If cells G8 or A11:A29 are clicked, I want a pop up calendar to pop up and place the date within that/those selected cell(s). We will want to use the pop up calendar on other files and other users' PCs, though the files will vary in where we want the cells to display the pop up calendar. Would an add in be used for this or can I simply figure out the code and include it in other workbooks? I had five users counting myself that could run my new file without issue but there are at least three users who get a "Could not load an object because it is not available on this machine" error message when clicking within the specified cells. Some of the links I used: Extend Office VBA Express Font Stuff
Code In sheet 1:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error Resume Next
If Not Intersect(Target, Range("A11:A29")) Is Nothing Then frmCalendar.Show
If Not Intersect(Target, Range("G8")) Is Nothing Then frmCalendar.Show
End Sub
Code in Module 1: (Not even sure I need this. I think this was originally because I had buttons)
Sub OpenCalendar()
frmCalendar.Show
End Sub
Code in frmCalendar:
Private Sub cmdClose_Click()
Unload Me
End Sub
Private Sub MonthView1_DateClick(ByVal DateClicked As Date)
On Error Resume Next
Dim xRg As Object
For Each xRg In Selection.Cells
xRg.Value = DateClicked
Next xRg
Unload Me
End Sub
Private Sub UserForm_Initialize()
If IsDate(ActiveCell.Value) Then
Me.MonthView1.Value = ActiveCell.Value
End If
End Sub
I truly appreciate any and all help or point in the right direction! Cheers!
Related
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub
So, I'm kind of an amateur at VBA.
I'm doing an userform for many users to use at my company.
I need the user to pick a Date.
First, I tried with DTPicker, but that didn't work on the other computer I tried, so my collegue suggested I used a MonthView instead.
I put it in the form, dropping it from the Toolbox, and used this simple code:
Private Sub UserForm_Initialize()
MonthView1.Value = Date
End Sub
Private Sub cmdClose_Click()
Unload Me
End Sub
Private Sub MonthView1_DateClick(ByVal DateClicked As Date)
On Error Resume Next
Dim cell As Object
For Each cell In Selection.Cells
cell.Value = DateClicked
Next cell
Unload Me
End Sub
Worked perfectly.
Then I tried to open the file in another computer and got the 'some objects are not available, blah blah' message. The calendar didn't show up even though I tried registering the OCX file and stuff, and I even could put a new MonthView calendar in the form, but the "existing" one didn't load.
Sooo, I tried adding the object with code, to try and avoid this, I used this code:
Private Sub UserForm_Initialize()
Dim PruebaCal As Object
Set PruebaCal = Controls.Add("MSComCtl2.MonthView.2", "PruebaCal")
PruebaCal.Value = Date
End Sub
Private Sub cmdClose_Click()
Unload Me
End Sub
Private Sub PruebaCal_DateClick(ByVal DateClicked As Date)
On Error Resume Next
Dim cell As Object
For Each cell In Selection.Cells
cell.Value = DateClicked
Next cell
Unload Me
End Sub
This worked for the 'some objects are not available' problem, it loaded perfectly in both computers, but the Click event is not working and I have no idea how to fix that, maybe when adding controls with code the triggering events are different? I don't know.
I am having a problem with Excel crashing, when I run VBA code on an excel sheet.
I'm trying to add the following formula on worksheet change:
Private Sub Worksheet_Change(ByVal Target As Range)
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
When this code is run i get a message saying "excel has encountered a problem and needs to close" and excel closes.
If I run the code in the Worksheet_Activate() procedure, it works fine and doesn't crash
Private Sub Worksheet_Activate()
Worksheets("testpage").Range("A1:A8").Formula = "=B1+C1"
End Sub
But I really need it to work in the Worksheet_Change() procedure.
Has anyone experienced similar crashes when using the Worksheet_Change() event and can anyone point in the right direction to fix this issue ?
I recommend this when using Worksheet_Change
You do not need the sheet name. In a Sheet Code Module, an unqualified Range reference refers to that sheet. That said, it is clearer to use the Me qualifier. If you are trying to use another sheet, then qualify the range reference with that sheet.
Whenever you are working with Worksheet_Change event, always switch Off events if you are writing data to any cell. This is required so that the code doesn't retrigger the Change event, and go into a possible endless loop
Whenever you are switching off events, use error handling to turn it back on, else if you get an error, the code will not run the next time.
Try this
Private Sub Worksheet_Change(ByVal Target As Range)
On Error GoTo Whoa
Application.EnableEvents = False
Me.Range("A1:A8").Formula = "=B1+C1"
Letscontinue:
Application.EnableEvents = True
Exit Sub
Whoa:
MsgBox Err.Description
Resume Letscontinue
End Sub
Few other things that you may want to know when working with this event.
If you want to ensure that the code doesn't run when more than one cell is changed then add a small check
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2003
If Target.Cells.Count > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
The CountLarge was introduced in Excel 2007 onward because Target.Cells.Count returns an Long value which can error out in Excel 2007 becuase of increased total cells count.
Private Sub Worksheet_Change(ByVal Target As Range)
'~~> For Excel 2007
If Target.Cells.CountLarge > 1 Then Exit Sub
'
'~~> Rest of code
'
End Sub
To work with all the cells that were changed use this code
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aCell As Range
For Each aCell In Target.Cells
With aCell
'~~> Do Something
End With
Next
End Sub
To detect change in a particular cell, use Intersect. For example, if a change happens in Cell A1, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1")) Is Nothing Then
MsgBox "Cell A1 was changed"
'~~> Your code here
End If
End Sub
To detect change in a particular set of range, use Intersect again. For example, if a change happens in range A1:A10, then the below code will fire
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("A1:A10")) Is Nothing Then
MsgBox "one or more Cells in A1:A10 range was changed"
'~~> Your code here
End If
End Sub
Note: If you were getting an error earlier and you made the above changes and If your code is still not working then it is possible that the events have not been reset. In the Immediate Window, type Application.EnableEvents = True and press the ENTER key. This will reset it to True. If you do not see the Immediate Window, the press the shortcut key Ctl+G to launch the Immediate Window.
Excel was crashing, not the VBA function.
The events were not disabled and the call stack was filled by an infinite loop of OnChange events.
A little advice that helps finding this type of errors: set a breakpoint on the first line of the event, then execute it step by step pressing F8.
Also this solution is good:
Option Explicit
Private Busy As Boolean
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Busy Then
Busy = True
Range("A1:A8").Formula = "=B1+C1"
Busy = False
End If
End Sub