I want to know if there is any way to auto-commit changes made in git based on specific time.
Suppose if I set the configuration, it should commit whatever the code present in repository at exactly 12:00 AM every day or at specific time in a day.
From what I found after searching, there is a way to commit on every time we save a file. But not timely auto-commits.
As Nic5300 suggested, an easy way to do this is to write a simple script that is called by cron at a specific time:
auto_commit.sh
=======================================
#!/bin/bash
MESSAGE="Auto-commit: $(date)"
REPO_PATH="/home/user/repo"
git -C "$REPO_PATH" add -A
git -C "$REPO_PATH" commit -m "$MESSAGE"
Just update the REPO_PATH and MESSAGE with whatever you'd like. Now, you add the script to your crontab by running crontab -e.
To run it every night at midnight, your crontab would look like this:
* 0 * * * auto_commit.sh > /dev/null 2>&1
Obviously, you'd have to update that path to wherever your script is saved. Just make sure you have cron running (depends on what init system you're using), and you should be good to go. Check out https://crontab-generator.org if you want to fiddle more with your crontab.
Your crontab example would start executing the auto_commit.sh script at midnight every minute for 1 hour. To make it run only once every midnight, you need:
0 0 * * * auto_commit.sh > /dev/null 2>&1
Related
I've modified the crontab with:
sudo crontab -e
and added a cron for a script to run every minute so I can test if it works:
1 * * * * /scripts/backup-script.sh > /scripts/backup-script.logs
Afterwards, I tried to restart the cron service to restart the server but the cron doesn't seem to be working, I tried to use:
crontab -l
and it appears to have the old content as if I didnt even modify it. However, going into crontab -e does show the updated content.
To make your script run every minute your cron record must be:
* * * * * /scripts/backup-script.sh > /scripts/backup-script.logs
What you enter will run every 1st minute every hour
And if you add record via crontab command you do not need to touch cron daemon
To see the cron record you add with sudo crontab -e you must check it with command sudo crontab -l. Otherwise you list cron record of different user
Basic information about my system: I have a music system where people can schedule songs to start and end at a specific time.
OS: Arch linux
It sets two crons at the moment. One lets say at 1.50 (start time with a command like "play etc") and another set at 3.20 (end time with a command like "end etc").
My setup works perfectly and i can end delete schedules etc etc but i now noticed an issue! If i set the above times and turn the system off (My system is a raspberry pi) and turn back on at lets say 2.00 and i missed the 1.50 deadline, the music doesnt start (obviously) and i want to try make it so no matter what time i turn it on within a range lets say: 1.50 - 3.20 it will start the play command. But it will run the command once!
I looked around and the commands i got was like:
0 1.50-3.20/2 * * * your_command.sh
But thats to run every 2 hours. I want it to run once only between these times?
Thanks!
You could add an additional cron job which starts a script on every reboot. For instance, you could add a line like this to your crontab:
#reboot /home/pi/startplayback.sh
Your startplayback.sh script should check if current time is within the desired period and run the desired command if it is. For example the code below will print PLAY! if the script is run between 1:50 and 3:20. You could replace echo 'PLAY!' by run WHATEVER
#!/bin/bash
current=$(date '+%H%M')
(( current=(10#$current) ))
((current > 150 && current < 320 )) && echo 'PLAY!'
P.S. Don't forget to make your script executable sudo chmod +x startplayback.sh
You might want to look at the at command and its utilities.
SYNOPSIS
at [-q queue] [-f file] [-mldbv] time
at [-q queue] [-f file] [-mldbv] -t [[CC]YY]MMDDhhmm[.SS]
at -c job [job ...]
at -l [job ...]
at -l -q queue
at -r job [job ...]
atq [-q queue] [-v]
atrm job [job ...]
batch [-q queue] [-f file] [-mv] [time]
at is good for scheduling one time jobs to be run at some point in the future. It maintains a queue of these jobs, so you can use it to schedule things with a great variety of different time specifications.
Cron is in my opinion a scheduler for jobs that are to be repeated over and over.
So a quick and dirty example for you:
echo 'ls -lathF' | at now + 1 minute
As expected you will see a job to be run in one minute. Try atq to see the list of jobs.
When the job is done, output will be mailed to your user by default.
I solved the issue by creating a PHP file and load the page on reboot then do its work and redirect back to such and such.
I am trying to make a cron job for the first time but i have some problems making it work.
Here is what i have done so far:
Linux commands:
crontab -e
My cronjob looks like this:
1 * * * * wget -qO /dev/null http://mySite/myController/myView
Now when i look in:
/var/spool/cron/crontabs/
I get the following output:
marc root
if i open the file root
i see my cronjob (the one above)
However it doesnt seem like it is running.
is there a way i can check if its running or make sure that it is running?
