I have a script that watches a directory (recursively) and performs a command when a file changes. This is working correctly when the monitoring flag is used as below:
#!/bin/sh
inotifywait -m -r /path/to/directory |
while read path action file; do
if [ <perform a check> ]
then
my_command
fi
done
However, I want to run this on startup and in the background, so naïvely thought I could change the -m flag to -d (run inotifywait as daemon, and include an --outfile location) and then add this to rc.local to have this run at startup. Where am I going wrong?
Well .... with -d it backgrounds itself and outputs ONLY to outfile, so your whole pipe & loop construct is moot, and it never sees any data.
Incron is a cron-like daemon for inotify events.
Just need to use incrontab and an entry for your task:
/path/to/directory IN_ALL_EVENTS /usr/local/bin/my-script $# $# $%
And /local/bin/my-script would be:
#! /bin/bash
local path=$1
local action=$2
local file=$3
if [ <perform a check> ]
then
my_command
fi
You need to add a single & to the end of command in your /etc/rc.local
Putting a single & at the end of a command means Run this program in the background so the user can still have input.
Related
I logged in a virtual machine via ssh and I tried to run a script in background, the script is shown below:
#!/bin/bash
APP_NAME=`basename $0`
CFG_FILE=$1
. $CFG_FILE #just some variables
CMD=$2
PID_FILE="$PIDS_DIR/$APP_NAME.pid"
CUR_LOG_DIR=$LOGS_RUNNING
echo $$ > $PID_FILE
#Main script code
#This script shall be called using the following syntax
# $ nohup script_name output_dir &
TIMESTAMP=`date +"%Y%m%d%H%M%S"`
CAP_INTERFACE="eth0"
/usr/sbin/tcpdump -nei $CAP_INTERFACE -s 65535 -w file_result
rm $PID_FILE
The result should be tcpdump running in background, redirecting the command result to file_result.
The script is called with:
nohup $SCRIPT_NAME $CFG_FILE start &
And It is stopped calling the STOP_SCRIPT:
##STOP_SCRIPT
PID_FILE="$PIDS_DIR/$APP_NAME.pid"
if [ -f $PID_FILE ]
then
PID=`cat $PID_FILE`
# send SIGTERM to kill all children of $PID
pkill -TERM -P $PID
fi
When I check the file_result, after running the stop script, It is empty.
What is happening? How can I solve it?
I found this link: https://it.toolbox.com/question/launching-tcpdump-processes-in-background-using-ssh-060614
The author seems to have faced a similar issue. They debate about race conditions, but I didn't understand completely.
I'm not sure what you're trying to accomplish by having the startup script itself continue to run, but here's an approach that I think accomplishes what you're trying to do, namely start tcpdump and have it continue to run immune to hangups via nohup. I've simplified things a bit for illustrative purposes - feel free to add any variables back as you see fit, such as the nohup.out output directory, TIMESTAMP, etc.
Script #1: tcpdump_start.sh
#!/bin/sh
rm -f nohup.out
nohup /usr/sbin/tcpdump -ni eth0 -s 65535 -w file_result.pcap &
# Write tcpdump's PID to a file
echo $! > /var/run/tcpdump.pid
Script #2: tcpdump_stop.sh
#!/bin/sh
if [ -f /var/run/tcpdump.pid ]
then
kill `cat /var/run/tcpdump.pid`
echo tcpdump `cat /var/run/tcpdump.pid` killed.
rm -f /var/run/tcpdump.pid
else
echo tcpdump not running.
fi
To start tcpdump, just run tcpdump_start.sh.
To stop the tcpdump instance started with tcpdump_start.sh, just run tcpdump_stop.sh.
The captured packets will be written to the file_result.pcap file, and yes, it's a pcap file, not a text file, so it helps to name it with the proper file extension. The tcpdump statistics will be written to the nohup.out file when tcpdump is terminated.
I too had faced problems when running tcpdump over an SSH session.
In my case, I was running
sudo nohup tcpdump -w {pcap_dump_file} {filter} > /dev/null 2>&1 &
Where, running this command over Paramiko SSH session as a background process was the problem.
To get around this, I used screen utility of Linux.
screen is an easy to use tool for long-running of processes as a service.
Might be an old post, but this is also relevant. I couldn;t understand why no file was being created only to realise that the file might not be created until a certain amount of data had been captured.
https://github.com/the-tcpdump-group/tcpdump/issues/485
I am currently using the following command to run reboot
sudo shutdown -r now
however, I would need to run it for 5 loops before and after executing some other programs. Was wondering if it is possible to do it in MINT environment?
First a disclaimer: I haven't tried this because I don't want to reboot my machine right now...
Anyway, the idea is to make a script that can track it's iteration progress to a file as #david-c-rankin suggested. This bash script could look like this (I did test this):
#!/bin/sh
ITERATIONS="5"
TRACKING_FILE="/path/to/bootloop.txt"
touch "$TRACKING_FILE"
N=$(cat "$TRACKING_FILE" | wc -c)
if [ "$N" -lt "$ITERATIONS" ]; then
printf "." >> "$TRACKING_FILE"
echo "rebooting (iteration $N)"
# TODO: this is where you put the reboot command
# and anything you want to run before rebooting each time
else
rm "$TRACKING_FILE"
# TODO: other commands to resume anything required
fi
Then add a call to this script somewhere where it will be run on boot. eg. cron (#reboot) or systemd. Don't forget to remove it from a startup/boot command when you're finished or next time you reboot, it will reboot N times.
