I have a simple user registration form which needs to check if the email address already exists - it initially works when I hit the Submit button eg if I enter an existing mail address I get the error, but if I then modify the address to a non-existent one it takes one or two more submits before passing validation. So it seems there is some caching going on somewhere.
I have an isExistingUser function in an SSJS library which simply looks up to the $Users view in the Directory and returns a boolean. Then the XPage source is as follows:
<xp:validateExpression>
<xp:this.message><![CDATA[This user already exists!]]></xp:this.message>
<xp:this.expression><![CDATA[#{javascript:var em = getComponent("inputEM").getValue();return isExistingUser(em)}]]>
</xp:this.expression>
</xp:validateExpression>
How do I force this to work correctly on every submit ie clear any previous values from memory/cache? Many thanks
Use getComponent(“inputEM”).getSubmittedValue() - or even better: use the data source to get the contents of inputEM such as document.getValue(“inputEM”)
Related
Im making an Xpages application which needs to have server-side validation.
In my form, when a field is cleared and the form submitted - if there is another field which causes the validation to fail - it will be repopulated with the last successfully saved value in the document.
This is not what should happen. The field should stay blank until the page is either refreshed, or the user enters another value.
Does anyone have any idea about what is causing this to happen?
Thanks,
Paul
This depends on your execId and refreshId.
For what happens during partial refresh, read these blog posts, particularly part three http://www.intec.co.uk/tag/partial-refresh/.
If validation (or conversion) fails server-side, the server-side map of the XPage is not updated because the data is not deemed complete enough for server-side processing.
So the partial refresh skips to Render Response, which posts back what HTML should be displayed to the page. That includes values in fields - you're replacing HTML, so it has to.
If you're save button is refreshing the form area, you'll be replacing the HTML there, so overwriting the values entered by the user with the last valid values.
The recommended approach will depend on your page architecture and what you're saving. One is to move validation to the save() function, by which time the values will have been updated in the DominoDocument (the front-end wrapper for the Document on the server). Another is to only refresh the validation area and, if validation was successful, call context.reloadPage() or context.redirectToPage() to effectively skip the partial refresh.
Thanks for the help. As far as I can tell, it was simply due to the way the default converter included with xpages handles the object and/or string. Writing a java custom converter sorted everything out.
Basically what I want to do is create a form whilst within another form and pass values from the earlier form to the second. Complicated I know but here is what I got.
#Do(#Command([Compose];"LPK"); #SetField("PR_Make"; PR_Make))
The fields in both forms have the same name and this code is called when first document is attempted to be saved.
I think instead of editing the field on the second form it just saves a field as itself instead. Any help appreciated.
The best and common way is to enable form property "Formulas inherit values from selected document" in second form "LPK".
Add a default value formula to second form's fields you want to inherit and put just the name of field itself in. For your example default value formula it would be
PR_Make
Make sure you save document first and then create the new document.
Knut Hermann's answwer is the 'standard' way of achieving such things but there are other methods- eg you can use environment variables ..
Something like:
#Environment("PR_Make") := PR_Make;
#Command([Compose];"LPK");
Then set the default value for PR_Make in your new form as ..
#Environment("PR_Make")
FYI Environment variables are written to the user's Notes.ini file and so remain even after Notes has been closed and re-opened. #Environemt doens't work too well with Web applications as it uses the server's notes.ini.
An alternative would be to use profile documents:
#SetProfileField( "PRDefaults"; "PR_Make" ; PR_Make;#Username);
#Command([Compose];"LPK");
.. in the default field for PR_Make on new form :
#GetProfileField( "PRDefaults"; "PR_Make"; #Username);
Profile documents are stored as a kind of hidden document in the Notes database and persist with the database. The last parameter sets a further subdivision by username so each user gets their own profile doc - a bit like a personal profile for "PRDefaults". You can miss this last parameter #Username out, to have one profile doc per database but there's a risk of two people trying to use it at the same time and clashing.
Profile docs also work with web applications.
I'm new to the Zend Framework and I have a problem to create an edit form with the Zend_Form.
My problem is that I need to store the entry ID during editing, I've seen some examples that are using a hidden form field, but a hidden field can be manipulated by a user.
So: how can I set a form field which gets populated by $form->populate($data); and is available after submiting the request but is not editabel/visible to the user in any way?
Thanks for any help!
I'm not sure if there's really a point in trying to hide the value.
