I was trying to install the Mailparse PECL extension with WHM/cPanel and it kept failing because re2c was missing.
Download the RPM from EPEL (you can use cURL): http://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/r/re2c-0.14.3-2.el7.x86_64.rpm
curl http://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/r/re2c-0.14.3-2.el7.x86_64.rpm --output re2c-0.14.3-2.el7.x86_64.rpm
Install the RPM
rpm -Uvh re2c-0.14.3-2.el7.x86_64.rpm
That's it.
Related
I'd like to install GDAL on an EC2 instance running Amazon Linux (which I think is based on RHEL 6). I'd like to avoid compiling from source if possible.
The version of GDAL included in the EPEL Yum repository is too old for my purposes (gdal-1.7.3-15.el6.x86_64). EPEL 7 includes gdal-1.11.4-1.el7.x86_64 which would be perfect. Is there any way I could use this repo on Amazon Linux?
So far I've also tried:
Adding GDAL from the ELGIS 6 repo (which has version 1.9.2). However this failed to install – as found / by others. The ELGIS Wiki advises people to use EPEL now anyway.
Downloading and installing the more recent GDAL RPM from EPEL 7, but it fails due to mismatches between GDAL's dependencies and the available packages in my enabled repos.
I'm not at all experienced with Amazon Linux (or Yum) so any hints much appreciated.
This worked for me.
sudo yum -y update
sudo yum-config-manager --enable epel
sudo yum -y install make automake gcc gcc-c++ libcurl-devel proj-devel geos-devel
cd /tmp
curl -L http://download.osgeo.org/gdal/2.0.0/gdal-2.0.0.tar.gz | tar zxf -
cd gdal-2.0.0/
./configure --prefix=/usr/local --without-python
make -j4
sudo make install
cd /usr/local
tar zcvf ~/gdal-2.0.0-amz1.tar.gz *
From https://gist.github.com/mojodna/2f596ca2fca48f08438e
I faced the same problem. It is quite a bit challenging to install with yum.
Required packages
Using yum, you can install GDAL's required packages:
cpp
sqlite3
libtiff
cmake3
like so:
sudo yum install cpp.x86_64 sqlite-devel.x86_64 libtiff.x86_64 cmake3.x86_64
PROJ and GDAL
These two have to be installed from source (tarball) and they also depend on the build you want.
As for me, I was able to install GDAL 3.2.1 on Amazon Linux 2. I also have not tried installing it on an Amazon Linux 1 so it may or may not differ.
Nodejs version 4 has been released and installed on my windows machine.
I'm trying to install the package trough yum on redhat but i'm not getting the latest version.
i tried: sudo yum install -y nodejs but the lastest 4.0 version is not installed.
How do i install nodejs 4.0 on a redhat machine?
NodeJS 4.X for EL7 repos located at https://rpm.nodesource.com/pub_4.x/el/7/
To install with yum change baseurl in nodesource-el.repo file to:
baseurl=https://rpm.nodesource.com/pub_4.x/el/7/$basearch
/etc/yum.repos.d/nodesource-el.repo content:
[nodesource]
name=Node.js Packages for Enterprise Linux 7 - $basearch
baseurl=https://rpm.nodesource.com/pub_4.x/el/7/$basearch
failovermethod=priority
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL
[nodesource-source]
name=Node.js for Enterprise Linux 7 - $basearch - Source
baseurl=https://rpm.nodesource.com/pub_4.x/el/7/SRPMS
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/NODESOURCE-GPG-SIGNING-KEY-EL
gpgcheck=1
You can compile and install from its source.
ver=4.0.0
wget -c https://nodejs.org/dist/v$ver/node-v$ver.tar.gz #This is to download the source code.
tar -xzf node-v$ver.tar.gz
cd node-v$ver
./configure && make && sudo make install
https://github.com/nodejs/node-v0.x-archive/wiki/Installation
Try npm install n -g and then n latest for downloading it with this version manager.
Edit:
The official distributions are managed by Nodesource. For RHEL the setup is supposed to be (take from the repo):
Current instructions for installing, as listed on the Node.js Wiki:
Note that the Node.js packages for EL 5 (RHEL5 and CentOS 5) depend on the EPEL repository being available. The setup script will check and provide instructions if it is not installed.
Run as root on RHEL, CentOS, CloudLinux or Fedora:
curl -sL https://rpm.nodesource.com/setup | bash -
Then install, as root:
yum install -y nodejs
But be aware that 4.0 is currently not in their rpm distribution
This was my solution and it worked:
Distrubution url: Distr: https://nodejs.org/dist/v4.2.1/node-v4.2.1.tar.gz (v4.2.1 for now)
Unpack the package (tar Jxf node-v4.2.1.tar.xz).
Some package could be too old and will cause problems during installation.
cd to the unpacked file and run ”./configure”. if the warming “C++ compiler too old, need g++ 4.8 or clang++ 3.4” is displayed you need to execute the following commands:
curl http://linuxsoft.cern.ch/cern/scl/slc6-scl.repo > /etc/yum.repos.d/slc6-scl.repo
rpm --import http://ftp.mirrorservice.org/sites/ftp.scientificlinux.org/linux/scientific/51/i386/RPM-GPG-KEYs/RPM-GPG-KEY-cern
yum install -y devtoolset-3
And to utilize it without having to set environment variables execute this command:
scl enable devtoolset-3 bash
Now restart the process:
./configure
make
make install
You can try this solution.
