I already installed Sublime Text 3.... But it doesn't works properly.... Is there anything else to do?? Actually I'm fresher to sublime.So I need your help to continue... Besides of installing Sublime text I didn't installed any other thing.... I think is there something to install... That's why this happens.. What all steps are needed to install to run my sublime properly.. So please help me to solve.... Does every other version Sublime Text need this steps??
ADVANCE THANKS FOR YOUR KIND HELP...
You must first go to this url
https://packagecontrol.io/installation
From this site you will get the steps..You need to install first package control..Each version has its own package control..
Related
I've just done a clean install of Sublime 3 on a mid-2010 iMac. For some reason I don't understand, Package Manager is missing.
I've checked the user settings and nothing there is overriding this. Can anyone please suggest how I can make Package Manger available? Thank you.
You have to install it again, https://packagecontrol.io/installation
I've installed a couple of Sublime Text 3 packages recently and have noticed that some of the commands that should be available via the package do not show in the command palette, though other commands for the same package do.
Specifically, I installed the package PHPCompanion and all of the commands show in the pallette but insert_php_constructor_property:
Or the package PHP Getters and Setters, none of the commands are available.
I'm actually not even sure where to start as far as troubleshooting this. Most of the links I've found so far say "uninstall the package and reinstall it" (which I've done) and "make sure the packages aren't in your Ignore Packages preference properties" (which I've confirmed).
Is there something else I can do to figure out why the commands are not available?
I figured out how to fix the issue (though I still don't know what the issue was).
I deleted the Sublime Text app and installed a new version from the sublime home page. After launching the new version the commands started showing up.
Note that I only deleted the app itself, I did not delete the Application Support or Preference files. This means all of my previously installed packages, themes, and even session were all still in place.
Hopefully this helps anyone else that runs into the same issue.
Note: I´ve searched for sublime here at the forum first, in order to post a question, because I wasn´t sure if this question was adequate for this specific forum and wanted to compare it with other posts. If it shouldn´t be here, please tell me so, and I´ll gladly close it here and open it in any other stackoverflow´s forum. Thanks.
I´ve just installed sublime3. After that I´ve installed package control.
But even when I try and install some packages using package control not all packages get installed, even when I get the "successfully installed" message at the bottom of the window.
To install a new package I go to preferences/package control/install package, and after getting the "successfully installed message" I go to /list packages and it´s not there.
I realised that maybe that´s because some packages are not compatible with sublime 3 (even there it shouldn´t be the successfully installed message there).
So, I´ve tried the latest sublime3 version of emmet, but it seems that´s not working (I´ve tried some shortcuts without any success). So I´ve watched Chris Coyer screencast to check out if I´ve missed something, but it still won´t work.
I´ve tried installing it manually: I´ve went to C:\Program Files\Sublime Text 3\Packages (I´ve installed the x64 package, but for some reason it´s not installed into \Program Files (x86)).
And then I copy/paste the unzipped folders of /emmet-sublime-master and /PyV8 (I´ve tried naming the folder just emmet).
And still, it won´t work. This kinda happened to me with a lot of packages, I´ve installes several of them, and when I go to preferences/package control/list packages, I get only 3 of them.
I came across this issue as well. This thread (https://github.com/wbond/package_control/issues/874) directed me to delete the entry for Package Control under "Ignored Packages" in my User Settings File. Once that was deleted, I restarted, and it worked as expected.
In SublimeText go to Preferences -> Settings. In the opened file Preferences.sublime-settings remove Package Control from ignored_packages list (see below). Save the file and restart Sublime.
{
"font_size": 11,
"ignored_packages":
[
"Vintage",
"Package Control" <---- REMOVE
]
}
For me, Package Control was already removed from ignored_packages, so that didn’t help. But the Sublime Text console held messages which indicated the problem. (Press Ctrl+` to open the console.)
PermissionError: [Errno 13] Permission denied: '/home/myuser/.config/sublime-text-3/Cache/Package Control/merged-ca-bundle.crt'
And changing ownership on the Package Control directory allowed me to use Package Control again:
chown -R myuser:myuser '/home/myuser/.config/sublime-text-3/Cache/Package Control/'
For me, after try to remove and reinstall the Sublime and verified the ignored_packages, I installed python and restart the sublime. So it worked.
In Terminal:
sudo apt install python python3
I am using Ubuntu 20.04.
I've been trying to get node.js installed on my home PC for a while now with no luck. I've tried different versions for the past couple months and no matter what I try it starts rolling back the install at "Creating shortcuts" and it fails to install. I created an install log for anyone who wants to look at it and take a stab at helping me solve the problem. Thanks!
https://dl.dropbox.com/u/177486/MSIf99e3.LOG
I have faced the same problem, I have resolved my issue. I just mark performance counter to Install when required during installation of node.js
Windows Installer is reporting that it's installed even though it's been rolled back.
