I have an HM-10 BLE (v549 firmware) module with a PIN set. I want my phone to connect to it automatically. Is this possible with BLE modules?
The first time it is discovered, I click on it and, after entering the PIN, they are connected (as indicated by the LED that stopped blinking). Then if I turn off either the module or my phone's bluetooth and I turn them on again, nothing happens. The phone does not connect to the module, even if I click on it. I have to unpair from my device and repeat the process for a connection to be established.
How can I setup the HM-10 so that my phone will automatically connect to it whenever it is within range?
Thank you.
Android Bluetooth settings don't provide the option of making connection with auto connect feature. By default auto connect parameter is false. So what you can do is download the nrf connect app. App provides a feature of connect with autoConnecct.
Note: AutoConnect have few limitations:
Auto Connect will not work if you turned mobile bluetooth Off and then turn it On.
Auto Connect will not work if you destroy the app.
Related
I'm trying to establish a connection between my PC running Ubuntu and my iPhone via Bluetooth automatically when it becomes available, after being manually paired beforehand. I've seen this to be possible with certain peripherals, mainly audio. For example, my phone will automatically connect to a Bluetooth speaker when it is turned on and Bluetooth is active on my phone; another example is my phone automatically connects to my car's radio system via Bluetooth when I turn the car on.
I'm not able to connect my phone to my PC without first initiating the connection from the smartphone's Bluetooth menu. I'm thinking that I could possibly write an application for the PC to attempt to connect to the device every few minutes or something, but it seems that the phone needs to be the device to initiate the connection.
The only information that I need for what I'm trying to do ultimately is that the devices can pair successfully. Essentially I'm trying to build a sort of proximity trigger between my phone and my PC without using Wi-Fi and GPS - I can't use these for some specific reasons.
Is there any way to make this happen?
Yes this should be doable as long as you use the Background Processing feature for iOS apps. In the example I'll give below, we'll have the PC be the peripheral and the phone be the central, but you can really have it working either way. You will need to do the following:-
First initial connection needs to be performed in the foreground (this is due to iOS's background limitations).
On the iOS side, you need an application that acts as a central that scans and connects to the remove device (check this example as a starting point).
Upon connection, you need to bond with the PC. Bonding is important as it will prevent you from having to do the pairing again in the future. However, pairing/bonding is managed by the iPhone's OS so you cannot write it in your application, so the workaround is to have an encrypted characteristic on the PC side that will force the iPhone to bond (this is covered later).
On the PC side, you need to have a BlueZ script that acts as a peripheral that is always advertising. You can do this using bluetoothctl (check the examples here and here).
Before you start advertising, you need to have a GATT server on the PC side (to do this, check this example).
When registering characteristics, ensure that one of them has the encrypt-read property (you can find a full list of the properties here).
Now when you attempt to read this characteristic from the iOS side, the two devices should bond (make sure that your PC is bondable which you can do this via these commands).
Once the devices are paired, your iOS app needs to be working in the background constantly scanning and attempting to connect to the same peripheral (have a look at this and this example).
You can find more useful information at the links below:-
Getting started with Bluetooth Low Energy
The Ultimate Guide to CoreBluetooth Development
How to manage Bluetooth devices on Linux using bluetoothctl
I am trying to be able to click a button on a tablet i have, and it sends a message to a master Arduino. The master Arduino then sends a message of to 4 slave devices, which switches on a relay. So far I have already been able to connect a HC-05 to an android and switch a relay on from that same Arduino but, now i need to expand it. I have about 10 HC-05 modules and i would like to use just them. Any help will be appreciated. I currently have pinched parts of the code from this website.
http://www.instructables.com/id/Remotely-Control-LED-using-HC-05-Bluetooth-Arduino/?ALLSTEPS
Thanks
Ben
I recommend looking into AT commands for the HC-05. They will allow you to set the connected device and send information to that specific device (which would permit the switching between slaves). I also go through basic switching with the HC-05, a relay, and an Arduino Uno on my blog.
https://engineersportal.com/blog/2017/11/15/bluetooth-home-automation-light-bulb-switch-using-an-hc-05-a-relay-and-arduino
I am working on an application (windows phone 8.1), which is the following: if my phone is already connected to a bluetooth device then it should connect in parralel to another device which is already paired("cc2541"). I would appreciate a little help with the coding.
My problem is i don't know how to connect to a device automatically. I only found code samples that are only scans and lists devices and it only connects when I touch the screen ( approve the connectivity ).
You can get the RSSI value (signal strength) for each device, then you can implement a dispatcherTimer, where you start the scanning as the timer starts and then connect to the closest device on a timeout.
This is a basic example of automatic connection establishment.
I have been using bluetooth module BC 417 of company "NOVA".
I have kept all UART setting as suggested by datasheet.
i.e. buad rate=9600, parity=none, stop bit=1
My connection is getting established with nokia 5130 bluetooth, but as soon as m going to send something from UART connection is disabled.
Whenever i go to connect this module to android phone's bluetooth, connection does not take place.
For making connection i am using this command BC:CS=<address of bluetooth>
So i have following question:-
Is there any another setting is required in hyper terminal?
Is there any firmware is available for nova comm control interface module version 1.2?
Sorry, I only have enough reputation to answer and not just comment. You might want to try making sure that hardware flow control is switched on. It's a little difficult to know for sure as details of your set-up are so sketchy. Are you connecting this to an embedded micro and then trying to connect to a phone? What are you connecting hyper terminal to? Another phone or this Nova module?
my problem is the connection with a Bluetooth device. I have a Netbook with an integrated bluetooth device. I want to connect my netbook with an OBD-II interface and write a software to read out the stats of my car. To test the connection, I started by adding the OBD device via the bluetooth menu. The manager connects to the interface and it wants me to wait while the configurations are taking place. This state lasts "forever". After 60-Minutes of waiting, I closed the window. However, the device is shown in the list of available devices. Because I'm not able to switch the button to initiate the connection, I thought about using minicom (the OBD-II interface uses SPP for communicating).
As far as I did understand, I need an initiated connection with a bluetooth device and with it a virtual serial port to connect to with minicom. After reading some postings, I found out that the hcitool should be able to create the bluetooth session. With this I was able to connect to the device and the "connected" button turned on. Unfortunately it switches back after 2 secs.
hcitool scan is able to find the device
hcitool cc 00:11:22:33:44:55 is able to connect for the already mentioned 2 secs
hcitool con list the connection if it's called within 2 sec after initiating
I also tried to connect via a Windows PC using putty. Windows connected with the device without a problem and after that, I was able to send requests and get the appropriate answers. So it seems like the interface is working correctly.
I'm using Fedora 17 with gnome3. If you need any output or more information, please let me know.
Thanks in advance