js:374:25)
at Object.Module._extensions..js (module.js:417:10)
at Module.load (module.js:344:32)
at Function.Module._load (module.js:301:12)
at Module.require (module.js:354:17)
at require (internal/module.js:12:17)
at createHTMLParser (/usr/server/node_modules/turndown/lib/turndown.cjs.js:529:17)
at Object.<anonymous> (/usr/server/node_modules/turndown/lib/turndown.cjs.js:537:60)
at Module._compile (module.js:410:26)
The error states it occurs within the "turndown" package and is due to the language in the constructor. What is confusing to me is that this runs on Fedora 27 without error.
What could be causing the difference in behavior?
The answer to this question was to update my version of NodeJS. I ran into another error now, but it is package related.
it has been one week now that i was trying to install meanjs stack and had no success.
Everytime I follow some tutorial and get errors. Now I end up with many issues, too much nodejs version, i dont know which one should be with what and why do karma not working ...etc
is there anyway to remove everything and install meanjs correctly and get it running successfully
+ WARNING: It is strongly recommended that you change sessionSecret config while running in production!
Please add `sessionSecret: process.env.SESSION_SECRET || 'super amazing secret'` to
`config/env/production.js` or `config/env/local.js`
/opt/mean/node_modules/connect-mongo/src/index.js:3
const Promise = require('bluebird');
^^^^^
error: uncaughtException: Use of const in strict mode. date=Mon Jul 18 2016 19:15:59 GMT+0400 (GST), pid=29602, uid=1000, gid=1000, cwd=/opt/mean, execPath=/usr/local/bin/node, version=v0.10.33, argv=[node, /opt/mean/server], rss=47960064, heapTotal=35267072, heapUsed=18951416, loadavg=[0.5966796875, 0.453125, 0.66748046875], uptime=4058.491096953
SyntaxError: Use of const in strict mode.
at Module._compile (module.js:439:25)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.require (module.js:364:17)
at require (module.js:380:17)
at Object. (/opt/mean/node_modules/connect-mongo/index.js:1:80)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.require (module.js:364:17)
at require (module.js:380:17)
at Object. (/opt/mean/config/lib/express.js:12:16)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
below is my system config
Linux Mint 17.2 64-bit
NodeJS v0.10.33
npm 1.4.28
bower 1.7.9
mongodb v3.0.12
Can anyone please help me, I want to get started.
I haven't dug into it, but I'm guessing the version of node you have doesn't support the 'const' keyword. 0.10.x is a (fairly) old version of node; have you considered upgrading to one of the versions that has ES 6 native support?
I am trying to deploy a node app on Linode (Ubuntu 12.04) while following this guide from Node Knockout: http://blog.nodeknockout.com/post/9300619913/countdown-to-ko-14-deploying-your-node-js-app-to
I have no problems running the server as root, but when trying to start the server as the "deploy" user using sudo start node, I get this error:
/home/deploy/app/source/node_modules/bcrypt/node_modules/bindings/bindings.js:79
throw e
^
Error: Module version mismatch. Expected 11, got 1.
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.require (module.js:364:17)
at require (module.js:380:17)
at bindings (/home/deploy/app/source/node_modules/bcrypt/node_modules/bindings/$
at Object.<anonymous> (/home/deploy/app/source/node_modules/bcrypt/bcrypt.js:1:$
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
I have tried recompiling bcrypt using make clean then make since I thought my module version was incompatible with my version of node (v0.8.18), but that does not seem to be the case since I can start the server as root with no problem. I feel as though the problem lies in how I set up the deploy user, but I am not sure how to proceed.