Run msiexec /x {29552F29-7FE9-441F-BC56-E6B591587A59}
Where the above guid is the ProductCode value from your log.
If that doesn't work and you have access to Orca.exe from the Windows SDK, you may be able to modify WixSchedInternetShortcuts to a false condition and install successfully. To do that, install Orca, then right click on the node.js msi file and choose 'Edit with Orca' then:
Highlight InstallExecuteSequence under "Tables" on the left.
Find WixSchedInternetShortcuts in the right
Double-click the Condition cell and change VersionNT > 400 to 0
Go to File -> Save
Run the installer again
After installing this version, you should be able to cleanly remove it via Add/remove programs and install another version without modifying the msi file.
I had the same problem with v0.10.35. (23 Jan 2015)
All I had to do was disable the shortcuts in the custom install pane and it worked fine:
My solution
You must install each item separately.
Npm package manager
Add to path
Online documentation ...
Nodejs runtime / Performans counter
(İmportant) nodejs runtime / Event tracing(etw) (select"feature will be installed be required"
restart computer
Last install view
All above methods do not work.
-running msiexec as admin
-msiexec /x ...
-modifying WixSchedInternetShortcuts
-dropping the row WixSchedInternetShortcuts
-even this: removing the option of creating shortcut to online documentation during the installation
Might manually fix it, you can read this help to install product and then add C:\Program Files\nodejs Path to Windows Environment variables.
Open the command promt and paste the below comman
reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib_V2Providers{793c9b44-3d6b-4f57-b5d7-4ff80adcf9a2}" /s
reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib_V2Providers{1e2e15d7-3760-470e-8699-b9db5248edd5}" /s
If you get a result for the command , go to the registry key and delete that key. Now try to install it again. You should be able to install it now.
msiexec /i node.msi /qn+ ADDLOCAL=ALL REMOVE=NodePerfCtrSupport,NodeEtwSupport
This might help
Had the same problem. Solution 1 provided by Jim Schubert did not fix it. I then used Orca to edit the installation file. Changing the VersionNT condition also did not fix it for me. I then just dropped the rows from WixSchedInternetShortcuts and it installed successfully. I guess it had some problem with writing the shortcuts. I had also previously tried running msiexec as admin ("/a" option), but this didn't fix it...
One point to be aware of (I learn it the hard way): even after having edited the installer with Orca, don't try to uncheck the checkboxes for shortcuts creation in the installer, leave them checked or it will fail with the same error message.
It happened to me as well, I removed almost everything from the installation and completed the installation. After that I ran the installation again and added one by one until I installed all.
You can always use chocolately install:
https://chocolatey.org/packages/nodejs.install/8.11.1
choco install nodejs.install --version 8.11.1
Check if Avast Antivirus is installed in your machine.
If it is turn off the shields and try installing nodejs
Now it works completely fine...
This morning, I started getting that message when I attempt to open a file in Vim. Vim is my editor of choice for config files, git commit messages and the like, but is not my day to day code editor. I clearly did something to invite this message, but I have no idea what. I did recently uninstall an older version of XCode from /Developer-3.2.6, but that's the only thing that comes to mind that seems even tangentially related.
I'm running OSX Lion. Is Excuberant ctags part of the base install? I know I didn't install it intentionally, but if it's not native, then maybe it came along with something else? Any ideas about how to either get the plugin back or remove references to it so I don't get the warning message?
Thanks.
For Ubuntu and derivatives:
sudo apt-get install exuberant-ctags
With yum:
sudo yum install ctags-etags
FWIW I had the same error message on Ubuntu, I simply installed ctags and everything hunky dory. Thanks :)
That looks a lot like the message the taglist plugin emits when it can't find a ctags program. If you run :scriptnames, do you see plugin/taglist.vim in the list of sourced files? If you do, then you'll probably want to remove that and doc/taglist.txt under the same directory structure.
If you are using Gvim in a Windows system, you should download a ctag Windows program (that is ctag.exe) and put the ctag.exe in the vim74 file dir, then reboot Gvim, and it will find it and use it! I hope this is helpful.
Take a look at this: http://vim-taglist.sourceforge.net/installation.html
Thanks, guys. I ended up reinstalling XCode and it looks like the problem has gone away. I have no idea how I got it into whatever state it was in, but it's back now and everything looks to be back to normal.
I encountered the same issue after upgrading to Mountain Lion. I fixed it by reinstalling the CLI tools from XCode preferences > Downloads. I had the CLI tools installed before upgrading. Not sure what happened, but it works now.
I encountered this issue on a host, but I didn't have permission to install any packages.
But i did find out the gctags was present on that system.
I created a softlink for the gctags binary in a location that was included in my PATH environment variable.
$ln -s /usr/bin/gctags ~/bin/ctags**
You can do the same if you find etags binary in your system, and have no way to install any packages.