I’m big enthusiast of Manjaro since 2015 but today I got a problem that I couldn’t resolve on my own. After big updates done few days ago (by update manager) I have a problem with compiling Kernel Drivers on kernel 4.15.18-1. After call make I got error:
make -C /usr/lib/modules/4.15.18-1-MANJARO/build M=/run/media/mati/common/hello_world modules
make[1]: Wejście do katalogu '/usr/lib/modules/4.15.18-1-MANJARO/build'
**Makefile:974: *** "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel". Stop.**
make[1]: Opuszczenie katalogu '/usr/lib/modules/4.15.18-1-MANJARO/build'
make: *** [Makefile:4: all] Błąd 2
The problem is that I cannot install mentioned libraries and command: pacman -Q libelf
returns
libelf 0.170-1
i have no idea what happend, I tried another kernels (I have few versions installed) but each has problems (e.g. the newest, experimental 4.17 has problem with asm goto of gcc compiler). I started learning Linux Kernel Drivers programming but now I can’t learn because of these compilation problems … anyone can help me ?
(Hope my english is understanable).
Greetings !
I got this error while setting up VirtualBox in my Fedora OS 29, I issued the following command and this issue got resolved.
sudo dnf install elfutils-libelf-devel
Are you able to install these packages on your system?
elfutils
elfutils-libelf-devel
libelf-dev
libelf-devel
May require dependencies such as: zlib-devel
For me I had to install elfutils-devel first then install eflutils and eflutils-libelf-devel. libelf-dev and libelf-devel could not be found but when I ran /sbin/vboxconfig again this time it did not error out. I ran the check, "systemctl status vboxdrv" and this time it showed Active: as Active (exited) and I was able to spin up the VM.
Related
I'm trying to implement a custom system call in Ubuntu 20.04.
One of the steps is this command
root#well:/usr/src/linux-5.16.15# sudo make modules_install install
But it gives this error:
arch/x86/Makefile:142: CONFIG_X86_X32 enabled but no binutils support
ln: target '/source' is not a directory
make[1]: *** [Makefile:1477: __modinst_pre] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2
What should I do to resolve it?
I've been at this for days and any help would be seriously appreciated!
From the definition of CONFIG_X86_X32 option:
you will need a recent binutils (2.22 or later) with elf32_x86_x64 support enabled to compile a kernel with this option set.
This definition can be found at arch/x86/Kconfig file in kernel source code (https://elixir.bootlin.com/linux/v5.16.15/source/arch/x86/Kconfig#L2836).
So in order to solve this problem, you can either disable this option or select a distro which supports high version binutils to compile the kernel.
I was trying to install rtl8712de wifi drivers in my Debian 10 PC.
I tried the following code:
sudo apt update
git clone https://github.com/smlinux/rtl8723de.git
cd rtl8723de
make
After I ran the make command, I got the following error:
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules//build M=/home/dantu/Downloads/rtl8723de modules
make[1]: *** /lib/modules//build: No such file or directory. Stop.
make: *** [Makefile:1886: modules] Error 2
I tried so many steps online. I installed gcc build tools, updated all my packages, tried other repositories for the wifi drivers. But nothing seems to help.
It might solve the problem to change all occurrences of /lib/modules//build inside the Makefile with /lib/modules/build or /lib/modules/your_kernel_version/build. //build seem like a typo.
I'm building a Linux kernel on Fedora 28, but always run into the same error such as:
CC init/main.o
init/main.o: warning: objtool: elf_begin: invalid command
make[1]: *** [scripts/Makefile.build:277: init/main.o] Error 1
make[1]: *** Deleting file 'init/main.o'
make: *** [Makefile:1067: init] Error 2
make: *** Waiting for unfinished jobs....
I tried "linux-5.0.16.tar.gz" and "linux-5.0.21.tar.gz" downloaded from kernel.org
, and also tried to follow the instruction on Fedora wiki
But there is no way to avoid this 'invalid command' error. "elfutils-libelf-devel" and "elfutils-libelf" are installed. In the fedora way, 'fedpkg cone -a kernel' was successful, so all dependences are installed. Does anyone know what is missing?
Further progress:
The same procedure works on a different machine installed with Fedora 30.
However, after upgrading the original machine to Fedora 30, the error persists.
The machine with the 'invalid command' problem had an old version of libelf.so installed under /user/local. After removing the old libelf, objtool is linked to the current libelf library, and is able to run during compilation of the linux kernel.
