I'm trying to send packets through ppp link (created by wvdial connecting a 3g modem) but failing so far. Here is my 'ip addr' printout:
22: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.40.43.62 peer 10.64.64.64/32 scope global ppp0
valid_lft forever preferred_lft forever*
And this is how i'm trying to send by Scapy:
[root#server1 ~]# scapy
INFO: Can't import matplotlib. Won't be able to plot.
INFO: Can't import PyX. Won't be able to use psdump() or pdfdump().
WARNING: No route found for IPv6 destination :: (no default route?)
INFO: Can't import python ecdsa lib. Disabled certificate manipulation tools
Welcome to Scapy (2.3.3)
>>> pkt=PPP()/IP(src="10.40.43.62", dst="8.8.8.8")/ICMP()/"1234567890"
>>> pkt.show()
###[ PPP Link Layer ]###
proto= Internet Protocol version 4
###[ IP ]###
version= 4
ihl= None
tos= 0x0
len= None
id= 1
flags=
frag= 0
ttl= 64
proto= icmp
chksum= None
src= 10.40.43.62
dst= 8.8.8.8
\options\
###[ ICMP ]###
type= echo-request
code= 0
chksum= None
id= 0x0
seq= 0x0
###[ Raw ]###
load= '1234567890'
>>> sendp(pkt, iface="ppp0")
.
Sent 1 packets.
>>> quit()
packet capture is showing Ethernet layer is getting added:
[root#server1 ~]# tshark -V -i ppp0
Running as user "root" and group "root". This could be dangerous. Capturing on 'ppp0' Frame 1: 56 bytes on wire (448 bits), 56 bytes captured (448 bits) on interface 0
Interface id: 0
Encapsulation type: Linux cooked-mode capture (25)
Arrival Time: Jan 29, 2018 10:54:20.793541000 BDT
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1517201660.793541000 seconds
[Time delta from previous captured frame: 0.000000000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 0.000000000 seconds]
Frame Number: 1
Frame Length: 56 bytes (448 bits)
Capture Length: 56 bytes (448 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: sll:eth:data] Linux cooked capture
Packet type: Sent by us (4)
Link-layer address type: 512
Link-layer address length: 0
Protocol: Ethernet (0x0003) Ethernet II, Src: EquipTra_00:40:01 (00:01:00:00:40:01), Dst: Semptian_00:00:26 (00:21:45:00:00:26)
Destination: Semptian_00:00:26 (00:21:45:00:00:26)
Address: Semptian_00:00:26 (00:21:45:00:00:26)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
Source: EquipTra_00:40:01 (00:01:00:00:40:01)
Address: EquipTra_00:40:01 (00:01:00:00:40:01)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
Type: Unknown (0x3561) Data (26 bytes)
0000 0a 28 2b 3e 08 08 08 08 08 00 ed fa 00 00 00 00 .(+>............ 0010 31 32 33 34 35 36 37 38 39 30 1234567890
Data: 0a282b3e080808080800edfa000000003132333435363738...
[Length: 26]
is send/sendp/sr are right command for this, what i am missing here? i can send ping through the ppp interface and in the packet capture it shows as ppp link layer.
