I am running old linux software (kubuntu 8.04) on a number of systems and have to keep the main software for a while. It works fine on old systems, but now I have to install it on a new system, with new hardware.
I ran into problems with the network. The old system was Realtek RTL8111CP and now it is RTL81111E. The driver is r8169. I am trying to install an appropriate driver and hope that r8168-8.045.08 will work.
I am trying to compile it. I installed the packages build-essential and linux-header-generics, which I think are required.
When building I get lots of errors. Just as an example:
/home/donken/r8168-8.045.08/src/r8168.h:69: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’
I suppose there is a PATH missing or some packages. Any ideas?
Related
i had install AMDAPPSDK-3.0 for my laptop with intel i5 3rd generation configuration. i have no GPU other than my intel's processors inbuilt graphics card.
i had installed the SDK in the below way:
./AMD-APP-SDK-v3.0.130.136-GA-linux64.sh
my .bashrc file has:
**export LD_LIBRARY_PATH=/home/roadeo/AMDAPPSDK-3.0/lib/x86_64/
export AMDAPPSDKROOT="/home/roadeo/AMDAPPSDK-3.0"
export OPENCL_VENDOR_PATH="/home/roadeo/AMDAPPSDK-3.0/etc/OpenCL/vendors/"**
When i run clinfo to check whether OPENCL is installed properly or not. But i get this error:
**terminate called after throwing an instance of 'cl::Error'
what(): clGetPlatformIDs
Aborted core dumped.**
after googling i with frustration install fglrx using sudo apt-get. When i run clinfo i get a lot of details about opencl versions, vendor etc.. I don't know whether is it required or not.
What i m doing wrong kindly suggest.
I'm not familiar with AMD drivers on Linux, but it seems to me that installing the SDK only installed a bunch of examples, header files, etc. but did not actually install any OpenCL runtimes. Installing fglrx probably installed the CPU runtime, in which case the only device you'll see listed is your CPU. If you want to write OpenCL code for your GPU, you'll need to look at Beignet: https://freedesktop.org/wiki/Software/Beignet/
I need to install old kernel into Kali (Debian like) distro. I need to run program which requires older kernel.
I downloaded kernel but the installation gives me too many errors. I was reading similar topics and watch the videos, but so far I am not successful.
I do not have experience with kernels. Is there .deb package for kernels or any other easier way to do it?
Can I use such old kernel for this distribution?
Thank you
The 2.4.33 kernel is pretty old. According to Debian's packaging files installing that old a kernel doesn't seem to be doable in wheezy. Attempting to install and run an old kernel outside the packaging system is not going to to work. All the "modern" libraries and applications will be broken when running the 2.4 kernel, as will the program (you need more than just a kernel for your program). If it were me, I'd set up a virtualization environment like VirtualBox or something similar and pick an old distro like CentOS 3.9 or an older Debian release (sarge or later). If that's not an option, you could always try and port the program to a more recent kernel.
I have been working with Linux kernel, compiling and inserting modules, in my custom kernels. Previously I had Ubuntu where I had been working with my custom kernel and all the commands for compiling and installing kernel worked like a charm once I had installed all the required libraries.
Now I have switched over to Fedora 20, here I want to install my custom kernel and for that I downloaded all possible kernel tools, namely, Kernel Development Kernel Tools these are group installs and other libraries that I downloaded were ia32 libraries (as I am working on 64-bit OS), kernel-devel package. Still I am not able to work with make-kpkg command. It says bash: make-kpkg: command not found....
I googled out and did everything I could.
Can anyone get me out of this trouble?
make-kpkg is a Debian kernel packaging tool. It does not exist on RHEL family distributions, such as Fedora.
Please refer to the Fedora documentation page "Building a custom kernel" for the correct procedure. (I have not reproduced it here as it is rather long, and I'm not sure how far you may have gotten.)
The make-kpkg tool is part of the 'kernel-package' package on Debian systems. It is a Debian tool to produce debian package files. Ubuntu is based on Debian and has this tool. However, Fedora uses a different system to manage packages. So, make-kpkg would not be available on Fedora.
Yesterday, I compiled the 3.5 kernel in debian wheezy (testing), in a thinkpad edge S430 (i5). I did it following this blog, with all the default options. It seems succesful, but then, I tried to install the proprietary nvidia driver with m-a auto-install nvidia-kernel. The install is not able to proceed until the correct headers are installed. However, I have tried both manually to install linux-headers-3.5.0-18 and the linux-headers-amd64 package, but module assistant is not able to see them, showing the following message:
Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use.
There are other ways to install the driver, but I think that the problem with headers is broader.
Although I have been a Debian user for some years, I am far from being an expert, and I am not clear with the problems that I might face when compiling a 3.5 kernel on a Debian testing, so any help and explanation will be much appreciated.
First run
sudo m-a prepare
Getting source for kernel version: 3.8.5-ck1
Kernel headers available in /usr/src/linux-headers-3.8.5-ck1
Creating symlink..
Then do
sudo m-a a-i nvidia
and it should work.
Note that I did this on 3.8.5-ck1, but I built and installed that kernel in a similar fashion to how I wrote up the 3.5 build that you followed.
This is my first time compiling Linux kernel. I am using Debian Live. I used kernel-package to compile and I also added a new system call to return an arbitrary integer value greater than zero.
Everything went fine and I got both headers and image .deb files. When I tried to install them with dpkg, there was a warning that said I needed to configure LILO. I then aborted the installation and looked for LILO to find out that Debian Live got neither LILO nor GRUB. I installed GRUB, but it was not installed on my sda1 (USB disk running Debain Live), it said that it was not a proper block device. Debian Live uses squashfs (a file system).
Then, I ignored bootloader and installed the custom kernel. After I rebooted my computer, I was directly booted to the old Debain Live and my system call returns -1.
Please provide some solutions guys.
Thanks,
Debian Live is not a suitable base for you do to your own kernel development on. As you've found, it doesn't contain the tools needed to rebuild itself (that's not what its designed to do).
Install the regular Debian distribution (perhaps inside a virtualisation environment like VMWare Server or VirtualBox). Do your kernel development there.