i want to run a sed command with programatically with changing parameters.
the thing is that i cant find the correct syntax to do so.
i want to configure a conf file with this and
change a dir path to another.
i'm currently using:
RESULT=$("sed 's/--ROOT_DIR--/${root_inst_dir}/g' ${root_inst_dir}/${tool_name}/etc/${tool_name}.conf > ${SOURCE_DIR}/${tool_name}.conf")
and i get the error message:
./change_tst.sh: line 7: sed 's/--ROOT_DIR--//home/test_dir/g' /home/tst/conf.conf > /home/script_tst/conf.conf: No such file or directory
the ">" is not working for some reason.
what am i doing wrong? or what is the best way to do this ?
UPDATE
i drooped the result variable and now running this:
(sed 's/--ROOT_DIR--/$root_inst_dir/g' ${root_inst_dir}/${tool_name}/etc/${tool_name}.conf) > ${SOURCE_DIR}/${tool_name}.conf
the new file is being created in > ${SOURCE_DIR}/${tool_name}.conf,
but the search/replace is happening literally and not as a variable...
thanks.
Putting " inside parenthesis will result in bash wanting to execute a command named exactly:
sed 's/--ROOT_DIR--/${root_inst_dir}/g' ${root_inst_dir}/${tool_name}/etc/${tool_name}.conf > ${SOURCE_DIR}/${tool_name}.conf"
Such command does not exist on your system.
Probably you intended to put " outside $(...):
RESULT="$(sed 's/--ROOT_DIR--/${root_inst_dir}/g' ${root_inst_dir}/${tool_name}/etc/${tool_name}.conf > ${SOURCE_DIR}/${tool_name}.conf)"
Better way, if you don't need the RESULT variable and if you want to properly escape root_inst_dir variable:
sed 's#--ROOT_DIR--#'"${root_inst_dir}"'#g' "${root_inst_dir}/${tool_name}/etc/${tool_name}.conf" > "${SOURCE_DIR}/${tool_name}.conf"
Or if you need RESULT variable:
sed 's#--ROOT_DIR--#'"${root_inst_dir}"'#g' "${root_inst_dir}/${tool_name}/etc/${tool_name}.conf" > "${SOURCE_DIR}/${tool_name}.conf"
RESULT=$(cat ${SOURCE_DIR}/${tool_name}.conf)
Related
Im trying to rename some files with the format Week_XX_2018-XX-XX_-_2018-XX-XX.md to Week_XX_2018-XX-XX/2018-XX-XX.md. So changing _-_ to /.
I tried to use rename and first tested it with the -n option. This works fine and shows something like this for all the files:
$ rename -n 's/_-_/\//g' *
rename(Week_01_2018-12-03_-_2018-12-09.md, Week_01_2018-12-03/2018-12-09.md)
...
However, when executed without the -noption the command fails. It says
Can't rename Week_01_2018-12-03_-_2018-12-19.md Week_01_2018-12-03/2018-12-09: No such file or directory
Why does this happen? How can the test of the command work but not the actual command?
The character '/' is special as it is used as path delimiter. See Is it possible to use "/" in a filename? for a more detailed answer on why your rename fails.
Im testing my code for automation of the installation of a software
In bashrc file below:
# User specific aliases and functions
export JAVA_HOME=/opt/jdk-9.0.1
export JRE_HOME=/opt/jdk-9.0.1/jre
export SCALA_HOME=/opt/scala-2.13.0
export PATH=$PATH:/opt/jdk-9.0.1/bin:/opt/jdk-9.0.1/jre/bin
Here im trying to add $SCALA_HOME/bin to PATH.
this is the required output:
`export PATH=$PATH:/opt/jdk-9.0.1/bin:/opt/jdk-9.0.1/jre/bin:/opt/scala-2.13.0`
`sed -i '1n;/^export PATH/i\export SCALA_HOME=/opt/scala-2.13.0' .bashrc`
the above code worked to append SCALA_HOME above path but for appending in the same line im not able to do
`sed -i "s/\"export PATH\":.*,$/\"export PATH\": \":$SCALA_HOME/bin\",/g" .bashrc
sed: -e expression #1, char 40: unknown option to `s'`
please help me get the correct sed command to append SCALA_HOME in the PATH
You can use this:
sed '/export PATH/ s/$/:\$SCALA_HOME\/bin/' .bashrc
's/\(export PATH=.*\)/\1:\$SCALA_HOME\/bin/'
To go through your expression:
s/\"export PATH\":.*,$/\"export PATH\": \":$SCALA_HOME/bin\",/g"
The \"export will look for "export in your file. Why do you expect a double quote before the export? It isn't there in the example. Likewise, PATH\": in the pattern will look for PATH": in the file. That double quote isn't there either. Your ,$ at the end of your pattern will also prevent it from matching anywhere.
