This is an exam question (practice exam, not the real one). It's about concurrent programming using a multi-core processor and the problems with using locks.
"In concurrent programming is it possible that, by using locks, a program might sometimes use more processors than are necessary?"
In other words, is this ever possible? It's a true/false question. I can't find an answer anywhere and I'm revising for my exams.
The concurrent program with N threads of execution using locks at any point in time can have M=0 .. N-1 threads waiting for locks; thus this program can only be utilizing N-M processors since waiting for a lock does not require a processor.
Thus, no, using locks does not increase the number of processors required by a concurrent program.
With an efficient implementation of multi-threading and locks, if a thread blocks waiting for a lock for any significant time, the scheduler / lock implementation will reassign the core to do something else.
But since the exam question is asking if it is ever possible to use more processors than are strictly necessary, the answer is that it depends on the implementation of threads / locks / scheduling. For instance, there is a kind of lock called a spinlock where the lock implementation does NOT surrender control of the processor while waiting to acquire a lock. Instead, it polls the lock in a tight loop trying to acquire it.
Why would you do that? Well, if the lock is likely to become available in a short enough period of time, then the CPU wasted "spinning" on the lock is less than would be spent on performing a full context switch.
So I don't think your exam question has a simple yes / no answer.
I have a vector of entities. At update cycle I iterate through vector and update each entity: read it's position, calculate current speed, write updated position. Also, during updating process I can change some other objects in other part of program, but each that object related only to current entity and other entities will not touch that object.
So, I want to run this code in threads. I separate vector into few chunks and update each chunk in different threads. As I see, threads are fully independent. Each thread on each iteration works with independent memory regions and doesn't affect other threads work.
Do I need any locks here? I assume, that everything should work without any mutexes, etc. Am I right?
Short answer
No, you do not need any lock or synchronization mechanism as your problem appear to be a embarrassingly parallel task.
Longer answer
A race conditions that can only appear if two threads might access the same memory at the same time and at least one of the access is a write operation. If your program exposes this characteristic, then you need to make sure that threads access the memory in an ordered fashion. One way to do it is by using locks (it is not the only one though). Otherwise the result is UB.
It seems that you found a way to split the work among your threads s.t. each thread can work independently from the others. This is the best case scenario for concurrent programming as it does not require any synchronization. The complexity of the code is dramatically decreased and usually speedup will jump up.
Please note that as #acelent pointed out in the comment section, if you need changes made by one thread to be visible in another thread, then you might need some sort of synchronization due to the fact that depending on the memory model and on the HW changes made in one thread might not be immediately visible in the other.
This means that you might write from Thread 1 to a variable and after some time read the same memory from Thread 2 and still not being able to see the write made by Thread 1.
"I separate vector into few chunks and update each chunk in different threads" - in this case you do not need any lock or synchronization mechanism, however, the system performance might degrade considerably due to false sharing depending on how the chunks are allocated to threads. Note that the compiler may eliminate false sharing using thread-private temporal variables.
You can find plenty of information in books and wiki. Here is some info https://software.intel.com/en-us/articles/avoiding-and-identifying-false-sharing-among-threads
Also there is a stackoverflow post here does false sharing occur when data is read in openmp?
I've been reading about semaphores and came across this article:
www.csc.villanova.edu/~mdamian/threads/posixsem.html
So, this page states that if there are two threads accessing the same data, things can get ugly. The solution is to allow only one thread to access the data at the same time.
This is clear and I understand the solution, only why would anyone need threads to do this? What is the point? If the threads are blocked so that only one can execute, why use them at all? There is no advantage. (or maybe this is a just a dumb example; in such a case please point me to a sensible one)
Thanks in advance.
Consider this:
void update_shared_variable() {
sem_wait( &g_shared_variable_mutex );
g_shared_variable++;
sem_post( &g_shared_variable_mutex );
}
void thread1() {
do_thing_1a();
do_thing_1b();
do_thing_1c();
update_shared_variable(); // may block
}
void thread2() {
do_thing_2a();
do_thing_2b();
do_thing_2c();
update_shared_variable(); // may block
}
Note that all of the do_thing_xx functions still happen simultaneously. The semaphore only comes into play when the threads need to modify some shared (global) state or use some shared resource. So a thread will only block if another thread is trying to access the shared thing at the same time.
Now, if the only thing your threads are doing is working with one single shared variable/resource, then you are correct - there is no point in having threads at all (it would actually be less efficient than just one thread, due to context switching.)
