hello.
i need to help. i want to mounting drive D in ubuntu 16.04.BUT
my partition is ntfs format. (Drive C & D)
I had Installed Windows 7 on my computer, but then I Deleted It and Installed Ubuntu 16.04, but i just repartition the drive C. and did not change the drive D partition.
means that i changed C partitioning and partitioned it for Ubuntu OS(like home & swap & root). partition of D is constant. so D partitions did not change.(D partition is NTFS)
partitioning for ubuntu in C
When Ubuntu installed, i wanted to open my D drive (ntfs) but get the following error:
this message show when i want to open drive
and when mounting in terminal give me this message:
`root#mjb:/home/mjb# mount -t "ntfs" /home
Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which
could be identified for example by the help of the 'fuser' command.`
and this:
sudo mount -t ntfs-3g /dev/sda5 /dummy
[sudo] password for mjb:
The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sda5': Operation not permitted
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.
I test this solution:
open Terminal
type this command sudo -mount -t ntfs -r /dev/sda5 and then enter
then the partition mounted but i have a new problem:
the partition is read only because i type in command -r
ubuntu told me in the error message that: you can mount partition read only.
my question is: does exist any command for mounting partition in the form of read/write.
Open Disks
Select the partition you are not able to mount then turn off automatic mounting options, unselect mount at startup & write ro after comma as shown in the image & now you should be able to mount the disk succesfully.
seems like your windows is locking your HD before shutting down.
This happens when you try to acess the HD that windows is installed on from another OS, because on shutdown, windows locks the acess to the HD because by doing this, it can gain some performance on resuming Windows the next time you boot it.
So, simply try rebooting your windows before going to linux, if you shutdown Windows and then turn your PC directly into any other SO you wont be able to acess the HD/partition Windows has acess to.
Try Shift+shutdown in windows, then boot to Ubuntu os. It will mount all drives
Related
So I had to upgrade my system from 11.1 to 12.0 and now the system does not load. Stop on error Trying mount root zfs - Error 2 unknown filesystem.
And I do not have an old kernel which was good and worked well.
So How to fix mount problem?
Had tried to boot with the old kernel, but after one of the tries to freebsd-update upgrade there left only new kernel.
Expected no problems after the upgrade.
Actual - cannot load the system with Error 2 - unknown filesystem
P.S.
Found that /boot/kernel folder does not contain opensolaris.ko module.
How to copy this module to /boot partition on the system from LiveCD (this file exist on LiveCD)
Considering you have a FreeBSD USB stick ready... you can import the pool into a live environment and then mount individual datasets manually.
Considering "zroot" is your pool name
# mount -urw /
# zpool import -fR /mnt zroot
# zfs mount zroot/ROOT/default
# zfs mount -a // in case you want datasets to mount
# cd /mnt
Now do whatever you want...
You can also rollback to the last working snapshot (if there is any)
In case, your system is encrypted, you need to decrypt it first.
Agenda: To have an common Project Folder between Linux and Windows
I have changed my document root from : /var/www/html to /media/mithun/Projects/test in my ubuntu machine 14.04
I get error as :
Forbidden
You don't have permission to access / on this server.
Apache/2.4.7 (Ubuntu) Server at localhost Port 80
So i added some scripts to : sudo gedit /etc/apache2/sites-available/000-default.conf
# DocumentRoot /var/www/html
DocumentRoot /media/mithun/Projects/test
But Document Root /var/www/test works but not with Windows NTFS Partition Drive.
Even after referring to :
Error message "Forbidden You don't have permission to access / on this server"
Issue with my Ubuntu Apache Conf file. (Forbidden You don't have permission to access / on this server.)
No success :( So kindly assist me with it...
