I am trying to build nuxeo source code & noticing below build issue. I noticed similar reported issue here. Has anyone faced similar issue?
Build error:
[exec] Transform Dart2JS on nuxeo_api_playground|web/index.web_components.bootstrap.dart threw error: type 'PrefixElementX' is not a subtype of type 'MemberEntity' in type cast where
An Ant BuildException has occured: The following error occurred while executing this line:
[ERROR] /Users/kalava/Documents/Work/DAM/NuxeoOpenSource/nuxeo/addons/nuxeo-api-playground/src/main/dart/build.xml:9: exec returned: 65
[ERROR] around Ant part ...... # 4:278 in /Users/kalava/Documents/Work/DAM/NuxeoOpenSource/nuxeo/addons/nuxeo-api-playground/target/antrun/build-main.xml
Do you have the proper Dart version, as documented at https://doc.nuxeo.com/corg/installing-dart-and-related-tools/? Currently Nuxeo build requires Dart 1.23.x.
Related
error: failed to download `adler v1.0.2`
Caused by:
unable to get packages from source
Caused by:
failed to parse manifest at `/home/actionanand/.cargo/registry/src/github.com-1ecc6299db9ec823/adler-1.0.2/Cargo.toml`
Caused by:
could not parse input as TOML
Caused by:
unexpected character found: `\u{0}` at line 1 column 1
Rust .toml file was full of red line when we add new dependency
This is caused by the crash of internal package (say cargo)
we can solve this by following the steps
Please clear the cargo registry
rm -rf /home/username/.cargo/registry/
And follow the proceedure shown after this, if you use old version
For the reference, I've given the proceedure also below:
If you are trying to migrate from the previous edition (2018), the
process requires following these steps:
1. Start with `edition = "2018"` in `Cargo.toml`
2. Run `cargo fix --edition`
3. Modify `Cargo.toml` to set `edition = "2021"`
4. Run `cargo build` or `cargo test` to verify the fixes worked
More details may be found at
https://doc.rust-lang.org/edition-guide/editions/transitioning-an-existing-project-to-a-new-edition.html
You may need to to add --allow-no-vcs sometimes (it'll be prompted by the terminal) as below
cargo fix --edition --allow-no-vcs
I'm getting this error after running npx react-native run-android, and I'm new to react and node in general so I'm not sure what could be going on.
gradle build --warning-mode all runs successfully with no issue. Not sure what could be going on. Running react-native upgrade doesn't help as suggested in similar questions, but it does give the error "Accessing non-existent property 'padLevels' of module exports inside circular dependency", though I think it's unrelated.
I'm on npm 6.14.10, node v14.15.4, Gradle 6.4, react-native-cli 2.0.1, react-native 0.63.4, openjdk 14.0.2
> Task :app:compileDebugJavaWithJavac FAILED
Deprecated Gradle features were used in this build, making it incompatible with Gradle 7.0.
Use '--warning-mode all' to show the individual deprecation warnings.
See https://docs.gradle.org/6.4/userguide/command_line_interface.html#sec:command_line_warnings
106 actionable tasks: 2 executed, 104 up-to-date
/android/app/src/main/java/com/test/MainApplication.java:20: error: cannot find symbol
return BuildConfig.DEBUG;
^
symbol: variable BuildConfig
/android/app/src/main/java/com/test/MainApplication.java:59: error: cannot find symbol
if (BuildConfig.DEBUG) {
^
symbol: variable BuildConfig
location: class MainApplication
/android/app/src/main/java/com/test/MainApplication.java:59: error: illegal parenthesized expression
if (BuildConfig.DEBUG) {
^
Note: /android/app/src/debug/java/com/test/ReactNativeFlipper.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
I am working with Ionic project and I need to run this project with my android studio. I have resolved all the issues which are coming in the gradle file but when I am trying to run the code getting below error
error - No resource identifier found for attribute 'appComponentFactory' in package 'android'
enter image description here
above image is when I have fixed all the issue
but getting below error on runtime
**AGPBI: {"kind":"error","text":"No resource identifier found for attribute \u0027appComponentFactory\u0027 in package \u0027android\u0027","sources":[{"file":"/Users/naya-pc/Documents/Ionic/xyz/platforms/android/build/intermediates/manifests/full/debug/AndroidManifest.xml","position":{"startLine":57}}],"original":"","tool":"AAPT"}
/Users/naya-pc/Documents/Ionic/xyz/platforms/android/build/intermediates/manifests/full/debug/AndroidManifest.xml:58: error: No resource identifier found for attribute 'appComponentFactory' in package 'android'
:processDebugResources FAILED
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':processDebugResources'.