A comment is found in the linux source code /tools/perf/util/symbols.h:
/*
* libelf 0.8.x and earlier do not support ELF_C_READ_MMAP;
* for newer versions we can use mmap to reduce memory usage:
*/
This comment led me to look for an out-dated version of libelf.
I have a problem by compiling a driver (WLAN-dongle Edimax ac600).
I´m using an Archlinux on my raspberry-pi and want to install my dongle for 5Ghz. During comiling the driver I get this message. I tried to install the linux-headers without success. (in other threads it will be a solution)
Here is my output of make:
[root#raspberry_pi_1 rtl8812AU]# make make ARCH=arm CROSS_COMPILE= -C
/lib/modules/4.9.43-1-ARCH/build M=/root/rtl8812AU modules make[1]:
*** /lib/modules/4.9.43-1-ARCH/build: No such file or directory. Stop. make: *** [Makefile:1576: modules] Error 2
I found out that my pi has a two-arch...-directories:
4.9.43-1-ARCH/
4.9.51-1-ARCH/
Only the second one has the build directory...
How can I fix the problem?!
thanks a lot,
a Linux noob...
[Reputation is too low to post comment]
Use uname -r to make sure which version of the kernel you use.
If it's 4.9.43 : you have newer version of the kernel and this confuse your installer. You should reboot on the 51 one
If it's 4.9.51 : You messed up your installation step and are trying to compile for an old target. You should review the compilation process and change every mention of the 4.9.43 to 4.9.51 since it's the version you use.
If you upgrade your kernel, you may have to rebuild the thing again (You may like to have script in the future ;) ) with the new kernel version.
I have installed QT5 that also comes with QT creator on an amd machine running ubuntu 12.04. My grapics driver is a radeon r9270x if that matters.
When I try to compile a basic "hello world" type Qt program I get the error message "cannot find -lGL". I have searched around and here( Qt: can't find -lGL error ) it says to use "sudo apt-get install libgl1-mesa-dev" but when I do I already have that installed. Here ( Installing Qt on linux, cannot find -lGL ) it says to install "sudo apt-get install libgl-dev" but that only gets me
"Reading package lists... Done Building dependency tree Reading
state information... Done Package libgl-dev is a virtual package
provided by: libgl1-mesa-swx11-dev 8.0.4-0ubuntu0.7
libgl1-mesa-dev-lts-trusty 10.1.3-0ubuntu0.1~precise1
libgl1-mesa-dev-lts-saucy 9.2.1-1ubuntu3~precise1
libgl1-mesa-dev-lts-raring 9.1.7-1ubuntu2~precise1
libgl1-mesa-dev-lts-quantal 9.0.3-0ubuntu0.4~precise1
libgl1-mesa-dev 8.0.4-0ubuntu0.7 You should explicitly select one to
install.
E: Package 'libgl-dev' has no installation candidate"
Various other resources that I have used say to do similar things but I get this error still. Any ideas?
As a side not, not knowing the relevance, I could not get QT creator to launch for the longest time. It would always seg fault and core dump. I finally updated my amd catylist control center/video drivers and that fixed the problem.
Here is the compile output from qt creator:
02:34:21: Running steps for project myHelloWorld... 02:34:21:
Configuration unchanged, skipping qmake step. 02:34:21: Starting:
"/usr/bin/make" g++
-Wl,-rpath,/media/UsbExternalDrive/DesignTools/Qt5.3/5.3/gcc_64 -Wl,-rpath,/media/UsbExternalDrive/DesignTools/Qt5.3/5.3/gcc_64/lib -o myHelloWorld main.o
-L/media/UsbExternalDrive/DesignTools/Qt5.3/5.3/gcc_64/lib -lQt5Widgets -lQt5Gui -lQt5Core -lGL -lpthread /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status make: *** [myHelloWorld]
Error 1 02:34:21: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project myHelloWorld (kit: Desktop Qt
5.3 GCC 64bit) When executing step "Make" 02:34:21: Elapsed time: 00:00.
Try running this, restart Qt creator and try a clean build.
sudo apt-get install mesa-common-dev
EDIT:
Could be that you just miss Mesa package. Take a look at XCB dependencies listed here and install what’s missing.
I’ve seen this error also mentioned in a different case, but I don’t remember the solution there. I think I had solved the problem by installing the “libglu1-mesa-dev” package.
sudo apt-get install libglu1-mesa-dev -y
But I am not entirely sure if just this had fixed the issue or I had to install anything else.
So what I found worked for me, I manual added the path to the library and compiled. Then I was able to remove the manually added path. I assume somewhere on the backend it was not searching the correct place and once it was shown it remembered and kept the correct location.