this is the packet capture of scapy crafted packet and normal ICMP packet from ping tool
Normal:
12 <packet>
<proto name="geninfo" pos="0" showname="General information" size="100">
<field name="num" pos="0" show="13" showname="Number" value="d" size="100"/>
<field name="len" pos="0" show="100" showname="Frame Length" value="64" size="100"/>
<field name="caplen" pos="0" show="100" showname="Captured Length" value="64" size="100"/>
<field name="timestamp" pos="0" show="Jan 31, 2018 00:47:08.960176000 BDT" showname="Captured Time" value="1517338028.960176000" size="100"/>
</proto>
<proto name="frame" showname="Frame 13: 100 bytes on wire (800 bits), 100 bytes captured (800 bits) on interface 0" size="100" pos="0">
<field name="frame.interface_id" showname="Interface id: 0" size="0" pos="0" show="0"/>
<field name="frame.encap_type" showname="Encapsulation type: Linux cooked-mode capture (25)" size="0" pos="0" show="25"/>
<field name="frame.time" showname="Arrival Time: Jan 31, 2018 00:47:08.960176000 BDT" size="0" pos="0" show="Jan 31, 2018 00:47:08.960176000"/>
<field name="frame.offset_shift" showname="Time shift for this packet: 0.000000000 seconds" size="0" pos="0" show="0.000000000"/>
<field name="frame.time_epoch" showname="Epoch Time: 1517338028.960176000 seconds" size="0" pos="0" show="1517338028.960176000"/>
<field name="frame.time_delta" showname="Time delta from previous captured frame: 50.679499000 seconds" size="0" pos="0" show="50.679499000"/>
<field name="frame.time_delta_displayed" showname="Time delta from previous displayed frame: 50.679499000 seconds" size="0" pos="0" show="50.679499000"/>
<field name="frame.time_relative" showname="Time since reference or first frame: 196.152414000 seconds" size="0" pos="0" show="196.152414000"/>
<field name="frame.number" showname="Frame Number: 13" size="0" pos="0" show="13"/>
<field name="frame.len" showname="Frame Length: 100 bytes (800 bits)" size="0" pos="0" show="100"/>
<field name="frame.cap_len" showname="Capture Length: 100 bytes (800 bits)" size="0" pos="0" show="100"/>
<field name="frame.marked" showname="Frame is marked: False" size="0" pos="0" show="0"/>
<field name="frame.ignored" showname="Frame is ignored: False" size="0" pos="0" show="0"/>
<field name="frame.protocols" showname="Protocols in frame: sll:ip:icmp:data" size="0" pos="0" show="sll:ip:icmp:data"/>
</proto>
<proto name="sll" showname="Linux cooked capture" size="16" pos="0">
<field name="sll.pkttype" showname="Packet type: Sent by us (4)" size="2" pos="0" show="4" value="0004"/>
<field name="sll.hatype" showname="Link-layer address type: 512" size="2" pos="2" show="512" value="0200"/>
<field name="sll.halen" showname="Link-layer address length: 0" size="2" pos="4" show="0" value="0000"/>
<field name="sll.etype" showname="Protocol: IP (0x0800)" size="2" pos="14" show="0x0800" value="0800"/>
</proto>
<proto name="ip" showname="Internet Protocol Version 4, Src: 10.93.65.103 (10.93.65.103), Dst: 8.8.8.8 (8.8.8.8)" size="20" pos="16">
<field name="ip.version" showname="Version: 4" size="1" pos="16" show="4" value="45"/>
<field name="ip.hdr_len" showname="Header length: 20 bytes" size="1" pos="16" show="20" value="45"/>
<field name="ip.dsfield" showname="Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00: Not-ECT (Not ECN-Capable Transport))" size="1" pos="17" show="0" value="00">
<field name="ip.dsfield.dscp" showname="0000 00.. = Differentiated Services Codepoint: Default (0x00)" size="1" pos="17" show="0x00" value="0" unmaskedvalue="00"/>
<field name="ip.dsfield.ecn" showname=".... ..00 = Explicit Congestion Notification: Not-ECT (Not ECN-Capable Transport) (0x00)" size="1" pos="17" show="0x00" value="0" unmaskedvalue="00"/>
</field>
<field name="ip.len" showname="Total Length: 84" size="2" pos="18" show="84" value="0054"/>
