How do I get the full product path when clicking it from latest module or search results, let me explain a bit more:
breadcrumbs are Home > Product Name instead of Home > Category > Product Name
The products listed in the latest module. When I click on one of them it takes me to the product page without the category id and it does the same for the search.
Related
I want to see the properties of Coffees and Brewers tried to get to Fields but I couldn't.
The pictures explain what I meanenter image description here
But I can find Home section easily
enter image description here
The properties of products are defined in the Modules application under Modules > E-commerce > SKU > Fields. The exact fields for a general product form are in the Alternative Forms > Product - General properties form.
I'm new to suite commerce and I couldn't find page source.
Clicking a tag it goes to page.
Here a tag is.
CONTACT
Where could I find page source?
The URL indicates that you are trying to find the template that lays out Information Item with Internal Id 51.
So in Netsuite:
go to Lists -> Website -> Information Items -> Search
use "Advanced Search" with criteria to find Internal Id (Number) is 51.
If you are just trying to change the html then one of the info item's description fields may be what you need to edit.
If you are trying to get to the markup then check if that item has an "Item DrillDown Template". If it does then go to Setup -> Site Builder -> Item/Category Templates and find and edit the referenced template.
Otherwise you need to find the Info Item Drilldown template. This could be specified at the web site level or at on the web site's theme.
I'm having a problem with the product list configuration of hybris. I'm more than sure that the answer of this issue is pretty simple, but I can't solve it. So here is the problem.
I have one homepage with one link, assigned to the navigation bar. Whenever the link is pressed I want to get redirected to a product list page where a list of all products of certain category will be displayed. However, I managed to do this, but anytime I change the name of a certain product something happens and the page stops displaying. It throws an error saying it is looking for the old name of the product I've edited.
For example, if the product name is Product1, the page is displayed, then I go and change the name to Product2 and when I press on the link, it throws an error Product with code 'Product1' not found! If I want this to be fixed, I have to create a new Product1 and I'm more than sure that this is not the right way it should work. Is there any synchronization that I need to do after making changes in the catalog or something of this kind? Any help will be appreciated!
I recommend you try two things that may resolve your issue.
When you make a change to a product, you will more than likely do it to the staged catalog. This is your intermediary to ensure information is correct before going live (especially useful if you have a workflow process in place). In order to synchronise this information, you will need to login to the product cockpit (your-server:9000/productcockpit). Find the staged version of the catalog on the left hand menu, right click on it, and select "Sync Selected Versions". This will transfer your information into the Online catalog.
When you arrive on the product listings page and the search results page, the information contained is more than likely indexed by SOLR. In order for any changes to be reflected, you will need to re-index. To do this:
Go to the HMC and login (your-server:9000/hmc/hybris)
In the navigation menu to the left, click on System > Facet Search > Indexer Operation Wizard
A pop-up window will appear. Select the Indexer operation as update and the Solr configuration to the index associated with your website.
Click start and the re-indexing will begin. It shouldn't take too long
If this fails, then you may need a full re-index instead
I hope this will help; I recommend you set up a Cronjob to re-index periodically in future, to keep your website up to date with your product management.
PLP(Product Listing Page) fetches data from Solr. So whenever you are changing anything that is referred in the PLP, you need to update your indexes in Solr.
As you have changed the product name, update the Solr index from hmc.
I have a very complex problem (at least i think so) implementing a custom module in Magento. I have created a module that displays products of a single main category in default catalog. For example,
root catalog
-main category
-cat 1
-cat 2
-sub category 1
-cat 3
So what i need to do is, display all these categories in a drop down list and when you select any one category all its products will be loaded. Seemed pretty strait forward. I added the code to display this sort by category drop down list in my module's list.phtml file. Instead of loading default product collection I loaded the main category and then fetched all its sub category and populated the drop down list. And I fetched the product collection of the selected category from the drop down list. My code is like this:
$baseCategory = Mage::getModel('catalog/category')->load(62);
$_productCollection = $baseCategory->getProductCollection()->addAttributeToSelect('*');
The products are loaded alright but the problem arises with pagination. the code for pagination goes like this:
$this->getToolbarHtml();
I have used the $this->getToolbarHtml(); instead of $this so in pagination also I need to change the object. It's not working due to that I think. The toolbar is shown but regardless of number of products per page selected it always displays all products. Can anyone tell me please how to get the toolbar working with my changed code in list.phtml file?
I've found a different approach to the task i wanted to accomplish. So instead of creating a new module i created a new theme and so just overridden the list.phtml file. There is no need to use the above code anymore. And since i am using the default catalog object the pager is also loaded alright.
Hi
I have not using any shopping cart module, just created a content type (product) and defining several field(attribute) for each product feature.
I want to ask is there any module in Drupal for product comparison or field comparison?
Thanks
No, but there is a way to do it with the Flag module and Views. It will take more work than just turning on a module, but the outcome is the standard product comparison you're looking for. See this article.
