Have recently installed PowerMTA server on CentOS 6, but unable to start pmta service and getting this error in logs.
service pmta restart
Stopping PowerMTA: [ OK ]
Starting PowerMTA: [FAILED]
/usr/sbin/pmtad --debug
2018-05-26 20:41:27 WARNING (line 15 of /etc/pmta/config): deprecated syntax for max-message-size; use file size syntax (such as in "100K") or "unlimited" instead.
2018-05-26 20:41:27 WARNING (line 82 of /etc/pmta/virtualhost.txt): "auto-cold-virtual-mta" deprecated; use explicitly defined cold Virtual MTAs instead.
2018-05-26 20:41:27 Startup error: Error in line 51 of /etc/pmta/config: Error in line 82 of /etc/pmta/virtualhost.txt: not a valid local IP address
I installed PMTA 4.5 on 5 different VPS and only this one not starting dunno what is wrong.
pmta/virtualhost.txt checked and ip is right.I know thease questions are stupid but i`m new with linux, thanks for help!
The IP in line 82 is a public IP, try to change it to a private one like 192.168...
Related
I am getting error while running a code in chef
chef-client -zr "recipe[test-cookbook::test-recipe1]"
[2020-08-05T16:01:06+00:00] WARN: No config file found or specified on command line. Using command line options instead.
Starting Chef Infra Client, version 16.3.45
[2020-08-05T16:01:08+00:00] ERROR: shard_seed: Failed to get dmi property serial_number: is dmidecode installed?
resolving cookbooks for run list: ["test-cookbook::test-recipe1"]
Synchronizing Cookbooks:
test-cookbook (0.1.0)
Installing Cookbook Gems:
Compiling Cookbooks...
Converging 0 resources
Running handlers:
Running handlers complete
Chef Infra Client finished, 0/0 resources updated in 01 seconds
After a Windows 10 update, I'm getting this error while starting WSL Ubuntu 18.
I have tried to restart a couple of times, but the error is still there
Installing, this may take a few minutes...
WslRegisterDistribution failed with error: 0x800703fa
Error: 0x800703fa Illegal operation attempted on a registry key that has been marked for deletion.
Press any key to continue...
The solution has been provided by Github's user #friedwm on this issue comment:
https://github.com/Microsoft/WSL/issues/2576#issuecomment-380823857
The solution is to restart LxssManager from services.msc, or start it if it is not running.
Settings > Apps&Features > select Ubuntu > Advanced options > Repair
I followed this guide:
https://clusterlabs.org/doc/en-US/Pacemaker/1.1-pcs/html/Clusters_from_Scratch/
I stayed with the Active/Passive DRBD file system sharing. I had to reboot my cluster and now I am getting the following error:
Current DC: rbx-1 (version 1.1.16-12.el7_4.4-94ff4df) - partition with quorum
Last updated: Tue Nov 28 17:01:14 2017
Last change: Tue Nov 28 16:40:09 2017 by root via cibadmin on rbx-1
2 nodes configured
5 resources configured
Node rbx-2: UNCLEAN (offline)
Online: [ rbx-1 ]
Full list of resources:
ClusterIP (ocf::heartbeat:IPaddr2): Started rbx-1
WebSite (ocf::heartbeat:apache): Stopped
Master/Slave Set: WebDataClone [WebData]
WebData (ocf::linbit:drbd): FAILED rbx-1 (blocked)
Stopped: [ rbx-2 ]
WebFS (ocf::heartbeat:Filesystem): Stopped
Failed Actions:
* WebData_stop_0 on rbx-1 'invalid parameter' (2): call=20, status=complete, exitreason='none',
last-rc-change='Tue Nov 28 16:27:58 2017', queued=0ms, exec=3ms
Daemon Status:
corosync: active/disabled
pacemaker: active/disabled
pcsd: active/enabled
Any ideas?
Also does anyone have any recommended guides for submitting jobs?
This post is relatively old at this point but I'll leave this here for others to find if they stumble upon the same issue.
This problem has to do with an issue with the DRBD integration script that pacemaker uses. If it's broken, missing, has incorrect permissions, etc. you can get an error like this. In CentOS 7 that script is located at /usr/lib/ocf/resource.d/drbd
Note: This is specifically for the guide mentioned by OP but may help you:
Section 7.1 has a big "IMPORTANT" block that talks about replacing the Pacemaker integration script due to a bug. If you use the command it tells you to there, you actually replace the script with a 404 Error page which obviously doesn't work, causing the error. You can fix this issue by replacing the script with the original, either by reinstalling DRBD...
yum remove -y kmod-drbd84 drbd84-utils
yum install -y kmod-drbd84 drbd84-utils
...or finding just the drbd script elsewhere and adding/replacing it to /usr/lib/ocf/resource.d/drbd. Make sure its permissions are correct and that it is set as executable.