I am trying to create a shell script for logs and trying to append data into a text file. I have write this sample "test.sh" code for testing:
#!/bin/sh -e
touch /home/sample.txt
SPTH = '/home/sample'.txt
echo "MY LOG FILE" >> "$SPTH"
echo "DUMP started at $(date +'%d-%m-%Y %H:%M:%S')" >> /home/sample.txt
echo "DUMP finished at $(date +'%d-%m-%Y %H:%M:%S')" >> /home/sample.txt
but in above code all lines are working correct except one line of code i.e.
echo "MY LOG FILE" >> "$SPTH"
It is giving error:
test.sh: line 6: : No such file or directory
I want to replace this full path of file "/home/sample.txt" to variable "$SPATH".
I am executing my shell script using
sh test.sh
What I am doing wrong.
Variable assignments in bash shell does not allow you to have spaces within. It will be actually interpreted as command with = and the subsequent keywords as arguments to the first word, which is wrong.
Change your code to
SPTH="/home/sample.txt"
That is the reason why SPTH was not assigned to the actual path you intended it to have. And you have no reason to have single-quote here and excluding the extension part. Using it fully within double-quotes is absolutely fine.
The syntax for the command line is that the first token is a command, tokens are separated by whitespace. So:
SPTH = '/home/sample'.txt
Has the command as SPTH, the second token is =, and so on. You might think this is daft, but most shells behave like this for historical reasons.
So you need to remove the whitespace:
SPTH='/home/sample'.txt
Ok, here I'm again, struggling with ssh. I'm trying to retrieve some data from remote log file based on tokens. I'm trying to pass multiple tokens in egrep command via ssh:
IFS=$'\n'
commentsArray=($(ssh $sourceUser#$sourceHost "$(egrep "$v" /$INSTALL_DIR/$PROP_BUNDLE.log)"))
echo ${commentsArray[0]}
echo ${commentsArray[1]}
commax=${#commentsArray[#]}
echo $commax
where $v is something like below but it's length is dynamic. Meaning it can have many file names seperated by pipe.
UserComments/propagateBundle-2013-10-22--07:05:37.jar|UserComments/propagateBundle-2013-10-22--07:03:57.jar
The output which I get is:
oracle#172.18.12.42's password:
bash: UserComments/propagateBundle-2013-10-22--07:03:57.jar/New: No such file or directory
bash: line 1: UserComments/propagateBundle-2013-10-22--07:05:37.jar/nouserinput: No such file or directory
0
Thing worth noting is that my log file data has spaces in it. So, in the code piece I've given, the actual comments which I want to extract start after the jar file name like : UserComments/propagateBundle-2013-10-22--07:03:57.jar/
The actual comments are 'New Life Starts here' but the logs show that we are actually getting it till 'New' and then it breaks at space. I tried giving IFS but of no use. Probably I need to give it on remote but I don't know how should I do that.
Any help?
Your command is trying to run the egrep "$v" /$INSTALL_DIR/$PROP_BUNDLE.log on the local machine, and pass the result of that as the command to run via SSH.
I suspect that you meant for that command to be run on the remote machine. Remove the inner $() to get that to happen (and fix the quoting):
commentsArray=($(ssh $sourceUser#$sourceHost "egrep '$v' '/$INSTALL_DIR/$PROP_BUNDLE.log'"))
You should use fgrep to avoid regex special interpretation from your input:
commentsArray=($(ssh $sourceUser#$sourceHost "$(fgrep "$v" /$INSTALL_DIR/$PROP_BUNDLE.log)"))
Here is an extract from a script showing the variables for the script
PathToPiconPNG="/var/OscamSrvidPicon/picon/19.2E/"
PathToOscamSrvid="/var/OscamSrvidPicon/picon/19.2E/oscam.srvid"
PathToPiconTPL="/var/OscamSrvidPicon/oscam_picons/"
PathToTmp="/tmp/"
I want to run this script numerous times replacing (for example) this line:
PathToPiconPNG="/var/OscamSrvidPicon/picon/19.2E/"
with this lines
PathToPiconPNG="/var/OscamSrvidPicon/picon/28.2E/"
I have tried using sed (I know this example is wrong but you might get what im trying to achieve)
sed 's/{PathToPiconPNG="/var/OscamSrvidPicon/picon/19.2E/"}/{PathToPiconPNG="/var/OscamSrvidPicon/picon/28.2E/"}/g' filename.txt > newfilenam.txt
If that is not possible, is there any way that I can set the variable externally from another script
sed -E 's/picon\/.+\//picon\/28.2E\//' filename.txt > newfilenam.txt