I'm trying to install this software on my computer. http://remaddersoft.wixsite.com/remadder/download
It says:
"In order to be able to use ReMaDDer software, you must be able to establish connection with ReMaDDer server (matalab.hopto.org, port 5432) which is used for back-end fuzzy match processing. Contact your administrator to configure firewall to pass connections on matalab.hopto.org, port 5432."
How do I let the firewall connect to that software on windows 10?
Following below steps you can open the specific port on windows 10 -
Open firewall ports in Windows 10
You can manually permit a program to access the internet by opening a firewall port. You will need to know what port it uses and the protocol to make this work.
Navigate to Control Panel, System and Security and Windows Firewall.
Select Advanced settings and highlight Inbound Rules in the left pane.
Right click Inbound Rules and do the same for outbound rules and select New Rule.
Add the port you need to open and click Next.
Add the protocol (TCP or UDP) and the port number into the next window and click Next.
Select Allow the connection in the next window and hit Next.
Select the network type as you see fit and click Next.
Name the rule something meaningful and click Finish.
Related
My System is configured to have the Windows firewall which blocks the outbound connection and allow connection only through fiddler. In this scenario, when I am trying to send an Https GET request from a node js express server using https node module, it is failing. But when I try the same request from the browser it is successful. What might be the issue because of which it is failing?
And when I add a TCP port rule in windows firewall to allow 80 and 443 rule, the node js request also succeeds.
We need to add a rule in windows firewall outbound rules to allow the application to send a request.
Steps to add the rule :
Launch “Windows Defender Firewall”
Go to “Advanced Settings”
Select “Outbound Rules” and select “New Rule”
Click “Next” and click on “browse” and select the application. In this case the “node” from nodejs folder.
Click “Next” to go to action page.
Choose “Allow the connection” radio button.
Click “Next”
Click “Next” again
Specify some name in the “Name” field and click Finish.
I run my node.js app on Amazon EC2 (Ubuntu 14.04)
On localhost, it works, but application not available on the internet by this address http://ec2-35-160-4-84.us-west-2.compute.amazonaws.com:3443/ where 3443 is my port.
How can I fix it?
Sounds like you need to go to your Security groups on the server, and update the inbound rules to allow port 3443. I assume this would be a TCP connection so you need to update the Custom TCP put in the port and then choose which IP or if all you want to allow into the system.
To get to Security Groups .. go to your EC2 instance, then look on the left side where the menu is and you will see Security Groups listed. Click there, and make sure you are updating the Security Groups INBOUND rules for the right server.
Hope that works.
I know it can be done for each of the site hosted but Can IIS's default port be set to a different one?
From the IIS management console, select Default Web Site. On the right-hand side, click the Edit Bindings link and in the subsequent dialog, change the default port binding as desired.
I found a different solution. My router was allowing traffic in correctly but Windows Firewall was not allowing traffic in on Port 80. I had to allow it by enabling the rule.
I am using VS2012 with IIS Express and can not seem to browse my web sites using my IP Address. Is there some way to do that? It used to work fine with earlier versions of VS.
For example, this address works fine:
http://localhost:64651/
But, this address does not work.
http://192.168.252.165:64651/
I am sure of the IP Address, since I just got it using ipconfig.
Go to your IISExpress>Config folder, locate applicationhost.config. Change <bindings> as below:
<bindings>
<binding protocol="http" bindingInformation="*:1407:YOUR_IP_ADDRESS" />
</bindings>
Before you do this , you will have to register this IP address using netsh command as below:
Port forwarding in Windows 7
If you’re running Windows 7, pretty much all incoming connections are locked down, so you need to specifically allow incoming connections to your application. First, start an administrative command prompt. Second, run these commands, replacing 192.168.1.11:1234 with whatever IP and port you are using:
> netsh http add urlacl url=http://192.168.1.11:1234/ user=everyone
This just tells http.sys that it’s ok to talk to this url.