Hope that helps!
I have installed gerrit server setup in localhost. And after making the successful connection the Web UI has been launched. There i have registered with my gmail id in "Sign in with a Launchpad ID" option.
Its worked earlier, but now it shows the error "Provider is not supported, or was incorrectly entered." when i try to login. I had searched a lot and found some solution regarding the security issues in the installed java in the system. I have Oracle Jdk8 not OpenJdk in my system. so should i have to switch to Open Jdk. Here is my error log messages from log file.
Caused by: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:90)
at sun.security.validator.Validator.getInstance(Validator.java:179)
at sun.security.ssl.X509TrustManagerImpl.getValidator(X509TrustManagerImpl.java:312)
at sun.security.ssl.X509TrustManagerImpl.checkTrustedInit(X509TrustManagerImpl.java:171)
at sun.security.ssl.X509TrustManagerImpl.checkTrusted(X509TrustManagerImpl.java:184)
at sun.security.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:124)
at sun.security.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1491)
at sun.security.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:216)
at sun.security.ssl.Handshaker.processLoop(Handshaker.java:979)
at sun.security.ssl.Handshaker.process_record(Handshaker.java:914)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:1062)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1375)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1403)
... 66 more
Caused by: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at java.security.cert.PKIXParameters.setTrustAnchors(PKIXParameters.java:200)
at java.security.cert.PKIXParameters.<init>(PKIXParameters.java:120)
at java.security.cert.PKIXBuilderParameters.<init>(PKIXBuilderParameters.java:104)
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:88)
... 78 more
Issue Fixed !
As i have been using Oracle Java 8, i have installed Open Jdk 7 with the following commnad.
sudo apt-get install ca-certificates-java
But issue resolved only when i have changed java home variable in gerrit.config file.
javaHome = /usr/lib/jvm/java-7-openjdk-amd64/jre
Now the issues fixed for me..
I am starting to use VACaMobil, a module for OMNET++ which allows, while evaluating
ITS solutions, to have a constant number of cars during a simulation period.
After making some changes to the code, I tried to run VACaMobil, with the configuration
flows 2. The simulation aborted and I got the following messages from sumo-launchd.py:
jcmh#juanca-freya:~$ python Proyectos-OMNeT++/inet/etc/sumo-launchd.py -vv -c sumo-gui
Logging to /tmp/sumo-launchd.log
Listening on port 9999
Connection from 127.0.0.1 on port 49847
Handling connection from 127.0.0.1 on port 49847
Got TraCI message of length 2
Got TraCI command of length 1
Got TraCI command 0x0
Got CMD_GETVERSION
Got TraCI message of length 248
Got TraCI command of length 247
Got TraCI command 0x75
Got CMD_FILE_SEND for "sumo-launchd.launch.xml"
Got CMD_FILE_SEND with data "<launch>
<copy file="downtown.mapa.xml"/>
<copy file="downtown.routes.xml"/>
<copy file="downtown.sumo.cfg" type="config"/>
<basedir path="../examples/VACaMobil/flows/Milan/"/>
<seed value="2"/>
</launch>
"
Creating temporary directory...
Temporary dir is /tmp/sumo-launchd-tmp-dsJ7kR
Base dir is ../examples/VACaMobil/flows/Milan/
Seed is 2
Finding free port number...
Claiming lock on port
...found port 56172
Releasing lock on port
Cleaning up
Result: "None"
Aborting on error: file "../examples/VACaMobil/flows/Milan/downtown.mapa.xml" does not exist
Closing connection from 127.0.0.1 on port 49847
A user posted a message in the blog of Sergio Tornell, one of the VACaMobil developers, asking to help,
because he had a problem similar to mine. The answer was: "It seems like you are using windows. You
have to modify all the routes, in windows you use "\" instead of "/"". He certainly was using Windows,
but I am in GNU/Linux.
What could be the problem? I don't think to be because backslashes, since I am in GNU/Linux.
I am using Elementary OS 3 (based in Ubuntu 14.04), OMNeT++ 4.6, VACaMobil for INET framework and SUMO 0.18.0.
Thanks in advance.
The way to solve this problem was simply:
To go to folder where was sumo-launchd.py:
jcmh#juanca-freya:~$ cd Proyectos-OMNeT++/inet/etc
Run sumo-launchd.py directly:
jcmh#juanca-freya:~/Proyectos-OMNeT++/inet/etc$ python sumo-launchd.py -vv -c sumo-gui