Not sure exactly how you are planning on using it, but the general workflow would look like:
save script to /path/to/reboot_five_times.sh
add script to run on boot (cron, etc.)
do stuff (manually or in a script)
call the script
computer reboots 5 times
anything in the second TODO section of the script is then run
go back to step 3, or if finished remove from cron/systemd so it won't reboot when you don't want it to.
First create a text document wherever you want,I created one on Desktop,
Then use this file as a physical counter and write a daemon file to run things at startup
For example:
#!/bin/sh
var=$(cat a.txt)
echo "$var"
if [ "$var" != 5 ]
then
var=$((var+1))
echo "$var" > a.txt
echo "restart here"
sudo shutdown -r now
else
echo "stop restart"
echo 0 > a.txt
fi
Hope this helps
I found a way to create a file at startup for my reboot script. I incorporated it with the answers provided by swalladge and also shubh. Thank you so much!
#!/bin/bash
#testing making a startup application
echo "
[Desktop Entry]
Type=Application
Exec=notify-send success
Hidden=false
NoDisplay=false
X-GNOME-Autostart-enabled=true
Name[en_CA]=This is a Test
Name=This is a Test
Comment[en_CA]=
Comment=" > ~/.config/autostart/test.desktop
I create a /etc/rc.local file to execute user3089519's script, and this works for my case. (And for bootloop.txt, I put it here: /usr/local/share/bootloop.txt )
First: sudo nano /etc/rc.local
Then edit this:
#!/bin/bash
#TODO: things you want to execute when system boot.
/path/to/reboot_five_times.sh
exit 0
Then it works.
Don't forget edit /etc/rc.local and remove /path/to/reboot_five_times.sh when you done reboot cycling.
I cannot get a script to return to bash.
The script is kicked off via the following Docker directives:
ENTRYPOINT ["/bin/bash", "-c"]
CMD ["set -e && /config/startup/init.sh"]
The init script looks like this:
#!/bin/bash
if [ -d /etc/postfix/init.d ]; then
for f in /etc/postfix/init.d/*.sh; do
[ -f "$f" ] && . "$f"
done
fi
echo "[x] Starting supervisord ..."
/usr/bin/supervisord -c /etc/supervisord.conf
bash
And this is the command I use to kick off the image into a container:
docker run -it --env-file ENV_LOCAL mailrelay
The init script runs as expected (and I see output from the scripts within the /etc/postfix/init.d/ directory and supervisord kicks off Postfix.
The problem is getting the script to return to the parent process (bash) instead of needing to start a new one. After it hits the supervisord the session sits there, requiring a Ctrl+C to get it to get back into a bash prompt.
If I leave off the call to bash at the end of the init.sh script, Ctrl+D exits the script AND the container, returning me to the host OS (osx). If I replace the bash call with exit, it returns to the host OS as well.
Is supervisord behaving the way it's supposed to, by running in the foreground this way? I'd like to be able to easily get back into the container shell session to check to see if things are running. Am I left with needing to Ctrl+D (into the secondary bash session) in order to do this?
UPDATE
Marc B
take out the bash line, so you don't start a new shell. and if
supervisord doesn't go into the background automatically, you could
try running it with & to force it into the background, or maybe
there's an extra cli option to force it to go into daemon mode
I've tried removing the last call to bash, but as I've mentioned it just sits there still, and Ctrl+D takes me to the host OS (exits the container).
I just tried /usr/bin/supervisord -c /etc/supervisord.conf & (and left off the call to bash at the end) and it just immediately returns to host OS, exiting the container. I assume because the container had nothing left to "do", and so stopped.
#!/bin/bash
if [ -d /etc/postfix/init.d ]; then
for f in /etc/postfix/init.d/*.sh; do
[ -f "$f" ] && . "$f"
done
fi
echo "[x] Starting supervisord ..."
/usr/bin/supervisord -c /etc/supervisord.conf
one
bash # You are spawning a new bash shell here. Remove this statement
At the end your're stuck in a child bash shell :(
Now if you're not returning to the parent shell, the last command that you have run is the culprit.
/usr/bin/supervisord -c /etc/supervisord.conf
You can either force the command to run in the background by
/usr/bin/supervisord -c /etc/supervisord.conf & #the & tells to run in background
A workaround for keeping the container open is mentioned here
I have this script:
#!/bin/sh
while [ true ] ; do
urlfile=$( ls /root/wget/wget-download-link.txt | head -n 1 )
dir=$( cat /root/wget/wget-dir.txt )
if [ "$urlfile" = "" ] ; then
sleep 30
continue
fi
url=$( head -n 1 $urlfile )
if [ "$url" = "" ] ; then
mv $urlfile $urlfile.invalid
continue
fi
mv $urlfile $urlfile.busy
wget -b $url -P $dir -o /www/wget.log -c -t 100 -nc
mv $urlfile.busy $urlfile.done
done
The script basically checks for any new URLs at wget-download-link.txt for every 30 seconds and if there's a new URL it'll download it with wget, the problem is that when I try to run this script on Putty like this
/root/wget/wget_download.sh --daemon
it's still running in the foreground, I still can see the terminal output. How do I make it run in the background ?