When you are using multithreading not everycode that runs will be blocking. For example, if you had a queue, and two threads are reading from that queue, you would make sure that no thread reads at the same time from the queue, so that part would be blocking, but that's the part that will probably take the less time. Once you have retrieved the item to process from the queue, all the rest of the code can be run asynchronously.
The idea behind the threads is to allow simultaneous processing. A shared resource must be governed to avoid things like deadlocks or starvation. If something can take a while to process, then why not create multiple instances of those processes to allow them to finish faster? The bottleneck is just what you mentioned, when a process has to wait for I/O.
Being blocked while waiting for the shared resource is small when compared to the processing time, this is when you want to use multiple threads.
This is of course a SSCCE (Short, Self Contained, Correct Example)
Let's say you have 2 worker threads that do a lot of work and write the result to a file.
you only need to lock the file (shared resource) access.
The problem with trivial examples....
If the problem you're trying to solve can be broken down into pieces that can be executed in parallel then threads are a good thing.
A slightly less trivial example - imagine a for loop where the data being processed in each iteration is different every time. In that circumstance you could execute each iteration of the for loop simultaneously in separate threads. And indeed some compilers like Intel's will convert suitable for loops to threads automatically for you. In that particular circumstances no semaphores are needed because of the iterations' data independence.
But say you were wanting to process a stream of data, and that processing had two distinct steps, A and B. The threadless approach would involve reading in some data then doing A then B and then output the data before reading more input. Or you could have a thread reading and doing A, another thread doing B and output. So how do you get the interim result from the first thread to the second?
One way would be to have a memory buffer to contain the interim result. The first thread could write the interim result to a memory buffer and the second could read from it. But with two threads operating independently there's no way for the first thread to know if it's safe to overwrite that buffer, and there's no way for the second to know when to read from it.
That's where you can use semaphores to synchronise the action of the two threads. The first thread takes a semaphore that I'll call empty, fills the buffer, and then posts a semaphore called filled. Meanwhile the second thread will take the filled semaphore, read the buffer, and then post empty. So long as filled is initialised to 0 and empty is initialised to 1 it will work. The second thread will process the data only after the first has written it, and the first won't write it until the second has finished with it.
It's only worth it of course if the amount of time each thread spends processing data outweighs the amount of time spent waiting for semaphores. This limits the extent to which splitting code up into threads yields a benefit. Going beyond that tends to mean that the overall execution is effectively serial.
You can do multithreaded programming without semaphores at all. There's the Actor model or Communicating Sequential Processes (the one I favour). It's well worth looking up JCSP on Wikipedia.
In these programming styles data is shared between threads by sending it down communication channels. So instead of using semaphores to grant another thread access to data it would be sent a copy of that data down something a bit like a network socket, or a pipe. The advantage of CSP (which limits that communication channel to send-finishes-only-if-receiver-has-read) is that it stops you falling into the many many pitfalls that plague multithreaded do programs. It sounds inefficient (copying data is inefficient), but actually it's not so bad with Intel's QPI architecture, AMD's Hypertransport. And it means hat the 'channel' really could be a network connection; scalability built in by design.
I am new to linux and linux threads. I have spent some time googling to try to understand the differences between all the functions available for thread synchronization. I still have some questions.
I have found all of these different types of synchronizations, each with a number of functions for locking, unlocking, testing the lock, etc.
gcc atomic operations
futexes
mutexes
spinlocks
seqlocks
rculocks
conditions
semaphores
My current (but probably flawed) understanding is this:
semaphores are process wide, involve the filesystem (virtually I assume), and are probably the slowest.
Futexes might be the base locking mechanism used by mutexes, spinlocks, seqlocks, and rculocks. Futexes might be faster than the locking mechanisms that are based on them.
Spinlocks dont block and thus avoid context swtiches. However they avoid the context switch at the expense of consuming all the cycles on a CPU until the lock is released (spinning). They should only should be used on multi processor systems for obvious reasons. Never sleep in a spinlock.
The seq lock just tells you when you finished your work if a writer changed the data the work was based on. You have to go back and repeat the work in this case.
Atomic operations are the fastest synch call, and probably are used in all the above locking mechanisms. You do not want to use atomic operations on all the fields in your shared data. You want to use a lock (mutex, futex, spin, seq, rcu) or a single atomic opertation on a lock flag when you are accessing multiple data fields.