<field name="ip.id" showname="Identification: 0x0ea5 (3749)" size="2" pos="20" show="0x0ea5" value="0ea5"/>
<field name="ip.flags" showname="Flags: 0x02 (Don't Fragment)" size="1" pos="22" show="0x02" value="40">
<field name="ip.flags.rb" showname="0... .... = Reserved bit: Not set" size="1" pos="22" show="0" value="40"/>
<field name="ip.flags.df" showname=".1.. .... = Don't fragment: Set" size="1" pos="22" show="1" value="40"/>
<field name="ip.flags.mf" showname="..0. .... = More fragments: Not set" size="1" pos="22" show="0" value="40"/>
</field>
<field name="ip.frag_offset" showname="Fragment offset: 0" size="2" pos="22" show="0" value="4000"/>
<field name="ip.ttl" showname="Time to live: 64" size="1" pos="24" show="64" value="40"/>
<field name="ip.proto" showname="Protocol: ICMP (1)" size="1" pos="25" show="1" value="01"/>
<field name="ip.checksum" showname="Header checksum: 0xd030 [correct]" size="2" pos="26" show="0xd030" value="d030">
<field name="ip.checksum_good" showname="Good: True" size="2" pos="26" show="1" value="d030"/>
<field name="ip.checksum_bad" showname="Bad: False" size="2" pos="26" show="0" value="d030"/>
</field>
<field name="ip.src" showname="Source: 10.93.65.103 (10.93.65.103)" size="4" pos="28" show="10.93.65.103" value="0a5d4167"/>
<field name="ip.addr" showname="Source or Destination Address: 10.93.65.103 (10.93.65.103)" hide="yes" size="4" pos="28" show="10.93.65.103" value="0a5d4167"/>
<field name="ip.src_host" showname="Source Host: 10.93.65.103" hide="yes" size="4" pos="28" show="10.93.65.103" value="0a5d4167"/>
<field name="ip.host" showname="Source or Destination Host: 10.93.65.103" hide="yes" size="4" pos="28" show="10.93.65.103" value="0a5d4167"/>
<field name="ip.dst" showname="Destination: 8.8.8.8 (8.8.8.8)" size="4" pos="32" show="8.8.8.8" value="08080808"/>
<field name="ip.addr" showname="Source or Destination Address: 8.8.8.8 (8.8.8.8)" hide="yes" size="4" pos="32" show="8.8.8.8" value="08080808"/>
<field name="ip.dst_host" showname="Destination Host: 8.8.8.8" hide="yes" size="4" pos="32" show="8.8.8.8" value="08080808"/>
<field name="ip.host" showname="Source or Destination Host: 8.8.8.8" hide="yes" size="4" pos="32" show="8.8.8.8" value="08080808"/>
</proto>
<proto name="icmp" showname="Internet Control Message Protocol" size="64" pos="36">
<field name="icmp.type" showname="Type: 8 (Echo (ping) request)" size="1" pos="36" show="8" value="08"/>
<field name="icmp.code" showname="Code: 0" size="1" pos="37" show="0" value="00"/>
<field name="icmp.checksum" showname="Checksum: 0x5b93 [correct]" size="2" pos="38" show="0x5b93" value="5b93"/>
<field name="icmp.checksum_bad" showname="Bad Checksum: False" hide="yes" size="2" pos="38" show="0" value="5b93"/>
<field name="icmp.ident" showname="Identifier (BE): 4058 (0x0fda)" size="2" pos="40" show="4058" value="0fda"/>
<field name="icmp.ident" showname="Identifier (LE): 55823 (0xda0f)" size="2" pos="40" show="55823" value="0fda"/>
<field name="icmp.seq" showname="Sequence number (BE): 1 (0x0001)" size="2" pos="42" show="1" value="0001"/>
<field name="icmp.seq_le" showname="Sequence number (LE): 256 (0x0100)" size="2" pos="42" show="256" value="0001"/>
<field name="icmp.data_time" showname="Timestamp from icmp data: Jan 31, 2018 00:47:08.000000000 BDT" size="8" pos="44" show="Jan 31, 2018 00:47:08.000000000" value="acbd705a00000000"/>
<field name="icmp.data_time_relative" showname="Timestamp from icmp data (relative): 0.960176000 seconds" size="8" pos="44" show="0.960176000" value="acbd705a00000000"/>
<field name="data" value="a2a60e0000000000101112131415161718191a1b1c1d1e1f202122232425262728292a2b2c2d2e2f3031323334353637">
<field name="data.data" showname="Data: a2a60e0000000000101112131415161718191a1b1c1d1e1f..." size="48" pos="52" show="a2:a6:0e:00:00:00:00:00:10:11:12:13:14:15:16:17:18:19:1a:1b:1c:1d:1e:1f:20:21:22:23:24:25:26:27:28:29:2a:2b:2c:2d:2e:2f:30:31:32:33:34:35:36:37" value="a2a60e0000000000101112131415161718191a1b1c1d1e1f202122232425262728292a2b2c2d2e2f3031323334353637"/>