First, update software repository to the latest versions:
yum -y update
Intall "Development Tools". It's a group of tools for compiling software from sources.
yum -y groupinstall "Development Tools"
Move to /usr/src directory - the usual place to hold software sources.
cd /usr/src
Now, we pick the latest compressed source archive from Node.js website at http://nodejs.org/download/.
wget http://nodejs.org/dist/v4.2.4/node-v4.2.4.tar.gz
tar zxf node-v4.2.4.tar.gz
cd node-v4.2.4
./configure
make
make install
Any installation or update using yum command I ended up error: Error: xz compression not available. On website I read that Python library is missing. When you try to install a library (sudo yum update pyliblzma) again failed with error. Do not know how? Thanks.
This problem comes if you installed a wrong epel release on your machine. If so, then you need to remove the epel release by
yum remove epel-release
Sometimes that is not enough, you need to remove the cache as well by:
rm -rf /var/cache/yum/x86_64/6/epel
Then you can install the epel-release again
yum -y install epel-release
You need install the EPEL repository by downloading the appropriate RPM package for your system and installing it. For example, for CentOS and Red Hat Enterprise Linux 6.x:
wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
sudo rpm -Uvh epel-release-6*.rpm
If you get a File Not Found error message when trying to download the package, the version number might have changed. You can access the latest version of the RPM installer from the Fedora EPEL wiki page. The wiki page also includes additional instructions for Red Hat Network subscribers who are installing the EPEL repository.
Finally, install the Python library:
yum install pyliblzma
This works perfecly in my CentOS 6.x.
I've found a solution on this page of stackexchange, working in CentOS 6.X:
https://unix.stackexchange.com/a/314756
sudo rpm -e epel-release-7-5.noarch
wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
sudo rpm -ivh epel-release-6-8.noarch.rpm
sudo yum clean all
sudo rpmdb -v --rebuilddb
sudo yum -y install libselinux-python
I was also suffering from this issue..
If you are installing packages but it is already available on your system.
Remove existing packages and then try to install new.
It will work properly...
I was able to solve this problem by installing pyliblzma using rpm instead of yum as yum is not working.
Find pyliblzma rpm package according to your architecture and install it using the command.
rpm -Uvh pyliblzma-version-release.architecture.rpm
I used the following command to install pyliblzma for my 64 bit Redhat 6.8 machine. Please check URL in the command and make changes accordingly.
rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/pyliblzma-0.5.3-3.el6.x86_64.rpm
In my case the issue was caused by missing modules in python's site-packages directory. Here's what I did:
$ rpm -Va
to get a list of all files belonging to all rpms that do not verify. I got a bunch of messages about missing modules:
missing /usr/lib64/python2.7/site-packages/...
Luckily, I had an identical CentOS version elsewhere with all these packages present, so I just copied them over and ran
$ rpmdb -v --rebuilddb
to rebuild rpm database.
I have tried to install the Xvfb on red-hat 6.5 using
yum -y install xorg-x11-server-Xvfb
but it is not installed and it is giving msg that
No package xorg-x11-server-Xvfb available.
Error: Nothing to do
Plese help me to install Xvfb on Redhat 6.5 to remove the headless exception in the Applet.
Thanks.
The xorg-x11-server-Xvfb package is officially available from RedHat for RHEL 6 and RHEL 7 under the Optional channel (RHEL Workstation Optional, or RHEL Server Optional).
From the comments: To enable the optional repo: subscription-manager repos --enable rhel-7-server-optional-rpms and then you can install the package with yum install xorg-x11-server-Xvfb
I was able to download the RPM and then install it locally after reading this article
wget http://vault.centos.org/6.2/os/x86_64/Packages/xorg-x11-server-Xvfb-1.10.4-6.el6.x86_64.rpm
yum localinstall xorg-x11-server-Xvfb-1.10.4-6.el6.x86_64.rpm
hello i have faced problem with libgcrypt and i am sure is is installed with newst version thats happen when i try to install libssh2
[root#loft1034 libssh2-1.1]#./configure
configure: error: cannot find OpenSSL or Libgcrypt,
try --with-libssl-prefix=PATH or --with-libgcrypt-prefix=PATH
[root#loft1034 libssh2-1.1]# locate libgcrypt
/usr/lib/.libgcrypt.so.11.hmac
/usr/lib/libgcrypt.so.11
/usr/lib/libgcrypt.so.11.5.2
/usr/lib64/.libgcrypt.so.11.hmac
/usr/lib64/libgcrypt.so.11
/usr/lib64/libgcrypt.so.11.5.2
[root#loft1034 libssh2-1.1]#
i try to using prefix path with no benefit please help me?
Install the package with the header files.
CentOS 6/7, perhaps Fedora:
sudo yum install -y libgcrypt-devel
Debian/Ubuntu:
sudo apt-get install -y libgcrypt11-dev
Try this (it works for Ubuntu 15.10 64 bit)
wget ftp://ftp.debian.org/debian/pool/main/libg/libgcrypt11/libgcrypt11_1.5.0-5+deb7u3_amd64.deb
sudo dpkg -i libgcrypt11_1.5.0-5+deb7u3_amd64.deb
If you are using centOS install libcrypt-devel:
sudo yum install libgcrypt-devel
For ubuntu(works for me)
Try to download the package first, download links, note choose the right architecture.
there take amd64 as an example.first we get the link address http://security.ubuntu.com/ubuntu/pool/main/libg/libgcrypt20/libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
On ubuntu, we download the package
wget http://security.ubuntu.com/ubuntu/pool/main/libg/libgcrypt20/libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
then install it
sudo dpkg -i libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
Maybe there are other dependencies need to install.
you can choose to install it one by one, or follow the tips
sudo apt --fix-broken install