Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 5 years ago.
Improve this question
I performed Poky build fetching the latest master branch from git
git clone -b rocko git://git.yoctoproject.org/poky.git
Set up the Environment using the following command
source poky/oe-init-build-env
Then executed bitbake command
bitbake core-image-full-cmdline
Bitbake did generate root file system, kernel image .. I was looking at the log files of the bitbake in build/tmp/log/cooker/qemux86 folder
There are two files with the same content:
- console-latest.log
- 20171224045428.log
Why we have two logs of the same content
console-latest.log is a symlink that points to the latest real console file 20171224045428.log. It allows to keep previous console logs and have an easy single way to access the latest console log.
In Yocto, a lot of log files work this way, see manual log section.
Related
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 7 months ago.
Improve this question
I am trying to install opencv on my raspberry pi 4 with raspian OS.
I am using this tutorial https://docs.opencv.org/3.4/d7/d9f/tutorial_linux_install.html and I have navigated to a build directory in my source directory /home/icetea/Desktop/working_dir/opencv/build
Then I execute this command:
cmake -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=/home/icetea/Desktop/working_dir/opencv
I get this error:
CMake Error: The source directory "/home/icetea/Desktop/working_dir/opencv/build" does not appear to contain CMakeLists.txt
It thinks the build dir is the source dir. My source dir does 100% contain that .txt file, but my build dir is empty. I have tried executing this command while in the source dir and I get this error:
FATAL: In-source builds are not allowed. You should create a separate directory for build files
Anybody have any insight?
Thank you very much
Smitty
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 7 years ago.
Improve this question
I'm very new to cmake, and in my cmake script(3.12) it happens, that the following commands are executed fine under windows
add_library(${LIB_NAME} STATIC ${SOURCES})
install(TARGETS ${LIB_NAME} DESTINATION lib)
but under linux (mint 17.2) the install routine is skipped and the lib folder is empty after calling make.
Q: What has to be changed, that lib.a is copied to the lib folder.
EDIT:
The LIB_NAME is created as follow
SET(PROJECT_NAME_STR System)
SET(LIB_NAME "${PROJECT_NAME_STR}_s")
Might well be that you do not have write permissions in the install target folder. What's the value of the destination variable and how are your permissions for that target?
I solved the "problem" myself. And now is the moment where you can throw tomatoes at me.
I forgot to call make install.
Sorry.
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 7 years ago.
Improve this question
Disclaimer: I'm a git newbie.
I followed the following post: Setting up your git repos the normal way (here on stackoverflow) to get a --bare repo set up at /home/www-data/themename.git and a post-receive hook working that copied everything to my /var/www/domain.com/htdocs/wp-content/themes/themename/ folder. (I followed the instructions on that post exactly). Everything was working perfectly.
However, today I wanted to take a look inside that post-receive hook and ran cat /home/www-data/themename.git/hooks/post-receive. If you didn't notice, I accidentally placed two spaces after cat instead of one. Which overwrote everything in the file rather than displaying it. Looking back, I should have just used nano. So I opened the post again, and copied the code snipped from the post and pasted it into my post-receive hook again. But now it doesn't do anything. The files aren't copied.
Thinking that maybe it was a permissions issue, I ran chown -R www-data:www-data on /var/www and that didn't work. I also ran chown -R www-data:www-data on /home/www-data and that also didn't work. Lastly I ran chmod +x /home/www-data/themename.git/hooks/post-receive to make the file executable in case it stopped being, and that also doesn't work.
Also, git pull still works correctly in the /var/www/domain.com/htdocs/wp-content/themes/themename/ directory.
Any suggestions to fix this? Or should I just create the repos and directories from scratch again?
This started working again after the server was rebooted.
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 4 years ago.
Improve this question
I'm trying to replace the contents of a github repository with the contents of a folder. I've tried git push, but it doesn't seem to do anything unless I add each of the files individually using the command line. Is there any command that I can use to replace the contents of the repository with the folder's contents?
My repository is here: https://github.com/jarble/downloadedModules
git add adds your modified files to the queue to be committed later
The following are the steps to add a file and push to the repository:
git add <file/folder>
git commit -m "Checkin in code"
git push -u origin master
For detailed explanation refer to this answer
Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 11 years ago.
Improve this question
I have a completely fresh install of 64 Bit Cent OS 5.7, this is in VirtualBox on top of 64-bit XP.
I'm trying to install SSU.
Problem: The command 'git' was not found. See "code" below please.
Have tried looking this up: /usr/local/git/ does not exist: git: command not found (on OS X 10.5)
I don't care about source code: I just want git to work so SSU will install so I can try to access the bank on what seems like a huge whim.
I am signed in to Gnome as root and seem to be able to access my computer normally without being harassed about passwords excessively and can create or edit files.
[root#localhost ~]# $ git clone https://github.com/wesabe/ssu
bash: $: command not found
Concerns
Unfortunately every single time I ask these kinds of questions and don't make clarifications I end up having to make those clarifications. So...
No negativity or rudeness intended what-so-ever: if the answer involves editing a text file or copy-and-paste actions please tell me the locations to do so in the file manager instead of console commands. I'm perfectly okay copying and pasting console commands for things that really should be done in the console though.
Note: there appear to be numerous "git" commands and numerous "ssu" commands. I do NOT know the difference between them and would really prefer someone who has solid expertise to answer so that I nor others end up accidentally trashing our copies of Linux as it's been very difficult to get anything to work and stay working thus extending my personal stay with XP.
I will be more than happy to both accept an answer and thumbs it up should it be helpful.
I would first try installing git. As root:
yum install git
According to here,
yum install git-core
If that doesn't work you could add the EPEL source. There are also RPMs for git.