<field name="data.len" showname="Length: 48" size="0" pos="52" show="48"/>
</field>
</proto>
</packet>
Scapy Crafted:
9 <packet>
<proto name="geninfo" pos="0" showname="General information" size="54">
<field name="num" pos="0" show="10" showname="Number" value="a" size="54"/>
<field name="len" pos="0" show="54" showname="Frame Length" value="36" size="54"/>
<field name="caplen" pos="0" show="54" showname="Captured Length" value="36" size="54"/>
<field name="timestamp" pos="0" show="Jan 31, 2018 00:45:47.650839000 BDT" showname="Captured Time" value="1517337947.650839000" size="54"/>
</proto>
<proto name="frame" showname="Frame 10: 54 bytes on wire (432 bits), 54 bytes captured (432 bits) on interface 0" size="54" pos="0">
<field name="frame.interface_id" showname="Interface id: 0" size="0" pos="0" show="0"/>
<field name="frame.encap_type" showname="Encapsulation type: Linux cooked-mode capture (25)" size="0" pos="0" show="25"/>
<field name="frame.time" showname="Arrival Time: Jan 31, 2018 00:45:47.650839000 BDT" size="0" pos="0" show="Jan 31, 2018 00:45:47.650839000"/>
<field name="frame.offset_shift" showname="Time shift for this packet: 0.000000000 seconds" size="0" pos="0" show="0.000000000"/>
<field name="frame.time_epoch" showname="Epoch Time: 1517337947.650839000 seconds" size="0" pos="0" show="1517337947.650839000"/>
<field name="frame.time_delta" showname="Time delta from previous captured frame: 41.557182000 seconds" size="0" pos="0" show="41.557182000"/>
<field name="frame.time_delta_displayed" showname="Time delta from previous displayed frame: 41.557182000 seconds" size="0" pos="0" show="41.557182000"/>
<field name="frame.time_relative" showname="Time since reference or first frame: 114.843077000 seconds" size="0" pos="0" show="114.843077000"/>
<field name="frame.number" showname="Frame Number: 10" size="0" pos="0" show="10"/>
<field name="frame.len" showname="Frame Length: 54 bytes (432 bits)" size="0" pos="0" show="54"/>
<field name="frame.cap_len" showname="Capture Length: 54 bytes (432 bits)" size="0" pos="0" show="54"/>
<field name="frame.marked" showname="Frame is marked: False" size="0" pos="0" show="0"/>
<field name="frame.ignored" showname="Frame is ignored: False" size="0" pos="0" show="0"/>
<field name="frame.protocols" showname="Protocols in frame: sll:data" size="0" pos="0" show="sll:data"/>
</proto>
<proto name="sll" showname="Linux cooked capture" size="16" pos="0">
<field name="sll.pkttype" showname="Packet type: Sent by us (4)" size="2" pos="0" show="4" value="0004"/>
<field name="sll.hatype" showname="Link-layer address type: 512" size="2" pos="2" show="512" value="0200"/>
<field name="sll.halen" showname="Link-layer address length: 0" size="2" pos="4" show="0" value="0000"/>
<field name="sll.ltype" showname="Protocol: Unknown (0x0000)" size="2" pos="14" show="0x0000" value="0000"/>
</proto>
<proto name="fake-field-wrapper">
<field name="data" value="0021450000240001000040011f050a5d4167080808080800272b000000003132333435363738">
<field name="data.data" showname="Data: 0021450000240001000040011f050a5d4167080808080800..." size="38" pos="16" show="00:21:45:00:00:24:00:01:00:00:40:01:1f:05:0a:5d:41:67:08:08:08:08:08:00:27:2b:00:00:00:00:31:32:33:34:35:36:37:38" value="0021450000240001000040011f050a5d4167080808080800272b000000003132333435363738"/>
<field name="data.len" showname="Length: 38" size="0" pos="16" show="38"/>
</field>
</proto>
</packet>
You should first capture a packet with both Scapy and tshark and see how they look like. Then, try to mimic this packet, send it back (at first, you can try to send the exact packet as you received it) and see how tshark sees it.
