Excel Image
I want to loop through Coloum to bring the value as the following Example:
in Cell E4
If A4 >= C4 && A4 <= D4, Bring the value of B4
If A5 >= C4 && A5 <= D4, Bring the value of B5
If A6 >= C4 && A6 <= D4, Bring the value of B6
Up to
If A27 >= C4 && A27 <= D4, Bring the value of B27
then I will sum all the brought values.
Then to continue in Cell E5 with the same criteria up to cell E27
There are a few days to do this but the easiest is probably with SUMIFS.
For example, this:
=SUMIFS(B:B,C:C,"<="&A:A,D:D,">="&A:A)
...will give you the sum of cells in Column B where Column A is between Column C and Column D.
(This tested fine on a couple rows that I tried but that's all I was willing to test since (as was mentioned) an image of your data isn't very helpful.)
You can adjust it to contain whichever area needs to be included/excluded and you can use add the results of multiple SUMIFS functions to sum results from different areas.
More Information
Office.com : SUMIFS Function (with Video)
Related
What I think I am looking for is a rolling calculation, for example:
If A2 = F2:F4 Then subtract B2 from G2 and add C2 with result in D2. This would continue until it reaches the same part again like in rows 3,4,8,and 10. Once a part is repeated rather than looking at the column G I would like it to use the latest value in D.
A3 = F2:F4 subtract B3 from G3 and add C3 with result in D3 (20-5+0-15)
A4 = F2:F4 subtract B4 from D4 and add C4 with result in D4 (15-2+0-13)
A8 = F2:F4 subtract B8 from D8 and add C8 with result in D8 (13-8+7-12)
A10 = F2:F4 subtract B10 from D10 and add C10 with result in D10 (12-2+0-10)
Use VLOOKUP to return the correct start, and SUMIFS with dynamic range to do the subtraction and addition.
=VLOOKUP([#PART],Table3,2,FALSE)-SUMIFS($B$2:B2,$A$2:A2,[#PART])+SUMIFS($C$2:C2,$A$2:A2,[#PART])
Note: to use only structured references we need to introduce the volatile OFFSET:
=VLOOKUP([#PART],Table3,2,FALSE)-
SUMIFS(OFFSET(Table2[[#Headers],[QTY]],1,,ROW()-ROW(Table2[[#Headers],[QTY]])),OFFSET(Table2[[#Headers],[PART]],1,,ROW()-ROW(Table2[[#Headers],[PART]])),[#PART])+
SUMIFS(OFFSET(Table2[[#Headers],[DELIVERED QTY]],1,,ROW()-ROW(Table2[[#Headers],[DELIVERED QTY]])),OFFSET(Table2[[#Headers],[PART]],1,,ROW()-ROW(Table2[[#Headers],[PART]])),[#PART])
I have a list of numbers(about 199 in all) in a column. I want to calculate absolute values of the differences between first numbers from top and bottom, second numbers from top and bottom , third numbers from top and bottom until I get to the middle. These will be written in another column next to the existing column. I need the most efficient way to do this. Please kindly help me with possible way to do this in excel.
With Excel 365 and data in A1 throught A8, in C1 enter:
=INDEX(A1:A8,SEQUENCE(4))-INDEX(A1:A8,9-SEQUENCE(4))
With any even number of values in column A, consider:
=LET(x,A1:A8, n,COUNT(x), hlf,SEQUENCE(n/2), INDEX(x,hlf)-INDEX(x,n+1-hlf))
The values in C1 through C4 are equivalent to :
A1 - A8
A2 - A7
A3 - A6
A4 - A5
EDIT#1:
To "reflect" the top rows into C5 through C8, in C5 enter:
=INDEX(C1:C4,SEQUENCE(4,,4,-1))
(You may need to wrap the C1 formula in ABS() to avoid negative values.)
Table1 data
i need sumproduct of c1 with c2 , c1 with c3 and so on wile scrolling down the formula like table 2
some thing like this
Paste the below formula to any cell where you would want C1+C2, then drag it down:
=SUM($D$5:$D$12)+SUM(OFFSET($D$4,1,ROW(1:1),8))
What this does is it first sums D5:D12, which is the sum of your C1, then makes use of OFFSET to SUM C2 values in your first cell. Once you drag this down, the ROW(1:1) will move to ROW(2:2), which adjusts the OFFSET to capture the C3 values. This is as well true when you drag it down again for the C4 values.
I have a question for executing quickly.
A1:C3 is original. I want to create a new based on it and F1:F3.
A8 is A3 / F1.
A7 is A2 / F2.
A6 is A1 / F3.
B7 is B2 / F1.
B6 is B1 / F2.
C6 is C1 / F1.
I want to use formula to do this rather than input A8 = A3/F1. And do it many times in each cells.
How can I do?
This formula should do it:
=IF(A1<>"",A1/INDEX($F$1:$F$3,1+(ROW()-ROW($A$6)+COLUMN()-COLUMN($A$6))),"")
You have to put it in A6 and copy it to the other cells.
(#Rob Gale: ok :-) )
First you have to check for empty cells (A1<>"").
Then the numerator of the division is simply a reference and can easily copied between the formulas (A1).
The tricky one is the nominator. The sum of the row and column offsets of the respective cell is calculated and used as index into the 'percentage range' in column F.
Select A6:C8
Press F2
Copy and paste this formula
=CHOOSE({1,2,3;4,5,6;7,8,9},A1,B1,C1,A2,B2,C2,A3,B3,C3)/CHOOSE({3,2,1;2,1,1;1,1,1},F1,F2,F3,F1,F2,F3,F1,F2,F3)
Press Ctrl+Shift+Enter
I want to change cell value according to my sum means if i give total 2000 in "A5" than value change automatic in cell range A1 to A4.
It's confusing to answer your question without knowing more.
Assuming you are working in Excel, if you have the following numbers
A1 A2 A3 A4 A5
5 6 7 8 1000
you can set the following formula for A1, A2, etc.
=IF($A$5=2000,*value that you want cells to read, "")
Essentially if the condition on cell A5 is met, in this case reaching 2000, you will change the value of cell A1 - A4 to a specified amount. If it doesn't reach 2000, you will keep the original value.
You could have formulas in A1 to A4 as percentages of A5,
for example,
A1: =0.1*A5
A2: =0.2*A5
A3: =0.3*A5
A4: =0.4*A5