In OpenWRT there is neither nohup nor screen available by default, so a solution with only builtin commands would be to start a subshell with brackets and put that one in the background with &:
(/root/wget/wget_download.sh >/dev/null 2>&1 )&
you can test this structure easily on your desktop for example with
(notify-send one && sleep 15 && notify-send two)&
... and then close your console before those 15 seconds are over, you will see the commands in the brackets continue execution after closing the console.
The following command will also work:
((/root/wget/wget_download.sh)&)&
This way you don't have to install the 'nohub' command in the tight memory space of the router used for OpenWrt.
I found this somewhere several years ago. It works.
The &at the end of script should be enough, if you see output from the script it means, that stdout and/or stderr is not closed, or not redirect to /dev/null
You can use this answer:
How to redirect all output to /dev/null
I am using openwrt merlin and the only way to get it working was using the crud cron manager[1]. Nohub and screen are not available as solutions.
cru a pinggw "0 * * * * /bin/ping -c 10 -q 192.168.2.254"
works like charm
[1][https://www.cyberciti.biz/faq/how-to-add-cron-job-on-asuswrt-merlin-wifi-router/]
https://openwrt.org/packages/pkgdata/coreutils-nohup
opkg update
opkg install coreutils-nohup
nohup yourscript.sh &
You can use nohup.
nohup yourscript.sh
or
nohup yourscript.sh &
Your script will keep running even if you close your putty session, and all the output will be written to a text file in same directory.
nohup is often used in combination with the nice command to run processes on a lower priority.
nohup nice yourscript.sh &
See: http://en.wikipedia.org/wiki/Nohup
For busybox in Openwrt Merlin system, I got a better solution which combined cru and date command
cru a YOUR_UNIQUE_CRON_NAME "`date -D '%s' +'%M %H %d %m *' -d $(( \`date +%s\`+2*60 ))` YOUR_CMD_HERE"
which add a cron job running 2 minutes later, and only run once.
Inspired by PlagTag's idea.
In another way these code would tried:
ssh admin#192.168.1.1 "/jffs/your_script.sh &"
Simple and without any programs like nohup screen...
(BTW: worked on Asus-Merlin firmware)
Try this:
nohup /root/wget/wget_download.sh >/dev/null 2>&1 &
It will go to the background so when you close your Putty session, it will be still running, and it won't send messages to the terminal.
I want to send an email when the system is going to shutdown to an email ID. I have CentOS 6.4. Below is my Script.
cat /ect/init.d/sendshtmail
#!/bin/bash
EMAIL="example#example.com"
SHUTDOWNSUBJECT="["`hostname`"] - System Shutdown"
SHUTDOWNBODY="This is an automated message to notify you that "`hostname`" is shutting down.
LOCKFILE=/var/lock/subsys/SystemEmail
echo "${SHUTDOWNBODY}" | mutt -s "${SHUTDOWNSUBJECT}" ${EMAIL}
It has the appropriate permission. While running it manually it's working perfectly. I have just symlinked it to /etc/rc0.d/ folder. By issuing below command.
ln -s /etc/init.d/sendshtmail /etc/rc0.d/K00sendshtmail
But the script is not sending any email during shutdown. Thanks in Advance.
Place your shell script in /etc/init.d with executable permission and symlink name should start with K##. If you want to execute your script at first place immediately after shut down then name it with K00scriptname. Script started will K will be executed first based on ascending order then script with S.
ln -s /etc/init.d/script /etc/rc0.d/K00scriptname
Shutdown command will send the stop signal to script, your script (K00scriptname) should have stop function like example
stop()
{
echo "executing scriptname"
"Your script logic"
}
case "$1" in
stop)
stop
;;
esac
Most important, K00scriptname will execute only if there would be lock file present in /var/lock/subsys folder, so do "touch /var/lock/subsys/scriptname" then check by doing shutdown.
Try to set executable permissions for your script. Sometimes you need to do that to activate it.
chmod 755 /etc/init.d/sendshtmail
Also try to use absolute paths for your command, while quoting the other variable as well.
echo "${SHUTDOWNBODY}" | /usr/bin/mutt -s "${SHUTDOWNSUBJECT}" "${EMAIL}"
Another attempt is to switch your user to your current user e.g.
echo "${SHUTDOWNBODY}" | su -l -c "/usr/bin/mutt -s \"${SHUTDOWNSUBJECT}\" \"${EMAIL}\"" yourusername
ln -s /etc/init.d/sendshtmail /etc/rc0.d/S01sendshtmail
The symlink name should begin with a S - for Start (K for Kill)
The two-digit specifies the order of execution for your script, the lowest numbered being execute first.