> com.android.ide.common.process.ProcessException: Failed to execute aapt**
Also, I have tried the basic technique to resolve this type of issue
1. clean project
2. rebuild project
3. invalidate the cache and restart
but still getting the same issue.
I have changed almost every gradle file with the new one and old one but getting the same issue below are my gradle and they are working gradle.
compile "com.android.support:support-v4:22.0.0"
compile "com.android.support:appcompat-v7:22.0.0"
compile "com.facebook.android:facebook-android-sdk:4.+"
compile "com.google.gms:google-services:+"
compile "com.google.android.gms:play-services-tagmanager:+"
compile "com.google.firebase:firebase-core:+"
compile "com.google.firebase:firebase-messaging:+"
compile "com.google.firebase:firebase-crash:+"
compile "com.google.firebase:firebase-config:+"
compile "com.google.android.gms:play-services-base:15.0.1"
compile "com.google.android.gms:play-services-ads:15.0.1"
compile "com.google.android.gms:play-services-auth:15.0.1"
compile "com.google.android.gms:play-services-identity:15.0.1"
Please help me if you have any solution for this issue.
I would like to integrate libreoffice on my tx6s-8035 KARO Board using yocto. I use Ka-ro NXP/Freescale Yocto Project Community BSP recipe layers for yocto distro krogoth. I add too the meta-office layer from open-embedded. I have been facing many issues about packages and libraries dependency to build the libreoffice package. The do_compile task work well but the do_package task fails with the following error:
ERROR: libreoffice-5.0.6.3-r0 do_package: QA Issue: File
'/usr/lib/libreoffice/share/extensions/mysql-connector-
ooo/libmysqlclient_r.so' from libreoffice was already stripped, this will
prevent future debugging! [already-stripped]
WARNING: libreoffice-5.0.6.3-r0 do_package: libreoffice language file
pattern not found: /usr/lib/libreoffice/share/template/%{1}
ERROR: libreoffice-5.0.6.3-r0 do_package: Fatal QA errors found, failing
task.
ERROR: libreoffice-5.0.6.3-r0 do_package: Function failed: do_package
ERROR: Logfile of failure stored in: /home/sconte/fsl-community-
bsp/build_8135_cim/tmp/work/cortexa9hf-neon-poky-linux-
gnueabi/libreoffice/5.0.6.3-r0/temp/log.do_package.8211
ERROR: Task 11 (/home/sconte/fsl-community-bsp/sources/meta-office/recipes-
libreoffice/libreoffice/libreoffice.bb, do_package) failed with exit code
'1'
Here is the log.do_package file output: log.do_package
I view in this file that there is runstrip function which is executed on the same library it cound not find. What does runstrip means? How can i work around this issue?
You can add INSANE_SKIP_${PN}_append = "already-stripped" to libreoffice_%.bbappend recipe to fix this QA error. You can also send a patch upstream by following README.
I have installed OpenJDK as mentored below. But i still keep getting this error. I have set the right PATH in bash_profile.
Can someone help me out of this?
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler- plugin:2.3.2:compile (default-compile) on project poker-protocol: Compilation failure
[ERROR] Unable to locate the Javac Compiler in:
[ERROR] /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/../lib/tools.jar
[ERROR] Please ensure you are using JDK 1.4 or above and
[ERROR] not a JRE (the com.sun.tools.javac.Main class is required).
[ERROR] In most cases you can change the location of your Java
[ERROR] installation by setting the JAVA_HOME environment variable.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <goals> -rf :poker-protocol
In my bash_profile i have this:
JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre
export M2_HOME=/usr/local/apache-maven-3.0.4
export PATH=${M2_HOME}/bin:${PATH}:$JAVA_HOME/bin
Can someone help me out?
You have installed the Java runtime, but to develop Java applications you need the JDK, hence you must install the OpenJDK devel package,in your case java-1.6.0-openjdk-devel-1.6.0.0.x86_64.
Not so sure about that but in my case i have set it this way :
export JAVA_HOME=/usr/lib/jvm/jdk1.7.0_11/
export PATH=$JAVA_HOME/bin:$PATH
I have done this in bash.bashrc
Try adding export before providing the variable name. Another thing i discovered even thought am not using openjdk, is that the tool.jar is not locate in the jre directory but under jdk directory.
Hope this helps.
you need to install the java-1.6.0-openjdk-devel installing the java-1.6.0-openjdk just installs JRE .