After research I found:
git clone https://github.com/xianyi/OpenBLAS.git
cd OpenBLAS
make NO_AFFINITY=1 USE_OPENMP=1
sudo make install
and
CMAKE_LIBRARY_PATH=/opt/OpenBLAS/include:/opt/OpenBLAS/lib:$CMAKE_LIBRARY_PATH luarocks install torch
which again left me with an error:
Makefile.system:370: *** OpenBLAS:
Cannot set both USE_OPENMP=1 and USE_THREAD=0.
The USE_THREAD=0 is only for building single thread version.. Stop.
This is the necessary change:
make NO_AFFINITY=1 USE_OPENMP=0 USE_THREAD=0
Might be an issue if only one core is available.
Related
I'm currently trying to install Mozilla syncstorage-rs on a RockyLinux machine, and step by step I could reduce the amount of errors, but now I got stuck. I found in Makefile to execute the following command in case of SSL trouble, so I did so cargo build --features grpcio/openssl
and this is fine, this finally works:
cargo build --features grpcio/openssl
Compiling syncstorage v0.10.2 (/var/www/html/syncstorage-rs)
Finished dev [unoptimized + debuginfo] target(s) in 35.59s
But when I try to now run either make run or make test or anything else, I just get:
= note: /usr/bin/ld: /var/www/html/syncstorage-rs/target/debug/deps/libopenssl-dc6f50ea1194640f.rlib(openssl-dc6f50ea1194640f.openssl.9bacb62b-cgu.1.rcgu.o): undefined reference to symbol 'OPENSSL_cipher_name##OPENSSL_1_1_1'
//usr/lib64/libssl.so.1.1: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
= help: some `extern` functions couldn't be found; some native libraries may need to be installed or have their path specified
= note: use the `-l` flag to specify native libraries to link
= note: use the `cargo:rustc-link-lib` directive to specify the native libraries to link with Cargo (see https://doc.rust-lang.org/cargo/reference/build-scripts.html#cargorustc-link-libkindname)
error: could not compile `syncstorage` due to previous error
make: *** [Makefile:45: test] Error 101
What am I missing? I thought after building it could be run easily.
So the answer is to use cargo clean before continuing. I don't know why, but there seemed to be some old artifacts even if I hadn't built before. However, after executing cargo clear command, the build openssl runs completely (many lines more than before) and after that, there is one more little step to do:
python3 -m venv venv # creates a virtual environment named "venv"
source venv/bin/activate # enters the virtual environment
python3 -m pip install -r requirements.txt # installs the packages
and finally make run works.
For more details, see https://github.com/mozilla-services/syncstorage-rs/issues/1241
See https://www.youtube.com/watch?v=jdtoyIW4Lec
for a step by step instruction.
I am getting the error below while compiling and installing the "ModSecurity- Nginx" module.
Installing the "ModSecurity- Nginx" module
#yum install -y gcc-c++ flex bison yajl yajl-devel curl-devel curl GeoIP-devel doxygen zlib-devel pcre-devel lmdb-devel libxml2-devel ssdeep-devel lua-devel libtool autoconf automake
#cd /root
#git clone https://github.com/SpiderLabs/ModSecurity-nginx.git
#yum install libmodsecurity-devel
#cd /root/nginx-1.10.3/
#./configure --prefix=/opt/nginx --add-module=/root/ModSecurity-nginx
Compiling
#make **（Now start reporting errors）**
ERROR
/opt/ModSecurity-nginx/src/ngx_http_modsecurity_module.c: In function ‘ngx_http_modsecurity_create_ctx’:
/opt/ModSecurity-nginx/src/ngx_http_modsecurity_module.c:259:9: error: implicit declaration of function ‘msc_new_transrror=implicit-function-declaration] ctx->modsec_transaction = msc_new_transaction_with_id(mmcf->modsec, mcf->rules_set, (char *) s.data, r->conne
/opt/ModSecurity-nginx/src/ngx_http_modsecurity_module.c:259:33: error: assignment makes pointer from integer without ctx->modsec_transaction = msc_new_transaction_with_id(mmcf->modsec, mcf->rules_set, (char *) s.data, r->conne
cc1: all warnings being treated as errors
make[1]: *** [objs/addon/src/ngx_http_modsecurity_module.o] Error 1
make[1]: Leaving directory `/root/nginx-1.16.1'
make: *** [build] Error 2
The ModSecurity nginx connector compilation is failing because it can't find the ModSecurity headers. Every time a ModSecurity function is called, it's the first time the compiler is hearing about the existence of said function, thus making this an "implicit" function declaration.
To make a long story short, you need to specify where the compiler can find the ModSecurity headers and libraries. To do this, you're supposed to set two environment variables before configuring or compiling the connector module.
export MODSECURITY_INC="/opt/ModSecurity/headers/"
export MODSECURITY_LIB="/opt/ModSecurity/src/.libs/"
These paths were taken straight from the documentation, so you'll need to adjust them depending on where yum installed the libmodsecurity-devel package.
You can find the recipes for building the ModSecurity module and the ModSecurity nginx connector here and here, respectively.
I want to execute the following command
bundle install && rake install
but an error comes up and I try to figure out whats going on. I found that i need to install nokogiri. But when I try to install it an error comes up again. Any ideas? :/
sudo gem install nokogiri -v '1.8.5'
Building native extensions. This could take a while...