My questions go like this:
Am I right so far with my assumptions?
Does anyone know the cpu cycle cost of the various options? I am adding parallelism to the app so we can get better wall time response at the expense of running fewer app instances per box. Performances is the utmost consideration. I don't want to consume cpu with context switching, spinning, or lots of extra cpu cycles to read and write shared memory. I am absolutely concerned with number of cpu cycles consumed.
Which (if any) of the locks prevent interruption of a thread by the scheduler or interrupt...or am I just an idiot and all synchonization mechanisms do this. What kinds of interruption are prevented? Can I block all threads or threads just on the locking thread's CPU? This question stems from my fear of interrupting a thread holding a lock for a very commonly used function. I expect that the scheduler might schedule any number of other workers who will likely run into this function and then block because it was locked. A lot of context switching would be wasted until the thread with the lock gets rescheduled and finishes. I can re-write this function to minimize lock time, but still it is so commonly called I would like to use a lock that prevents interruption...across all processors.
I am writing user code...so I get software interrupts, not hardware ones...right? I should stay away from any functions (spin/seq locks) that have the word "irq" in them.
Which locks are for writing kernel or driver code and which are meant for user mode?
Does anyone think using an atomic operation to have multiple threads move through a linked list is nuts? I am thinking to atomicly change the current item pointer to the next item in the list. If the attempt works, then the thread can safely use the data the current item pointed to before it was moved. Other threads would now be moved along the list.
futexes? Any reason to use them instead of mutexes?
Is there a better way than using a condition to sleep a thread when there is no work?
When using gcc atomic ops, specifically the test_and_set, can I get a performance increase by doing a non atomic test first and then using test_and_set to confirm? I know this will be case specific, so here is the case. There is a large collection of work items, say thousands. Each work item has a flag that is initialized to 0. When a thread has exclusive access to the work item, the flag will be one. There will be lots of worker threads. Any time a thread is looking for work, they can non atomicly test for 1. If they read a 1, we know for certain that the work is unavailable. If they read a zero, they need to perform the atomic test_and_set to confirm. So if the atomic test_and_set is 500 cpu cycles because it is disabling pipelining, causes cpu's to communicate and L2 caches to flush/fill .... and a simple test is 1 cycle .... then as long as I had a better ratio of 500 to 1 when it came to stumbling upon already completed work items....this would be a win.
I hope to use mutexes or spinlocks to sparilngly protect sections of code that I want only one thread on the SYSTEM (not jsut the CPU) to access at a time. I hope to sparingly use gcc atomic ops to select work and minimize use of mutexes and spinlocks. For instance: a flag in a work item can be checked to see if a thread has worked it (0=no, 1=yes or in progress). A simple test_and_set tells the thread if it has work or needs to move on. I hope to use conditions to wake up threads when there is work.
Thanks!
Application code should probably use posix thread functions. I assume you have man pages so type
man pthread_mutex_init
man pthread_rwlock_init
man pthread_spin_init
Read up on them and the functions that operate on them to figure out what you need.
If you're doing kernel mode programming then it's a different story. You'll need to have a feel for what you are doing, how long it takes, and what context it gets called in to have any idea what you need to use.
Thanks to all who answered. We resorted to using gcc atomic operations to synchronize all of our threads. The atomic ops were about 2x slower than setting a value without synchronization, but magnitudes faster than locking a mutex, changeing the value, and then unlocking the mutex (this becomes super slow when you start having threads bang into the locks...) We only use pthread_create, attr, cancel, and kill. We use pthread_kill to signal threads to wake up that we put to sleep. This method is 40x faster than cond_wait. So basicly....use pthreads_mutexes if you have time to waste.
in addtion you should check the nexts books
Pthreads Programming: A POSIX
Standard for Better Multiprocessing
and
Programming with POSIX(R) Threads
regarding question # 8
Is there a better way than using a condition to sleep a thread when there is no work?
yes i think that the best aproach instead of using sleep
is using function like sem_post() and sem_wait of "semaphore.h"
regards
A note on futexes - they are more descriptively called fast userspace mutexes. With a futex, the kernel is involved only when arbitration is required, which is what provides the speed up and savings.
Implementing a futex can be extremely tricky (PDF), debugging them can lead to madness. Unless you really, really, really need the speed, its usually best to use the pthread mutex implementation.