An option if that fails is to leave the PPP layer to the host's network stack and use sr(IP()[...]) rather than srp(PPP()/IP()) and see if that works. For that, you need to check that the route to your IP destination uses the PPP interface (use conf.route.route("[IP address]") to be sure).
Regarding why sendp does not work, I think this might be a bug in Scapy. If you are using Linux, could you get the current development version, apply the following patch and try again?
diff --git a/scapy/arch/linux.py b/scapy/arch/linux.py
index b451fd15..4ad3c82f 100644
--- a/scapy/arch/linux.py
+++ b/scapy/arch/linux.py
## -491,7 +491,7 ## class L3PacketSocket(SuperSocket):
class L2Socket(SuperSocket):
desc = "read/write packets at layer 2 using Linux PF_PACKET sockets"
- def __init__(self, iface=None, type=ETH_P_ALL, promisc=None, filter=None, nofilter=0):
+ def __init__(self, iface=None, type=0, promisc=None, filter=None, nofilter=0):
self.iface = conf.iface if iface is None else iface
self.ins = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(type))
self.ins.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 0)
## -555,7 +555,7 ## class L2Socket(SuperSocket):
class L2ListenSocket(SuperSocket):
desc = "read packets at layer 2 using Linux PF_PACKET sockets"
- def __init__(self, iface = None, type = ETH_P_ALL, promisc=None, filter=None, nofilter=0):
+ def __init__(self, iface=None, type=0, promisc=None, filter=None, nofilter=0):
self.type = type
self.outs = None
self.ins = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(type))
Related
I made all the other entries false if one entry is true. How do I protect this entry from being deleted?
There must always be at least one entry.
res.partner.xml
<odoo>
<record id="view_partner_form_inherit" model="ir.ui.view">
<field name="name">res.partner.form</field>
<field name="model">res.partner</field>
<field name="inherit_id" ref="base.view_partner_form"/>
<field name="arch" type="xml">
<xpath expr="//form/sheet/group/group/field[#name='mobile']" position="after">
<field name="is_primary" string='Is primary'/>
</xpath>
<div t-att-class="color + (record.title.raw_value == 1 ? ' oe_kanban_color_alert' : '') + ' oe_kanban_global_click'">
<div style="float: right; margin-top:-25%;">
<xpath expr="//div[hasclass('oe_kanban_details')]" position="inside">
<field name="is_primary" widget="checkbox"/>
</xpath>
</div>
</div>
</field>
</record>
</odoo>
Primary_contact.py
from odoo import api, fields, models, _
class PartnerPrimary(models.Model):
_inherit = "res.partner"
is_primary = fields.Boolean(string='Is primary')
#api.constrains('is_primary')
def check_is_primary(self):
if self.is_primary:
contacts_ids = self.parent_id.child_ids.filtered(lambda lm: lm.id != self.id)
for cont in contacts_ids:
cont.is_primary = False
I solved this problem
class PartnerPrimary(models.Model):
_inherit = "res.partner"
is_primary = fields.Boolean(string='Is primary')
#api.constrains('is_primary')
def check_is_primary(self):
if self.is_primary:
contacts_ids = self.parent_id.child_ids.filtered(lambda lm: lm.id != self.id)
for cont in contacts_ids:
cont.is_primary = False
def unlink(self):
for delete in self:
if delete.is_primary:
raise UserError(('You cannot delete'))
return super(PartnerPrimary, self).unlink()
I'm trying to set nextcall based on time zone in cronjob in 2nd next day
Here's my code:
<field name="nextcall"
eval="datetime.now() + (datetime.now(pytz.timezone('Asia/Ho_Chi_Minh')).replace(day=26, hour=2, minute=00, second=00) - datetime.now(pytz.timezone('Asia/Ho_Chi_Minh'))) % timedelta(hours=24)"/>
This code is to change the nextcall to the time zone of "Asia/Ho_Chi_Minh".