IMPORTANT: The user=everyone parameter must be specified according to the system language. So if your windows language is spanish the parameter must be user=todos.
> netsh advfirewall firewall add rule name="IISExpressWeb" dir=in protocol=tcp localport=1234 profile=private remoteip=localsubnet action=allow
This adds a rule in the Windows Firewall, allowing incoming connections to port 58938 for computers on your local subnet.More information at this link.
Port forwarding Mac OS X
Step 1: View Current Firewall Rules
sudo ipfw show
Step 2: Add Port Forwarding Rule (80 to 8080)
The default port that Tomcat runs on is 8080, so here we show the command to do port fowarding from port 80 to 8080 (Tomcat’s default port). Obviously, this works for other ports as well, and you’d just have to adjust the command accordingly.
sudo ipfw add 100 fwd 127.0.0.1,8080 tcp from any to any 80 in
This is a temporary change, and it will revert once you reboot. If you want to make it permanent, you can create a lauch deamon for it.
Optional Remove Rule
If you want to remove your firewall rules run:
sudo ipfw flush
Port Forwarding Using PFCTL (aka PF) on Mac OS X
The setup for pfctl is similar to ipfw. Github user kujon has created a nice guide to show how to set up port forwarding from port 80 to another port using pfctl.
Note: Be sure to change the bindings of your project only by locating its name. You can even keep the localhost binding and add a new one , this way you can access same webpage using both the given IP address and your old localhost binding.
You can use Conveyor by Keyoti
Step 1:
Download the Visual Studio Extension by searching for 'Conveyor' in the Tools->Extensions and Updates dialog.
Step 2:
Conveyor is automatically enabled for web application projects, run (debug) a project and note the Remote URL, that is the URL you will use from your device or other computer. Please see troubleshooting below if you don't see the Conveyor window.
Step 3:
Add an inbound firewall rule allowing access to the TCP port given in the Remote URL.
1. Open Windows 'Start' and type WF.msc.
2. Click 'Inbound Rules' on the left.
3. Click 'New Rules' on the right.
4. Choose 'Port' in the new dialog, then 'Next'.
5. Select TCP, and enter the port from the Remote URL next to 'Specific local ports' (probably 45455), then 'Next'.
6. Next, and next (you may want to disable 'Public'), give it a name like 'Conveyor: web dev server access enabled'.
Step 4:
Use the Remote URL from your device (phone, tablet or other machine) to directly access your application.
More information at Conveyor
binding visual studio in local iis ip webconfig
i created a site on my iis7 it's like http://localhost:88/my
i also can access it like this http://myip:88/my
but when a friend of mine from a remote computer tried to access it like this http://myip:88/my it gives him 404 not found
anybody can tell me what should i do to make it work from remote ?
Check your firewall. You will have to open TCP Port 88.
Part 4: Opening Up to the Outside
World
Windows Firewall blocks the World Wide
Web Services port by default (Port
80). With this port blocked, other
machines cannot connect to your web
server. This severely limits the
scope of potential web site viewers.
So, in order to show your new web site
and server to the outside world you
must add an exception to the Windows
Firewall.
Click Start and type firewall into the Search bar and press enter.
(Note: Make sure you select Windows
Firewall and not Windows Firewall with
Advanced Security)
Click Change Settings
Click the Exceptions Tab and Scroll to World Wide Web Services
(HTTP).
Click the check box and click OK.
Now your machine is accessible to the
outside world. You can connect to
your machine by typing in the IP
address of your server into another
machine’s web browser.
source
If firewall setting is not the issue (say it's turned off), find out public IP of your server (ex. 192.168.0.152), then add it to http listener on the server itself
Open cmd and type:
netsh http add iplisten 192.168.0.152
Go Control Panel>System and Security>Windows Firewall>Allowed Programs-> then check all " World Wide Web Services(Http) tab"
Its is worked for me