Synchronization is never exactly easy, but trying to implement your own in userspace makes it inordinately difficult.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
I am applying my new found knowledge of threading everywhere and getting lots of surprises
Example:
I used threads to add numbers in an
array. And outcome was different every
time. The problem was that all of my
threads were updating the same
variable and were not synchronized.
What are some known thread issues?
What care should be taken while using
threads?
What are good multithreading resources.
Please provide examples.
sidenote:(I renamed my program thread_add.java to thread_random_number_generator.java:-)
In a multithreading environment you have to take care of synchronization so two threads doesn't clobber the state by simultaneously performing modifications. Otherwise you can have race conditions in your code (for an example see the infamous Therac-25 accident.) You also have to schedule the threads to perform various tasks. You then have to make sure that your synchronization and scheduling doesn't cause a deadlock where multiple threads will wait for each other indefinitely.
Synchronization
Something as simple as increasing a counter requires synchronization:
counter += 1;
Assume this sequence of events:
counter is initialized to 0
thread A retrieves counter from memory to cpu (0)
context switch
thread B retrieves counter from memory to cpu (0)
thread B increases counter on cpu
thread B writes back counter from cpu to memory (1)
context switch
thread A increases counter on cpu
thread A writes back counter from cpu to memory (1)
At this point the counter is 1, but both threads did try to increase it. Access to the counter has to be synchronized by some kind of locking mechanism:
lock (myLock) {
counter += 1;
}
Only one thread is allowed to execute the code inside the locked block. Two threads executing this code might result in this sequence of events:
counter is initialized to 0
thread A acquires myLock
context switch
thread B tries to acquire myLock but has to wait
context switch
thread A retrieves counter from memory to cpu (0)
thread A increases counter on cpu
thread A writes back counter from cpu to memory (1)
thread A releases myLock
context switch
thread B acquires myLock
thread B retrieves counter from memory to cpu (1)
thread B increases counter on cpu
thread B writes back counter from cpu to memory (2)
thread B releases myLock
At this point counter is 2.
Scheduling
Scheduling is another form of synchronization and you have to you use thread synchronization mechanisms like events, semaphores, message passing etc. to start and stop threads. Here is a simplified example in C#:
AutoResetEvent taskEvent = new AutoResetEvent(false);
Task task;
// Called by the main thread.
public void StartTask(Task task) {
this.task = task;
// Signal the worker thread to perform the task.
this.taskEvent.Set();
// Return and let the task execute on another thread.
}
// Called by the worker thread.
void ThreadProc() {
while (true) {
// Wait for the event to become signaled.
this.taskEvent.WaitOne();
// Perform the task.
}
}
You will notice that access to this.task probably isn't synchronized correctly, that the worker thread isn't able to return results back to the main thread, and that there is no way to signal the worker thread to terminate. All this can be corrected in a more elaborate example.
Deadlock
A common example of deadlock is when you have two locks and you are not careful how you acquire them. At one point you acquire lock1 before lock2:
public void f() {
lock (lock1) {
lock (lock2) {
// Do something
}
}
}
At another point you acquire lock2 before lock1:
public void g() {
lock (lock2) {
lock (lock1) {
// Do something else
}
}
}
Let's see how this might deadlock:
thread A calls f
thread A acquires lock1
context switch
thread B calls g
thread B acquires lock2
thread B tries to acquire lock1 but has to wait
context switch
thread A tries to acquire lock2 but has to wait
context switch
At this point thread A and B are waiting for each other and are deadlocked.
There are two kinds of people that do not use multi threading.
1) Those that do not understand the concept and have no clue how to program it.
2) Those that completely understand the concept and know how difficult it is to get it right.
I'd make a very blatant statement:
DON'T use shared memory.
DO use message passing.
As a general advice, try to limit the amount of shared state and prefer more event-driven architectures.
I can't give you examples besides pointing you at Google. Search for threading basics, thread synchronisation and you'll get more hits than you know.
The basic problem with threading is that threads don't know about each other - so they will happily tread on each others toes, like 2 people trying to get through 1 door, sometimes they will pass though one after the other, but sometimes they will both try to get through at the same time and will get stuck. This is difficult to reproduce, difficult to debug, and sometimes causes problems. If you have threads and see "random" failures, this is probably the problem.
So care needs to be taken with shared resources. If you and your friend want a coffee, but there's only 1 spoon you cannot both use it at the same time, one of you will have to wait for the other. The technique used to 'synchronise' this access to the shared spoon is locking. You make sure you get a lock on the shared resource before you use it, and let go of it afterwards. If someone else has the lock, you wait until they release it.