ERROR: Error installing nokogiri:
ERROR: Failed to build gem native extension.
current directory: /var/lib/gems/2.5.0/gems/nokogiri-1.8.5/ext/nokogiri
/usr/bin/ruby2.5 -r ./siteconf20181210-12550-orku3c.rb extconf.rb
checking if the C compiler accepts ... yes
Building nokogiri using packaged libraries.
Using mini_portile version 2.3.0
checking for gzdopen() in -lz... no
zlib is missing; necessary for building libxml2
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers. Check the mkmf.log file for more details. You may
need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/usr/bin/$(RUBY_BASE_NAME)2.5
--help
--clean
--use-system-libraries
--enable-static
--disable-static
--with-zlib-dir
--without-zlib-dir
--with-zlib-include
--without-zlib-include=${zlib-dir}/include
--with-zlib-lib
--without-zlib-lib=${zlib-dir}/lib
--enable-cross-build
--disable-cross-build
To see why this extension failed to compile, please check the mkmf.log which can be found here:
/var/lib/gems/2.5.0/extensions/x86_64-linux/2.5.0/nokogiri-1.8.5/mkmf.log
extconf failed, exit code 1
Gem files will remain installed in /var/lib/gems/2.5.0/gems/nokogiri-1.8.5 for inspection.
Results logged to /var/lib/gems/2.5.0/extensions/x86_64-linux/2.5.0/nokogiri-1.8.5/gem_make.out
I recently downloaded and unpacked the Rust Language from this site (Linux 64-bit).
I then installed Rust using the given script in the download install.sh:
root#kali:~# /root/rust-1.9.0-x86_64-unknown-linux-gnu/install.sh
install: uninstalling component 'rustc'
install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh
install: installing component 'rustc'
install: installing component 'rust-std-x86_64-unknown-linux-gnu'
install: installing component 'rust-docs'
install: installing component 'cargo'
Rust is ready to roll.
I am trying to install a crate with cargo, but I keep running into this error:
root#kali:~# cargo install racer
Updating registry `https://github.com/rust-lang/crates.io-index`
Compiling winapi v0.2.7
Compiling bitflags v0.5.0
error: can't find crate for `std` [E0463]
error: aborting due to previous error
Build failed, waiting for other jobs to finish...
error: can't find crate for `std` [E0463]
error: aborting due to previous error
error: failed to compile `racer v1.2.10`, intermediate artifacts can be found at `/root/target-install`
cargo install cargo-edit failed with the same result as above, so it's not limited to one particular package.
Even putting a simple program:
fn main() {
println!("Hello, world!");
}
in a file named hello.rs and running rustc hello.rs does not compile; it gives the same error: error: can't find crate for 'std' [E0463].
The download came with a directory named rust-std-x86_64-unknown-linux-gnu, which I assume is the std crate. How do I instruct rustc to find this directory when trying to locate the std crate?
The following will work for the simplest of compilations.
Assuming you extracted the tar file to, say
$HOME/rust-1.10.0-x86_64-unknown-linux-gnu
Then run
arch=x86_64-unknown-linux-gnu
dl=$HOME/rust-1.10.0-$arch
$dl/rustc/bin/rustc -L $dl/rustc/lib \
-L $dl/rust-std-$arch/lib/rustlib/$arch/lib \
hello.rs
But I'm sure a better way would be to run rustup as Chris Morgan suggest.
Coupla more points
You shouldn't compile code as root.
You may have to relogin or run bash -l to get the environment setup by rustup.
(Fellow rust newb here)
For me (Arch Linux) removing system's Rust fixed the issue.
pacman -Rc rust
I think there was a conflict among user installed Rust and system installed one.
I am on a linux box and trying to experiment with Haskell's Accelerate library but having problems installing it. I have successfully installed the accelerate package but there seems to be a dependency problem, which I have detailed below.
cabal: Error: some packages failed to install:
accelerate-cuda-0.14.0.0 depends on haskell-src-exts-1.14.0.1 which failed to
install.
cuda-0.5.1.1 failed during the configure step. The exception was:
ExitFailure 1
haskell-src-exts-1.14.0.1 failed during the configure step. The exception was:
ExitFailure 1
haskell-src-meta-0.6.0.5 depends on haskell-src-exts-1.14.0.1 which failed to
install.
language-c-quote-0.7.6 depends on haskell-src-exts-1.14.0.1 which failed to
install.
I searched SO and noticed someone else had a similiar issue installed the cuda package, and was resolved by adding the cabal bin path to the PATH; I tried this but it didn't solve this problem.
Please could someone help as I really keen to play with this fantastic library.
I wanted to check accelerate-examples and play with them and I also didn't have CUDA GPU (AMD only) and that's how I eventually installed accelerate-examples with stack:
git clone https://github.com/AccelerateHS/accelerate-examples
cd accelerate-examples
#choose version:
ln stack-8.6.yaml stack.yaml
#build without CUDA targeting:
stack build --flag accelerate-examples:-llvm-ptx --flag accelerate-fft:-llvm-ptx
Installation will build all the examples and print the info regarding where they was put.
Might also need to specify GHC libs path with something like: export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/.stack/programs/x86_64-linux/ghc-8.6.5/lib/ghc-8.6.5/rts/
Also checked that accelerate installs as well the same way but even without specifying any flags (I guess because it doesn't build any programs yet?), but examples are what's fun :)
P.S. You can move llvm-ptx flags to stack.yaml config: change # flags: {} line to:
flags:
accelerate-fft:
llvm-ptx: false
accelerate-examples:
llvm-ptx: false