But when using it, i can't set the days to it, such as 2nd next day.
I've try to set day, but not working.
Please help, thanks.
Edit:
Full code:
<record id="ir_cron_check_qty_and_move_from_internal_customer_to_customer" model="ir.cron">
<field name="name">KiotViet: Check Qty And Move Product From Internal Customer To Customer</field>
<field name="model_id" ref="model_kiotviet_cron"/>
<field name="type">ir.actions.server</field>
<field name="state">code</field>
<field name="code">model.check_qty_and_move_from_internal_customer_to_customer()</field>
<!-- set cron will run after 1 days -->
<field name="interval_number">1</field>
<field name="interval_type">days</field>
<!-- set cron will run at 2am -->
<field name="nextcall"
eval="datetime.now() + (datetime.now(pytz.timezone('Asia/Ho_Chi_Minh')).replace(day=26, hour=2, minute=00, second=00) - datetime.now(pytz.timezone('Asia/Ho_Chi_Minh'))) % timedelta(hours=24)"/>
<field name="numbercall">-1</field>
</record>
I am totally new to odoo, now I am learning about building modules and I am working with odoo 13, When I tried installing the school module it gives me the following error:
File "/home/user/odoo/odoo13/odoo/fields.py", line 2338, in convert_to_cache
raise ValueError("Wrong value for %s: %r" % (self, value))
odoo.tools.convert.ParseError: "Wrong value for ir.ui.menu.action: 'form,189'" while parsing /home/user/odoo/odoo13/custom_addons/school/views/student_view.xml:2, near
<odoo>
<data>
<record id="student_menu_action" model="ir.actions.act_window">
<field name="name">Students</field>
<field name="res_model">student.student</field>
<field name="type">form</field>
<field name="view_mode">tree,form</field>
<field name="domain">[]</field>
<field name="help" type="html
<p class="oe_view_nocontent_create">Create The First Student
</p>
</field>
</record>
<menuitem id="school_menu" name="School"/>
<menuitem id="school_student_menu" parent="school_menu" name="Student" action="student_menu_action"/>
</data>
</odoo>
I would appreciate any help, feel free to ask for more informations if necessary in the comment section.
You forgot to close your double quote and tag near type attribute:
<field name="help" type="html
<p class="oe_view_nocontent_create">Create The First Student</p>
</field>
It should be type="html">
in the below snippet I have two different records.
In the HEADLINE we see one is an Earnings Call, while the other is a message about an acquisition.