Next problem comes with those locks, sometimes you can have a program that is complex, so much that you get a lock, do something else then access another resource and try to get a lock for that - but some other thread has that 2nd resource, so you sit and wait... but if that 2nd thread is waiting for the lock you hold for the 1st resource.. it's going to sit and wait. And your app just sits there. This is called deadlock, 2 threads both waiting for each other.
Those 2 are the vast majority of thread issues. The answer is generally to lock for as short a time as possible, and only hold 1 lock at a time.
I notice you are writing in java and that nobody else mentioned books so Java Concurrency In Practice should be your multi-threaded bible.
-- What are some known thread issues? --
Race conditions.
Deadlocks.
Livelocks.
Thread starvation.
-- What care should be taken while using threads? --
Using multi-threading on a single-processor machine to process multiple tasks where each task takes approximately the same time isn’t always very effective.For example, you might decide to spawn ten threads within your program in order to process ten separate tasks. If each task takes approximately 1 minute to process, and you use ten threads to do this processing, you won’t have access to any of the task results for the whole 10 minutes. If instead you processed the same tasks using just a single thread, you would see the first result in 1 minute, the next result 1 minute later, and so on. If you can make use of each result without having to rely on all of the results being ready simultaneously, the single
thread might be the better way of implementing the program.
If you launch a large number of threads within a process, the overhead of thread housekeeping and context switching can become significant. The processor will spend considerable time in switching between threads, and many of the threads won’t be able to make progress. In addition, a single process with a large number of threads means that threads in other processes will be scheduled less frequently and won’t receive a reasonable share of processor time.
If multiple threads have to share many of the same resources, you’re unlikely to see performance benefits from multi-threading your application. Many developers see multi-threading as some sort of magic wand that gives automatic performance benefits. Unfortunately multi-threading isn’t the magic wand that it’s sometimes perceived to be. If you’re using multi-threading for performance reasons, you should measure your application’s performance very closely in several different situations, rather than just relying on some non-existent magic.
Coordinating thread access to common data can be a big performance killer. Achieving good performance with multiple threads isn’t easy when using a coarse locking plan, because this leads to low concurrency and threads waiting for access. Alternatively, a fine-grained locking strategy increases the complexity and can also slow down performance unless you perform some sophisticated tuning.
Using multiple threads to exploit a machine with multiple processors sounds like a good idea in theory, but in practice you need to be careful. To gain any significant performance benefits, you might need to get to grips with thread balancing.
-- Please provide examples. --
For example, imagine an application that receives incoming price information from
the network, aggregates and sorts that information, and then displays the results
on the screen for the end user.
With a dual-core machine, it makes sense to split the task into, say, three threads. The first thread deals with storing the incoming price information, the second thread processes the prices, and the final thread handles the display of the results.
After implementing this solution, suppose you find that the price processing is by far the longest stage, so you decide to rewrite that thread’s code to improve its performance by a factor of three. Unfortunately, this performance benefit in a single thread may not be reflected across your whole application. This is because the other two threads may not be able to keep pace with the improved thread. If the user interface thread is unable to keep up with the faster flow of processed information, the other threads now have to wait around for the new bottleneck in the system.
And yes, this example comes directly from my own experience :-)
DONT use global variables
DONT use many locks (at best none at all - though practically impossible)
DONT try to be a hero, implementing sophisticated difficult MT protocols
DO use simple paradigms. I.e share the processing of an array to n slices of the same size - where n should be equal to the number of processors
DO test your code on different machines (using one, two, many processors)
DO use atomic operations (such as InterlockedIncrement() and the like)
YAGNI
The most important thing to remember is: do you really need multithreading?
I agree with pretty much all the answers so far.
A good coding strategy is to minimise or eliminate the amount of data that is shared between threads as much as humanly possible. You can do this by:
Using thread-static variables (although don't go overboard on this, it will eat more memory per thread, depending on your O/S).
Packaging up all state used by each thread into a class, then guaranteeing that each thread gets exactly one state class instance to itself. Think of this as "roll your own thread-static", but with more control over the process.
Marshalling data by value between threads instead of sharing the same data. Either make your data transfer classes immutable, or guarantee that all cross-thread calls are synchronous, or both.