Consider the following:
To display the correct editor form, you need the ID of the object that is to be edited.
Before allowing the user to edit a certain ID, you would check if the user can edit it or not.
Thus, if you put the ID in the form, it shouldn't really matter:
When you POST the edit form, you should again check that the user can still edit the ID.
If the user changes the hidden ID, it doesn't really matter. They could still go and edit the other ID by finding it on the site. (This is assuming your check didn't tell you the user does not have access)
what kind of data you wanna hide?
data should be in post or get.if you dont put your data in your form,then you will have to use GET which is less secure than POST.
If you have some data and you dont want the user to see those data,then you should not put those data in a form.you can store and retrieve hidden data using forms submitted values.lets suppose your hidden field is users password.you dont need to send password back to the client when client is editing the form.you can manipulate password in your controller according to the user`s submitted first name and last name.
If you still insist, you may wanna try encrypting data using ZF and echo ing your value and setting encrypted data into a hidden form element.
Zend_Form generates an HTML form element with the form elements you specify. So its element capabilities are narrowed to a simple HTML form.
The hidden form element is used to pass those data that the user is not supposed to enter by hand. But as you yourself said it, there is no guaranty it could not be tampered. so no security is provided by using a hidden form value.
Most of times you'd better use server side values (like stored in sessions) to reference to values that are to be protected from user.
I suggest you keep the ID in a session value, and then you could use the session key in the hidden form field. this way the user can not change the target ID. However you are not able to use the $form->populate($values) on this in one step. you would have to set the target value with other steps:
fetch data from the session
set the form element value with the fetched data
I am new to Drupal and trying to get hand on it.
I am not able to find how to have the following functionality on my site. If anyone can help me out, it would be great for me.
I need to have a form that will take 2 fields one of which is supposed to be the login id(how to retrive login id?). I need to store this and display in tabular form also on a new page. Lastly I want to provide an edit form for this functionality using the same form but its use will be like whenever a person adds value in this form, it checks in Table1, if entry is not present it adds in table, else it updates the table.
Apart from this I need to store all the updations in a seperate table or something like that, so that I am able to see the history of all the changes
Eg:
ADD Form:
Fields:
- LoginID
- Phone number
Show Table Page(Tabular with the stored information)
Edit Form(same as above form):
Fields:
- LoginID
- Phone number
Now If I add my phone number to this it will get stored. Later when I try to modify my number it should update in initial table but also store the history of old and new entry in a separate table so that I can perform varies options on it.
I also dont know how to add/enable form fields in drupal. :(
Thanks
I'm not entirely sure what you're asking, but I think the Computed Field module might be helpful. The module allows you to define custom hooks that run when a node is saved.
If you're not creating nodes and are using something like the Webform module, you should be able to write a module to process the data.
I am working on a new web app in lotus/domino. I am newer to lotus/domino programming, so forgive me for not knowing something simple.
What I am trying to do is display a table of information, with one of the columns containing a link. The link is formatted like [http://server/app.nsf/form?openform&ideaNum=1&var2=foo2]
How can I retrieve the information from the url, to get information from a view or a document?
So far I have tried to access the query string in the webQueryOpen event, but lotus runs the agent before the DOM writes to the browser, the query_string isn't available.
I am not sure how else to get information from one form to another in lotus.
Thanks for the help.
-Kris
If you're passing multiple params in the query_string, you can get Domino to do a bit more of the work for you. There's an Function command - UrlQueryString - that can format the params into a list, delimiting at the "&".
E.g. server/app.nsf/form?openform&ideaNum=1&var2=foo2
becomes a list:
openform
ideaNum=1
var2=foo2
To use it, on the destination form create a multi-value text field called something like "QryStringList".
Set it to be computed when composed, and set it's value to #UrlQueryString.
In your WebQueryOpen agent, you can access the params as doc.QryStringList(0), docQryStringList(1) and so on, if you're using Lotusscript.
I'm fairly sure I put this together using info from the IBM/ldd forum, but the exact source is lost in the mists of time and memory, so apologies if I've copied someone's post.
Just as a follow up, I found that you are able to specify an on form variable named the same as QUERY_STRING. The variable is actually a reserved term for Lotus, so Lotus pre-fetches the variable before running the information out the browser.
Due to the pre-fetching, you are able to access the url information during the webQueryOpen event.
I hope this helps someone else looking for the same type of functionality.
-Kris