I am completely new to Dialogflow and nodejs. I need to get the entity value from the argument to the function (agent) and apply if the condition on that. How can I achieve this?
I am trying below but every time I get else condition become true.
I have created an entity named about_member.
function about_member_handeller(agent)
{
if(agent.about_member=="Tarun")
{
agent.add('Yes Tarun');
}
else
{
agent.add("No tarun");
}
}
Please help.
In such cases, you may use console.log to help unleash your black box, like below:
function about_member_handeller(agent) {
console.log(JSON.stringify(agent, null, 2));
if(agent.about_member=="Tarun") {
agent.add('Yes Tarun');
}
else {
agent.add("No tarun");
}
}
JSON.stringfy() will serialize your json object into string and console.log will print the same on the stdOut. So once you run your code this will print the object structure for agent and after which you will know on how to access about_member. Because in the above code it's obvious that you are expecting about_member to be a string, but this code will let you know on the actual data in it and how to compare it.
To get the parameter you can use the following;
const valueOfParam = agent.parameters["parameterName"];
Related
When I run this code I get push is not a function. I have gone over the code so many times and can't figure out where I went wrong. i have also read many of post and I still can't figure it out. I am new to programming and could use the help.
const fs= require('fs')
const getNotes = function() {
return 'This just returns get notes'
enter code here
};
const addNote = function (title, body) {
const notes = loadNotes()
notes.push({
title: title,
boby: body
})
saveNotes(notes)
};
const saveNotes = function (notes) {
const dataJSON = JSON.stringify(notes)
fs.writeFileSync('notes.json',dataJSON)
}
// Code below loads the notes. Above, addNote adds the note.
const loadNotes = function () {
try {
const dataBuffer = fs.readFileSync('notes.json')
const dataJSON= dataBuffer.toString()
return JSON.parse(dataJSON)
} catch (error) {
return('Note such file')
}
}
module.exports ={
getNotes: getNotes,
addNote: addNote
}
So, you have this:
const notes = loadNotes()
notes.push({
title: title,
boby: body
});
If you're getting an error that notes.push is not a function, then that is because loadNotes() is not return an array. That could be for a couple reasons:
JSON.parse(dataJson) successfully parses your json, but its top level object is not an array.
JSON.parse(dataJson) throws and you end up returning a string instead of an array.
You can fairly easily diagnose this by adding a console.log() statement like this:
const notes = loadNotes();
console.log(notes); // see what this shows
notes.push({
title: title,
boby: body
});
FYI, returning a string fromloadNotes()as an error really doesn't make much sense unless you're going to check for a string after calling that function. IMO, it would make more sense to either return null for an error or just let it throw. Both would be simpler and easier to check after calling loadNotes().
And, in either case, you must check for an error return value after calling loadNotes() unless you want loadNotes() to throw upon error like it is.
After taking some information from the user I want to return some text using those data. Like If/else statement. If this matches with this then I will return this. But I don't know where I can or how to implement this. Can anyone please help?
You want to look into writing that code using fulfillment, which is typically implemented using a webhook or Dialogflow's built-in editor. You might, for example, do something like this:
function languageHandler(agent) {
const language = agent.parameters.language;
const programmingLanguage = agent.parameters.ProgrammingLanguages;
if (language) {
agent.add("Wow! I didn't know you knew ${language}");
}
else if (programmingLanguage) {
agent.add("${programmingLanguage} is cool");
} else {
agent.add("What language do you know?")
}
}
Does the BotBuilder Node SDK actively strip out anything that is stored the dialogData object?
For example, I have created a simple loop and I am storing a regex in session.dialogData.questions. When I console log this after storing it, I can see that my regex is stored as expected:
{
validation: /^[0-9]{19}$/,
}
However, when I try and log the same session.dialogData.questions object in the next step of my waterfall, then the regex seems to have been converted into an empty object:
{
validation: {}
}
I presume this a deliberate attempt to prevent XSS and other types of exploitation?
The code for this example can be found below:
const builder = require('botbuilder')
const lib = new builder.Library('FormBuilder')
lib.dialog('/', [
(session, args) => {
session.dialogData.questions = {
validation: /^[0-9]{19}$/
}
console.log(session.dialogData.questions)
builder.Prompts.confirm(session, 'Would you like to proceed?')
},
(session, results) => {
console.log(session.dialogData.questions)
}
])
module.exports.createLibrary = () => {
return lib.clone()
}
Regarding your initial question, no the SDK doesn't actively strip anything out of the dialogData object. Anything that is, except for regexp...
I'm not sure why this is, but for the time being I recommend storing your pattern as a string, '^[0-9]{19}$', and then constructing a new regexp via new RegExp(session.dialogData.questions.validation) when needed.
I tried storing a method to construct a new RegExp using this.questions.validation, but likewise this was also stripped out.
Edit:
Per Ezequiel's comment, this isn't a Bot Framework issue in the end. It is not possible to store non-serializable data inside JSON.
I copied the code from kraken. I don't understand why there is a space between get and app(). Can someone please explain what's going on here?
var kraken = {
get app() {
return this._app;
},
use: function (route, delegate) {
//.....
}
}
No, in javascript a function cannot contain spaces. The code you are showing is using the get keyword to bind a property to a object.
get
Binds an object property to a function that will be called when that property is looked up.
Have a look to getters and setters in javascript.
It's a getter.
Check out this link.
The function is get and it's exposing a property called app.
I use the following code to load and save a value in chrome.storage:
$(document).ready(function()
{
$( "#filterPlus" ).click(function()
{
SaveSwitch("plus1","#filterPlus","plus1");
});
}
function SaveSwitch(propertyName, imageId, imageSrc)
{
chrome.storage.sync.get(propertyName, function (result) {
var oldValue = result.propertyName;
alert('GET:old='+oldValue);
if (oldValue==null)
{
oldValue=false;
}
var newValue=!oldValue;
chrome.storage.sync.set({propertyName: newValue}, function()
{
alert('SET:'+newValue);
});
});
}
When I run through this method, the first alert shows:GET:old=undefined, the second alert shows:SET:true just like expected. But when calling that method again with the same parameters the first alert AGAIN shows GET:old=undefined instead of GET:old=true which I expected.
It is the same behaviour when I use storage.local instead of storage.sync
"storage" is in the manifest's permissions. The JS is called from the options-page of my extension-
You're doing .get("plus1", ...) and then later doing .set({"propertyName": newValue}, ...). You are storing under the key "propertyName" but fetching the key "plus1", which has never been set.
Perhaps your misunderstanding is that keys in object literals are themselves literal (even when not quoted), rather than variable identifiers. In that case, you might benefit form reading How to use chrome.storage in a chrome extension using a variable's value as the key name?.