By default cron jobs do have a log file. It should be in /var/log/syslog (depends on your system). Vouch for it and you're done. Else you can simply append the output to a log file manually by
1 * * * * wget http://mySite/myController/myView >> ~/my_log_file.txt
and see what's your output. Notice I've changed removed the quiet parameter from wget command so that there is some output.
I want to get the details of the last run cron job. If the job is interrupted due to some internal problems, I want to re-run the cron job.
Note: I don't have superuser privilege.
You can see the date, time, user and command of previously executed cron jobs using:
grep CRON /var/log/syslog
This will show all cron jobs. If you only wanted to see jobs run by a certain user, you would use something like this:
grep CRON.*\(root\) /var/log/syslog
Note that cron logs at the start of a job so you may want to have lengthy jobs keep their own completion logs; if the system went down halfway through a job, it would still be in the log!
Edit: If you don't have root access, you will have to keep your own job logs. This can be done simply by tacking the following onto the end of your job command:
&& date > /home/user/last_completed
The file /home/user/last_completed would always contain the last date and time the job completed. You would use >> instead of > if you wanted to append completion dates to the file.
You could also achieve the same by putting your command in a small bash or sh script and have cron execute that file.
#!/bin/bash
[command]
date > /home/user/last_completed
The crontab for this would be:
* * * * * bash /path/to/script.bash
/var/log/cron contains cron job logs. But you need a root privilege to see.
CentOs,
sudo grep CRON /var/log/cron
I'm using a basic shell script to log the results of top, netstat, ps and free every minute.
This is the script:
/scripts/logtop:
TERM=vt100
export TERM
time=$(date)
min=${time:14:2}
top -b -n 1 > /var/log/systemCheckLogs/$min
netstat -an >> /var/log/systemCheckLogs/$min
ps aux >> /var/log/systemCheckLogs/$min
free >> /var/log/systemCheckLogs/$min
echo "Message Content: $min" | mail -s "Ran System Check script" email#domain.com
exit 0
When I run this script directly it works fine. It creates the files and puts them in /var/log/systemCheckLogs/ and then sends me an email.
I can't, however, get it to work when trying to get cron to do it every minute.
I tried putting it in /var/spool/cron/root like so:
* * * * * /scripts/logtop > /dev/null 2>&1
and it never executes
I also tried putting it in /var/spool/cron/myservername and also like so:
* * * * * /scripts/logtop > /dev/null 2>&1
it'll run every minute, but nothing gets created in systemCheckLogs.
Is there a reason it works when I run it but not when cron runs it?
Also, here's what the permissions look like:
-rwxrwxrwx 1 root root 326 Jul 21 01:53 logtop
drwxr-xr-x 2 root root 4096 Jul 21 01:51 systemCheckLogs
Normally crontabs are kept in "/var/spool/cron/crontabs/". Also, normally, you update it with the crontab command as this HUPs crond after you're done and it'll make sure the file gets in the correct place.
Are you using the crontab command to create the cron entry? crontab to import a file directly. crontab -e to edit the current crontab with $EDITOR.
All jobs run by cron need the interpreter listed at the top, so cron knows how to run them.
I can't tell if you just omitted that line or if it is not in your script.
For example,
#!/bin/bash
echo "Test cron jon"
When running from /var/spool/cron/root, it may be failing because cron is not configured to run for root. On linux, root cron jobs are typically run from /etc/crontab rather than from /var/spool/cron.
When running from /var/spool/cron/myservername, you probably have a permissions problem. Don't redirect the error to /dev/null -- capture them and examine.
Something else to be aware of, cron doesn't initialize the full run environment, which can sometimes mean you can run it just fine from a fully logged-in shell, but it doesn't behave the same from cron.
In the case of above, you don't have a "#!/bin/shell" up top in your script. If root is configured to use something like a regular bourne shell or cshell, the syntax you use to populate your variables will not work. This would explain why it would run, but not populate your files. So if you need it to be ksh, "#!/bin/ksh". It's generally best not to trust the environment to keep these things sane. If you need your profile run the do a ". ~/.profile" up front as well. Or a quick and dirty way to get your relatively full env is to do it from su as such "* * * * * su - root -c "/path/to/script" > /dev/null 2>&1
Just some things I've picked up over the years. You're definitely expecting a ksh based on your syntax, so you might want to be sure it's using it.
Thanks for the tips... used a little bit of each answer to get to the bottom of this.
I did have the interpreter at the top (wasn't shown here), but may have been wrong.
Am using #!/bin/bash now and that works.
Also had to tinker with the permissions of the directory the log files are being dumped in to get things working.