<?xml version="1.0" encoding="UTF-8"?>
<Response>
<Record key="18AD026E657696BE1A7AE7C0D1CE94EF321EFD4C203B31A1F87DD27DEF345872" req_sym="OUT1V-FI">
<Fields>
<Field id="7000" name="HEADLINE" value="CORRECTED TRANSCRIPT: Outokumpu Oyj(OUT1V-FI), Q3 2019 Earnings Call, 31-October-2019 9:00 AM ET" />
<Field id="7001" name="SOURCE" value="FCST" />
<Field id="7003" name="ALL_IDS" value="OUT1V-FI" />
<Field id="7046" name="PRIMARY_IDS" value="OUT1V-FI" />
<Field id="7004" name="STORY_DATE" value="20191101" />
<Field id="7005" name="STORY_TIME" value="041606" />
<Field id="7007" name="CATEGORIES" value="CN:FI,DT:EARN,DT:ERNS,DT:ER_GEN,DT:EVTS,DT:EV_ME,DT:FILNS_TS_TR,IN:METAL,LN:EN,RN:EU,RN:NE,SB:ERNS,SB:ER_GEN,SB:EVTS,SB:EV_ME" />
<Field id="7002" name="SEARCH_IDS" value="OUT1V-FI" />
<Field id="7011" name="LINK1" value="https://datadirect.factset.com/services/docretrieval?report=feed&key=U2FsdGVkX1%2fEHwXn0zpAkqjR%2bJOkauoxw0LQ2BhLtraPMDZwyAwoN9WuYQ8PMM4ZKNAXx8VpWFsDe2T%2fZ7WNdQ%3d%3d&timezone=America/New_York" />
<Field id="7039" name="FILING_SIZE" value="NULL" />
<Field id="8000" name="EVENT_IDS" value="1201149455" />
<Field id="8001" name="REPORT_IDS" value="2314010" />
<Field id="8002" name="EVENTDATE-REPORTID-TRANSCRIPTTYPE" value="20191031-2314010-C" />
<Field id="8003" name="EVENT" value="E" />
<Field id="8004" name="UPLOAD_DATE_TIME" value="2019-11-01 22:36:48" />
<Field id="8005" name="VERSION_ID" value="4379596" />
</Fields>
<Record key="0BB357A317B871E3ED0FD0ECBD210D771E8331097964E1D9223C9BEE844E68F2" req_sym="SUBC-NO">
<Fields>
<Field id="7000" name="HEADLINE" value="CORRECTED TRANSCRIPT: Subsea 7 SA(SUBC-NO), Acquisition of McDermott International,Inc by Subsea 7 S.A Call, 23-April-2018 9:00 AM ET" />
<Field id="7001" name="SOURCE" value="FCST" />
<Field id="7003" name="ALL_IDS" value="SUBC-NO" />
<Field id="7046" name="PRIMARY_IDS" value="SUBC-NO" />
<Field id="7004" name="STORY_DATE" value="20180423" />
<Field id="7005" name="STORY_TIME" value="142404" />
<Field id="7007" name="CATEGORIES" value="CN:GB,DT:CA_MNA_GEN,DT:CORPS,DT:FILNS_TS_TR,DT:MANDA,IN:OIL,LN:EN,RN:EU,SB:EVTS,SB:MANDA" />
<Field id="7002" name="SEARCH_IDS" value="SUBC-NO" />
<Field id="7011" name="LINK1" value="https://datadirect.factset.com/services/docretrieval?report=feed&key=U2FsdGVkX1%2bJsxYfwGoI5ggt7BF%2bBr8ttuTeQZmMIWBDSxPjFIksm%2bjEDqkK5hq4NDxszCncdCgA18qo3qN5SQ%3d%3d&timezone=America/New_York" />
<Field id="7039" name="FILING_SIZE" value="NULL" />
<Field id="8000" name="EVENT_IDS" value="6235691" />
<Field id="8001" name="REPORT_IDS" value="2081721" />
<Field id="8002" name="EVENTDATE-REPORTID-TRANSCRIPTTYPE" value="20180423-2081721-C" />
<Field id="8003" name="EVENT" value="SS" />
<Field id="8004" name="UPLOAD_DATE_TIME" value="2018-04-26 22:35:20" />
<Field id="8005" name="VERSION_ID" value="3453250" />
</Fields>
</Record>
</Response>
Right now my code cannot differentiate between the two records.
from bs4 import BeautifulSoup
import pandas as pd
import xml.etree.ElementTree as ET
import glob
import os
path = "/Users/User/Downloads/Thesis papers/links/"
for filename in glob.glob(os.path.join(path, "*")):
with open(filename) as open_file:
content = open_file.read()
bs = BeautifulSoup(content, "xml")
for individual_xml in bs.find_all("Response"):
for link in individual_xml.find_all("Fields"):
for fields in link.find_all("Field", {"id":"7000"}):
print(fields[])
How can I specify I only want the records when the words Earnings Call is included, like the first record in the xml snippet?