Try not to have multiple threads competing for the exact same I/O "resource", whether it's a disk file, a database table, a web service call, or whatever. This will cause contention as multiple threads fight over the same resource.
Here's an extremely contrived OTT example. In a real app you would cap the number of threads to reduce scheduling overhead:
All UI - one thread.
Background calcs - one thread.
Logging errors to a disk file - one thread.
Calling a web service - one thread per unique physical host.
Querying the database - one thread per independent group of tables that need updating.
Rather than guessing how to do divvy up the tasks, profile your app and isolate those bits that are (a) very slow, and (b) could be done asynchronously. Those are good candidates for a separate thread.
And here's what you should avoid:
Calcs, database hits, service calls, etc - all in one thread, but spun up multiple times "to improve performance".
Don't start new threads unless you really need to. Starting threads is not cheap and for short running tasks starting the thread may actually take more time than executing the task itself. If you're on .NET take a look at the built in thread pool, which is useful in a lot of (but not all) cases. By reusing the threads the cost of starting threads is reduced.
EDIT: A few notes on creating threads vs. using thread pool (.NET specific)
Generally try to use the thread pool. Exceptions:
Long running CPU bound tasks and blocking tasks are not ideal run on the thread pool cause they will force the pool to create additional threads.
All thread pool threads are background threads, so if you need your thread to be foreground, you have to start it yourself.
If you need a thread with different priority.
If your thread needs more (or less) than the standard 1 MB stack space.
If you need to be able to control the life time of the thread.
If you need different behavior for creating threads than that offered by the thread pool (e.g. the pool will throttle creating of new threads, which may or may not be what you want).
There are probably more exceptions and I am not claiming that this is the definitive answer. It is just what I could think of atm.
I am applying my new found knowledge of threading everywhere
[Emphasis added]
DO remember that a little knowledge is dangerous. Knowing the threading API of your platform is the easy bit. Knowing why and when you need to use synchronisation is the hard part. Reading up on "deadlocks", "race-conditions", "priority inversion" will start you in understanding why.
The details of when to use synchronisation are both simple (shared data needs synchronisation) and complex (atomic data types used in the right way don't need synchronisation, which data is really shared): a lifetime of learning and very solution specific.
An important thing to take care of (with multiple cores and CPUs) is cache coherency.
I am surprised that no one has pointed out Herb Sutter's Effective Concurrency columns yet. In my opinion, this is a must read if you want to go anywhere near threads.
a) Always make only 1 thread responsible for a resource's lifetime. That way thread A won't delete a resource thread B needs - if B has ownership of the resource
b) Expect the unexpected
DO think about how you will test your code and set aside plenty of time for this. Unit tests become more complicated. You may not be able to manually test your code - at least not reliably.
DO think about thread lifetime and how threads will exit. Don't kill threads. Provide a mechanism so that they exit gracefully.
DO add some kind of debug logging to your code - so that you can see that your threads are behaving correctly both in development and in production when things break down.
DO use a good library for handling threading rather than rolling your own solution (if you can). E.g. java.util.concurrency
DON'T assume a shared resource is thread safe.
DON'T DO IT. E.g. use an application container that can take care of threading issues for you. Use messaging.
In .Net one thing that surprised me when I started trying to get into multi-threading is that you cannot straightforwardly update the UI controls from any thread other than the thread that the UI controls were created on.
There is a way around this, which is to use the Control.Invoke method to update the control on the other thread, but it is not 100% obvious the first time around!
Don't be fooled into thinking you understand the difficulties of concurrency until you've split your head into a real project.
All the examples of deadlocks, livelocks, synchronization, etc, seem simple, and they are. But they will mislead you, because the "difficulty" in implementing concurrency that everyone is talking about is when it is used in a real project, where you don't control everything.
While your initial differences in sums of numbers are, as several respondents have pointed out, likely to be the result of lack of synchronisation, if you get deeper into the topic, be aware that, in general, you will not be able to reproduce exactly the numeric results you get on a serial program with those from a parallel version of the same program. Floating-point arithmetic is not strictly commutative, associative, or distributive; heck, it's not even closed.
And I'd beg to differ with what, I think, is the majority opinion here. If you are writing multi-threaded programs for a desktop with one or more multi-core CPUs, then you are working on a shared-memory computer and should tackle shared-memory programming. Java has all the features to do this.
Without knowing a lot more about the type of problem you are tackling, I'd hesitate to write that 'you should do this' or 'you should not do that'.