Note: Projects is an New Volume (Internal Drive: In Windows its E:/ Drive)
#Lmwangi - Please check my updates for your reference below:
Output of : ls /etc/apparmor.d/
abstractions lightdm-guest-session usr.bin.evince usr.sbin.cupsd
cache local usr.bin.firefox usr.sbin.mysqld
disable sbin.dhclient usr.lib.telepathy usr.sbin.rsyslogd
force-complain tunables usr.sbin.cups-browsed usr.sbin.tcpdump
I tried killing apparmor:
sudo /etc/init.d/apparmor kill
I receive output as : Usage: /etc/init.d/apparmor
{start|stop|restart|reload|force-reload|status|recache}
After this, i was also able to restart apache successfully
maybe the problem is simple : is your new root directory accessible to the www-data user ?
Try :
$ chown -R www-data:www-data /media/mithun/Projects
As you have you have discovered by now, you cannot just manipulate permissions on an NTFS partition (using tools like chmod)
However, you can try forcing a given owner/permissions for the entire partition when you mount it.
Now the wayto do this, depends on the NTFS-utilities you are actually using (and which i don't know, so I'm assuming you are using ntfs-3g)
E.g. mount the partition with the following parameters (replace dev/sdX with your actual partition, and /path/to/wheredrive/is/mounted` with your target path):
mount -o gid=www-data /dev/sdX /path/where/the/drive/is/mounted
should make all the files on the partition belong to the www-data group.
If the filesystem sets the group ownership explicitely, this still might not work.
In this case, you might need to setup a usermap, that maps your windows users/groups (as found on the partition) to your linux users/groups.
The ntfs-3g.usermap utility will help you generate an initial usermap file, which you can then edit to your needs:
ntfs-3g.usermap /dev/sdX
Then pass the usermap to the mount options:
mount -o usermapping=/path/to/usermap.file /dev/sdX /path/where/the/drive/is/mounted
I suspect that you have apparmor enforcing rules that prevent Apache from reading non-whitelisted directory paths. I suggest that you
Edit the apparmor config for Apache to access your custom path. You'll need to hunt around /etc/apparmor.d/ . You may also find that using apparmor in non-enforcing mode helpful.
$ sudo aa-complain /etc/apparmor.d/*
Use mod_apparmor? See this
Or disable apparmor completely. See this
My order of preference would be 1,3,2. That should fix this for you :)
While using ubuntu with windows I faced same issue and it is resolved by remounting drive with read and write access. Below command will help you to do that:
sudo mount -o remount,rw /disk/location /disk/new_location
If it is still not working then in windows os, go to the power options and disable fast startup.
When you shut down a computer with Fast Startup enabled, Windows locks down the Windows hard disk. You won’t be able to access it from other operating systems if you have your computer configured to dual-boot. Even worse, if you boot into another OS and then access or change anything on the hard disk (or partition) that the hibernating Windows installation uses, it can cause corruption. If you’re dual booting, it’s best not to use Fast Startup or Hibernation at all.
Original article: https://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/
I want to mount a folder which is on some other machine to my linux server. To do that i am using the following command
mount -t nfs 192.xxx.x.xx:/opt/oracle /
Which is executing with the following error
mount.nfs: access denied by server while mounting 192.xxx.x.xx:/opt/oracle
Do anyone knows what's going on ??? I am new to linux.
Depending on what distro you're using, you simply edit the /etc/exports file on the remote machine to export the directories you want, then start your NFS daemon.
Then on the local PC, you mount it using the following command:
mount -t nfs {remote_pc_address}:/remote/dir /some/local/dir
Please try with your home directory as per my knowledge you can't dump anything directly on root like that.
For more reference, find full configuration steps here.
I am trying to mount a volume on a RHEL 6.4 virtual machine permanently.
My fstab entry is as:
172.17.4.228:/bp_nfs_test1 /mnt1 nfs rsize=8192,wsize=8192,intr
And I mounted the volume as:
mount 172.17.4.228:/bp_nfs_test1 /mnt1
When I run df -h I can see the volume and able to access it properly.
