I am getting the following error while creating a new Angular project using Angular CLI.
ng new <project-name>
npm WARN registry Unexpected warning for http://registry.npmjs.org/: Miscellaneous Warning ECONNRESET: request to http://registry.npmjs.org/#types%2fjasmine failed, reason: socket hang up
npm WARN registry Using stale package data from http://registry.npmjs.org/ due to a request error during revalidation.
npm ERR! code ECONNRESET
npm ERR! errno ECONNRESET
npm ERR! network request to http://registry.npmjs.org/jsesc failed, reason: socket hang up
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'
npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2018-01-23T15_11_33_289Z-debug.log
Package install failed, see above.
Package install failed, see above.
This could be because I am behind a corporate proxy. So I tried editing npm config file.
I used npm config set proxy http://proxyhostname:proxyport and npm config set https-proxy http://proxyhostname:proxyport.
But still, I was facing the same issue. When I opened the npm config file using npm config edit, I realised that the above commands for proxy settings are just adding two lines at the top of the npm config file but below it still has proxy=null and https-proxy=null. So I tried editing the file manually. Changed proxy=null to proxy=http://proxyhostname:proxyport and https-proxy=null to https-proxy=http://proxyhostname:proxyport. I didn't get any error while saving it but when I opened the file again with npm config edit I see that my manual changes are not present. Is there any step that I am missing to manually change the npm config file? Also, suggest if there is a different solution to the problem (mentioned above) I am facing.
Go to the terminal and write:
npm config edit
Then edit these lines, (adding comments with ";"):
;proxy=http://proxyhostname:proxyport
;https-proxy=http://proxyhostname:proxyport
I think - your default editor is vi, just type :wq and press Enter(As you can see at the screen below), this command will save the file and exit from editor.
Related
I am working on a server that has access to the Internet through a proxy. I can't neither access proxy configuration nor change it.
These are the options of .npmrc :
https-proxy = "https://10.1.0.254:8080/"
proxy = "http://10.1.0.254:8080/"
strict-ssl = false
When I try to download a package I get this error prompt :
npm ERR! code EPROTO
npm ERR! syscall write
npm ERR! errno EPROTO
npm ERR! request to https://registry.npmjs.org/bower failed, reason: write EPROTO 139954307135424:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:332:
npm ERR!
npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2023-02-15T15_26_16_616Z-debug-0.log
I have access to https://registry.npmjs.org/ with a web browser through this proxy and the server can resolve the name. I mention that APT works perfectly.
I'm running out of ideas on how to get this working. Any ideas ?
I tried to remove .npmrc configuration and to rely only on system proxy definition. I tried to update npm and also to find other occurence of this problem here.
Don't remove the .npmrc, try to add this:
ssl-protocol=TLSv1.2
Or Alternatively try using a different registry by adding the following line to your .npmrc file::
registry=http://registry.npmjs.org/
Installing packages (npm)...npm ERR! code ERR_SOCKET_TIMEOUT
npm ERR! errno ERR_SOCKET_TIMEOUT
npm ERR! network Invalid response body while trying to fetch https://registry.npmjs.org/#babel%2fplugin-proposal-nullish-coalescing-operator: Socket timeout
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\faizan\AppData\Local\npm-cache_logs\2021-12-07T00_42_46_255Z-debug-0.log
× Package install failed, see above.
The Schematic workflow failed. See above.
This scenario sounds like you may have a slow internet connection.
I solved my this error like SS
in the following way:
Try increasing the timeout from 60s to 90s by adding this to your .npmrc file:
You need create .npmrc file if you do not have it
C:\Users{username}.npmrc (for Windows)
~/.npmrc (for Linux/Mac)
timeout=60000
And you could also try adding if you have a slow internet connection or want to save bandwidth
prefer-offline=true
Or you can create/update one in the same directory as the project's package.json file as well.
when i trying to install express or any npm packeges getting this type of error(without proxy)(node -v 10.14.2)(npm -v 6.4.1)
npm ERR! code ETIMEDOUT
npm ERR! errno ETIMEDOUT
npm ERR! network request to http://registry.npmjs.org/express/express failed, reason: connect ETIMEDOUT 104.16.21.35:80
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\ankit\AppData\Roaming\npm-cache\_logs\2020-10-20T15_26_19_314Z-debug.log
please help me, thank you in advance.
I had this problem today and after doing some research this is what I did.
Inside my Users/name it is a file call .nmprc. I open it (as a text editor) and there was a proxy that I try to set. something like this:
proxy=http://yourorganizationproxy.com:8080
https-proxy=http://yourorganizationproxy.com:8080
So I decided to delete both of then an save the file.
I tried again to execute npx create-react-app my-app and it worked.
Hope this works for you too!
if you can't locate .nmprc file. You can try and use
npm config delete proxy
inside your terminal
then try again:
npx create-react-app my-app
Hope it work for you too!
I have experienced the same problem before and since I did not need a proxy I deleted the .npmrc file in the User/name directory.
I hope it works
Delete the content of .nmprc file resolves the issue.
C:\Users\\.nmprc
Trying to run npm install -g "something". But I'm getting this error.
I'm working on Windows 7:
npm ERR! code ENOTFOUND
npm ERR! errno ENOTFOUND
npm ERR! network request to https://registry.npmjs.org/yarn failed, reason:
getaddrinfo ENOTFOUND example.com example.com:8080
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network
settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\User\AppData\Roaming\npm-cache\_logs\2019-03-
01T13_13_42_425Z-debug.log
I see the file content when I open this URL on Chrome https://registry.npmjs.org/yarn
Can anyone help me to resolve this?
After a lot of research finally I found how to solve this issue.
From start I was trying to remove the proxy with npm
npm config rm proxy
npm config rm https-proxy
But for some reason it wasn't successful.
I found the proxy urls in this file
C:\Users\User\.npmrc
https-proxy=http://example.com:8080
proxy=http://example.com:8080/
Removing these manually solved the issue and I was able to install any app with npm.
Mostly (and for me as well) this error is due to incorrect proxy settings. Verify network proxy settings are correct.
Else try removing proxy settings using below commands and try again.
Console
$ npm config rm proxy
$ npm config rm https-proxy
i am trying to install nativescript, i am new to it so i'll appreciate any help..
first , i installed it correctly but after that i saw a page on nativescript site for advanced installation, so i played around with it .. now i cannot run the command tns and cannot uninstall, can`t install..
here is the errors i get:
note: I also updated my nodejs to the newest version , but couldnt update npm , when i tried to run: npm install npm -g i got errors like here:
i also tried rebooting the pc but didn`t help.
i uninstalled node, npm then installed them again .. now i get this error :
ERR! network getaddrinfo ENOTFOUND registry.npmjs.org registry.npmjs.org:443
ERR! network This is most likely not a problem with npm itself
ERR! network and is related to network connectivity.
ERR! network In most cases you are behind a proxy or have bad network settings.
ERR! network
ERR! network If you are behind a proxy, please make sure that the
ERR! network 'proxy' config is set properly. See: 'npm help config'
ERR! Please include the following file with any support request:
ERR! C:\Users\Home\npm-debug.log
It was a connection problem.
I remember thatI played with proxy configuration by mistake like this :
npm config set proxy http://localhost:8080/
npm config set https-proxy http://localhost:8080/
npm config set strict-ssl false
which made npm client attempts to hit localhost:8080 to pull the module rather than the correct internet endpoint.
so after couple of days of frustration i visited this link
https://docs.npmjs.com/cli/config
then run
npm config edit
which opened a file inside that file i removed those three lines i added above , then everything worked fine.