I am working with an esp8266 WiFi module and I can't view my IP address on my serial monitor. I am connected to a hotspot but the serial monitor won't display the IP address. Please I need help....
Related
I am trying to access a serial device on a network computer. The device is connected via USB-Serial cable and is assigned COM8 port.
I tried to use:
import serial
ser = serial.serial_for_url("socket://10.10.10.152:///dev/ttyCOM8")
Which is wrong. I am pretty sure serail_for_url will only accept port number. But I am not sure how to go about that.
I want to get live Stream of IP Camera by using Android App. I dunno where to get the IP address of Camera and how to connect to the Android App. Anyone can help me with this or Guide me that how can I develop an App so I can get the Live stream of IP Camera using their IP address. thanks
most network camera manufacturers have a default IP address for their camera but some will accept an IP address assigned to it via DHCP instead. for example, with axis cameras the default IP address is 192.168.0.90 unless it comes into contact with a DHCP server then it will accept whatever address is assigned to it. you can always change this later.
once you find the IP address use a browser access the web interface and make configuration changes and check your live view.
depending on the camera manufacturer, there is likely an Android App that is designed for your make/model. i hope this helps, cheers!
I have a problem with raspberry pi that when I enter static ip Ethernet in settings, my WiFi does not work.
this is /etc/dhcpcd.conf configuration:
interface eth0
static ip_address=192.168.1.27/24
static routers=192.168.1.1
static domain_name_servers=
static domain_search=
I'm manually connected to my wifi mobile phone.When i set my network configuration to dhcp my wifi problem is solved
I believe the "metric" parameter is what you're looking for:
interface eth0
metric 300
interface wlan0
metric 200
Lowest number has priority.
I've CCT-910 serial port hub and wh EMP 800 coin acceptor. Coin acceptor is connected to hub, and hub to computer.
They're both using same serial port (/dev/ttyUSB0 in Ubuntu 14.04), but their addresses are different. On Windows I can find out the addresses with manufacturer's software, which shows that HUB's address is 80 and coin acceptor's address is 42.
I've added more devices but I need to get the address of each device on the hub. How can I do it on Linux (Ubuntu 14.04)?
Am trying to connect GPRS using Serial Modem in Wince6.0 , while dialing its showing Port opened and device connected but there is no IP address available.Any suggestions please.
When connecting with GPRS you usually need to dial a particular phone number like *99***1# and you may also need to specify the IP gateway or other network specific parameters using additional AT commands.