But when I reboot the VM, the mount is gone and not able to access it anymore even though the entry in /etc/fstab is present
I have to manually mount the volume again (mount -a), then only I am able to see my volume in df -h and access it.
Any help is appreciated
The mount process on boot is very early, so your network won't be online thus preventing the nfs share from being mounted. You'll need to enable netfs, which manages network file shares, and runs after the network is up. Your desired process is:
Standard mounts processed.
NFS share is skipped during initial mounts (by adding _netdev to options).
After network is online, netfs will process network file systems like nfs and bring them online.
To prevent automounter for attempting to mount your nfs share before the network services are available, add _netdev to your options:
172.17.4.228:/bp_nfs_test1 /mnt1 nfs rsize=8192,wsize=8192,intr,_netdev
Enable netfs:
chkconfig netfs on
Alternatively, you could also configure the share through the /etc/auto.master configuration and have it mount when the share is accessed.
I am running Linux (Lubutu 12.10) on an older machine with a 20GB hard drive. I have a 1 TB external hard drive with an NTFS partition on it. On that partition, there is www directory that holds my web content. It is auto-mounted at startup as /media/t515/NTFS.
I would like to change the apache document directory from /var/www to /media/t515/NTFS/www.
I need to keep the partition as an NTFS partition, because I use the same hard drive on a different machine running WAMP.
I changed the file "default" in /etc/apache2/sites-available to the new location, and restarted the server. When I tried to go to local host, I got the error:
403 Forbidden
You don't have permission to access / on this server.
I then changed the automount options in fstab to include the option "umask=0000", and then to "umask=2200", both to no avail. I still get the same error message.
I can access the NTFS partition with no problem from other applications, and when logged in as any user. But Apache seems to be unable (or unwilling) to access the partition. How do I give apache permission to use a directory on an NTFS partition?
After many many attempts here is what succeeded for me and nothing else that is : changing the configuration of Apache so that it uses www-data (Apache user) no more but my own user instead.
Very simple to do. In my version of Apache the two lines to be changed are in the /etc/apache2/envvars file (it can be another file in another version) :
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
I replaced www-data by my user name (here toto :)) :
export APACHE_RUN_USER=toto
export APACHE_RUN_GROUP=toto
In my experience I've always had to remount the drive with RW permissions. found this:
sudo mount -t ntfs -o rw,auto,user,fmask=0022,dmask=0000 /dev/whatever /mnt/whatever
or:
For NTFS partitions, use the permissions option in fstab.
First unmount the ntfs partition.
Then edit /etc/fstab
Graphical gksu gedit /etc/fstab
Command line sudo -e /etc/fstab
Identify your partition UUID with blkid
sudo blkid
And add or edit a line for the ntfs partition
# change the "UUID" to your partition UUID
UUID=12102C02102CEB83 /media/windows ntfs-3g auto,users,permissions 0 0
Make a mount point (if needed)
sudo mkdir /media/windows
Now mount the partition
mount /media/windows
The options I gave you, auto, will automatically mount the partition
when you boot and users allows users to mount and umount .
You can then use chown and chmod on the ntfs partition.
Both found here: https://askubuntu.com/questions/11840/how-to-chmod-on-an-ntfs-or-fat32-partition
None of the answers above solve the issue, in fact, the problem is related to Apache itself, not filesystem or permissions.
The only thing you need to do is :
<Directory "/www/mywebdirectoryinapartitioneddisk">
Require all granted
</Directory>
this will solve the issue
here the post in my blog explaining everything in detail. It could work on NTFS
http://www.tbogard.com/2014/09/12/making-apache-server-to-read-a-partitioned-disk-the-definitive-solution/
It's actually quite simple:
1) Create a local user on the Windows host
2) Grant appropriate NTFS permissions to that user
3) Verify access (Windows only)
... THEN ...
4) Configure your NTFS mount on Linux to use the same Windows user and group (Linux user/group is irrelevant here)
5) Configure Apache to use that Linux group (Linux user/group is essential here)