Solved it myself.
Here's the solution. Just added these lines to the end:
word = "Earnings Call"
if word in fields["value"]:
print(fields)
Now that you have the answer, I'll give you another solution for reference only.
from simplified_scrapy import SimplifiedDoc,req,utils
html = ''' '''
doc = SimplifiedDoc(html)
field = doc.getElementByReg('Earnings Call',tag='Field') # Locate by value
print (field)
field = doc.select('Field#7000') # Get the first Field in the document with id = 7000
# field = doc.select('Response>Fields>Field#7000')
print (field)
Result:
{'id': '7000', 'name': 'HEADLINE', 'value': 'CORRECTED TRANSCRIPT: Outokumpu Oyj(OUT1V-FI), Q3 2019 Earnings Call, 31-October-2019 9:00 AM ET', 'tag': 'Field'}
{'id': '7000', 'name': 'HEADLINE', 'value': 'CORRECTED TRANSCRIPT: Outokumpu Oyj(OUT1V-FI), Q3 2019 Earnings Call, 31-October-2019 9:00 AM ET', 'tag': 'Field'}
I want to view 'working_hours' field only for employee, his manager and 'hr.group_hr_user' group.
how to hide this field automatically without edit form or trigger a button
class InheritHrEmployee(models.Model):
_inherit = 'hr.employee'
def hide_working_hours(self):
if self.env.uid == self.user_id.id or self.env.uid == self.parent_id.user_id.id or self.env.user.has_group(
'hr.group_hr_user'):
self.working_hours_view = True
else:
self.working_hours_view = False
working_hours_view = fields.Boolean(computed=hide_working_hours)
XML:
<record id="hide_working_hours_for_employees" model="ir.ui.view">
<field name="name">Hide Working Hours Employees Form</field>
<field name="model">hr.employee</field>
<field name="inherit_id" ref="hr.view_employee_form"/>
<field name="arch" type="xml">
<xpath expr="//field[#name='resource_calendar_id']" position="before">
<field name="working_hours_view" invisible="1"/>
</xpath>
<xpath expr="//field[#name='resource_calendar_id']" position="attributes">
<attribute name="attrs">{'invisible': [('working_hours_view' ,'=', False)]}</attribute>
</xpath>
</field>
</record>
Try below code for display working hours field only hr.group_hr_user group users.
XML:
<record id="hide_working_hours_for_employees" model="ir.ui.view">
<field name="name">Hide Working Hours Employees Form</field>
<field name="model">hr.employee</field>
<field name="inherit_id" ref="hr.view_employee_form"/>
<field name="arch" type="xml">
<xpath expr="//field[#name='resource_calendar_id']" position="before">
<field name="working_hours_view" invisible="1"/>
</xpath>
<xpath expr="//field[#name='resource_calendar_id']" position="attributes">
<attribute name="groups">hr.group_hr_user</attribute>
</xpath>
</field>
</record>
You can add multiple attributes in the XML file like above code.
i added the field before the function and it works now automatically
class InheritHrEmployee(models.Model):
_inherit = 'hr.employee'
inv = fields.Boolean(string="Invisible", compute="c_inv", store=False)
#api.one
def c_inv(self):
if self.env.uid == self.user_id.id or self.env.uid == self.parent_id.user_id.id or self.env.user.has_group(
'hr.group_hr_user'):
self.inv = False
else:
self.inv = True
.. like this example
make fields visible to user and invisible to other