The article is no longer online: here the content of the original post.
Ubercart Product Comparison
For me, using Ubercart in Drupal as an e-commerce solution for your website is the way to go. I have been using Ubercart for years now for a number of web design and development projects, and there are a massive amount of contribute modules to beef it up. One feature that I have been keen to work on is a Product Comparison feature, which would allow users to select products and have them display on a page, providing them with a nice and easy layout to easily compare their selected products.
After searching around the web, I found a few articles and posts from people looking for this feature, asking how it could work or if anyone had done it, but couldn’t find anything that said “here it is, this is how it can be done”. So, after a little bit or research and a bit of a play, I have come up with a solution which is not that difficult to achieve and only requires some already existing Drupal modules with just a few tweaks.
Note: This tutorial assumes that you already have a working ecommerce site with Ubercart installed. Best to also try this on a test environment and not a live website.
Step 1. Download Required Modules
Download, install and enable the following modules.
Views (I used 6.x-2.11, I haven’t tested it with any other releases)
Flag (I used 6.x-2.0-beta3, I haven’t tested it with any other releases)
Step 2. Flags configuration – Setting up your “compare”
Once you have enabled the Flags module, go to the flags administration page at /admin/build/flags.
Click the Add link, enter the name of your flag (something like “compare”), and leave the flag type as “node”, and submit.
On the next screen you will need to configure your new flag. Complete the following fields (changing the values if you like). I setup my configuration so only registered users of the website could compare products.
Title – Compare Products
Flag link text – Add to compare
Flagged message - [title] has been added to your compare
Unflag link text – Remove from compare
Unflagged message – [title] has been removed from your compare
Flaggable content – Product
Check “Display login link for anonymous users.” and for anonymous link text add “[login] to add to your compare”
For flag access, check flag and unflag for authenticated users
Under Display options select “Display link on node page” and “JavaScript toggle” as link type
Click submit to save your flag.
With the settings we used, the “flag link text” should now display on your product nodes. Clicking it should make the “flagged message” appear and the link changed to your “unflag link text” using JavaScript.
So what we are doing here is just flagging nodes – it’s actually pretty simple. We are flagging/unflagging them as “compare product”, so you should now be able to (by clicking on the link provided on your products) add and remove products to compare on your website.
Now we have done this, we need to create a page to display our “flagged” products, in which this case is the products we want to compare.
Step 3. Creating out Compare Products Page
Go to the Views Administration page, enabling the Flag module creates a default flag view. You can use this as a reference, or even change this view to what you need, it’s totally up to you. All we need is a view with (at least) the settings explained below.
DEFAULTS
Basic Settings – Use at least the following settings
Title: Product Comparison
Style: Table
Items per page: Unlimited
Access: Authenticated user
Empty text: Full HTML
- You have not yet added any products to compare. Click the “Add to compare” link when viewing a product to add it to this page.
Relationships
Add the following relationship:
Flags: Node flag
- label: compare
- check “Include only flagged content”
- flag: select the flag you created in step 2
- by: current user
Fields – You can put whatever fields here you would like to show up against each product. You must include the Node Title, and ideally you would want to show a thumbnail of the product, its price and description and the unflag link to allow users to remove it from this page. I have the following fields for my compare:
Content Image using an imagecache, linking to product
Node: Title linking to product
Flags: Flag link
- Relationship: select the one you added
Product: Sell Price
Node: Teaser
Filters
Node: Published Yes
AND SAVE
Now add a new page display view and give it a URL, then save. Navigate to your new compare page using the URL you entered. If you haven’t “flagged” any products yet, go do so and once done you should see those products displayed on your Compare Products page!!!
But, there is one slight issue. Because we needed to use Style: Table to get the layout to better suit a compare list, it still doesn’t display it the way we need it too. We want to display each of the products horizontally, with each field label shown on the far left so it is easy to compare our products. To do this we need to retheme the table style for our view.
Step 4. Theme the table output of the view
Under Theme: Information for our view, it displays a list of all the possible templates for the display plugin and for the style plugins. Look for the list titled Style output. This is what we want. It lists the possible templates we can use to change the theming of the style output. The first one it displays is the generic template for the table style output but we don’t want to use this one, because if we do we could effect any other table style view that may be on the site. So best to use the next one across, mine was called views-view-table–flag-compare.tpl.php.
Create a new php file and name the file to the template name you want to use. In my case my file is named views-view-table–flag-compare.tpl.php.
Paste the Drupal 6 code from here http://drupal.org/node/174578 into your template file.
Then place the file in your themes directory – and presto! Your comparison table should be laid out more like a comparison style grid. Below is a screenshot of what my Comparison page looks like after a little bit of extra styling.
Try this module: https://drupal.org/project/comparison
Allows the comparison of the attributes of two or more nodes by generating a table. A checkbox is added to nodes to allow them to be included in the comparison. If two or more nodes are selected a link is added to a page with a comparison table.