We are having issues in hosting Webforms apps in one of the windows 2012 servers and IIS8.5. The server causes "DefaultHttpHandler.BeginProcessRequest method is not supported by IIS integrated pipeline mode" exception.
Attaching a screen shot for your reference
However when I tested in another server it works all fine. To isolate issues I have even tried to deploy a sample webforms app and try out.
I need integrated mode pipe line as I have a requirement around it.
I have verified the servers and there is no difference in iis configurations. What could be the possible reasons for this? Any guidance to narrow down the issue will really help.
Attaching the server comparison report. The image shows the differences in two servers. in the right side server the application does not work and in the left side server it works. If you see the diff there is not a lot of changes and btw the changes are because I added them as part of trouble shooting.
We compared every possible stuff on the servers and finally decided to take up the server in which it is working. The server in which it didnot work might have some issues with they way IIS was deployed.
So in a way there was no way out for this problem for me.
Related
I have a problem regarding White Screen Of Death (WSOD) at my site.
I will try to explain what I have tried until now.
I know it is not a triviel error to debug, but maybe some of you have tried something similar.
Here is the setup: One Windows Server 2019 v1809 with one IIS: 10.0.17763.1.
Multiple websites with associated application pools.
It's a MVC solution, and we are using .net 4.7.2.
What I have tried:
Recycled application pools every night
Restarted the server every night
Issued a IISReset every night
Deleted temporary files in C:\Windows\Microsoft.NET\
Looked at the IIS logs
Looked at the application log, our own log
Looked at the Windows log
Searched the Internet for similar problems
Made sure there always were some traffic at the website
Made sure no errors were shown when pressing F12 in the browser, the site always returs code 200
The WSOD comes at varies times, and not all the sites are affected at the same time.
A manuel recycle of the website always helps.
My question is, have any of you encounted similar problems?
And how did you solve it?
If you need more information please ask, and I will try to provide it.
/Regards Søren
This kind of problem is very unusual in IIS, because there is almost no record and useful information in the log file.
You can try to use this plan to repair IIS.
Unregister all the versions of ASP.NET with command "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis –ua". and the framework 64 also versions. 3.0 and 3.5... etc
Delete ASPNET account from "Local Users and Group – Users".
reregister ASP.NET with IIS using "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis –i". and framework64... net 3, 3.5 etc
Give permissions to the ASPNET account using "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis –ga machinename\ASPNET". for framework 32 and 64 and versions.
Reset IIS .
I am trying to install RemoteReader on our server. I was able to run it on local pc but with same config it is not running on live.
I am using http://www.keytours.com/remote/totalstay.ivector.co.uk/Content/DataObjects/PropertyReference/Image/ext189/image_188557_v1.jpg?w=75&h=75&mode=crop to rezise images according to your documentation as this link http://imageresizing.net/docs/v4/plugins/remotereader (human-friendly syntax).
I am also attaching diagnostic result of our server from gist
https://gist.github.com/anonymous/74f7d66daba5920149e4
When production behaves differently than development, start reducing differences between the two until you solve the problem. Preferably, have a staging server that is 100% identical to production, so you can test and debug without downtime.
we are using UrlScan on our server. it was blocking dots in url. so we
made AllowDotInPath settings to 1. It solved the issue.
Maybe you'll be able to help me out.
My situation is this:
We are migrating to from Win2003 to Win2012. We've got multiple web sites configured on the 2003 box and we can browse to each of the different names no problem at all, using Windows Integrated.
Well, we just fired up a Windows 2012 and started migrating to it but running into an ntlm 401 issue (log says specifically 401.2.5).
Changing the names to protect the innocent here:
Server Name: Server
going to http://server/apps/asmx/servivce.asmx works fine.
We have a second IP assigned to a new the same box, on port 80, but configured so we can go to http://conapps/apps/asmx/service.asmx. That should work, and return a simple wsdl, but it doesn't.
if we go to http://conapps/apps/anonymous/asmx/service.asmx, it works fine.
I've gone into the authentication tab, and have windows Integrated (and NTLM bubbled up to the top) but I keep getting the 401 errors. Ironcially, if I set anonymous on, it works as expected.
As I said, if I take the default web site, and configure it to point to the same physical files on the disk, it works fine. It's only when I try to go to the secondary name do I have problems.
So, anybody have any ideas what I might be missing?
I have set two websites in my IIS 8.5. I have one for production version and one for development (need this for the team work purposes). The structure is simple. Website is simple static page using BackboneJS and API calls to get all the data. All virtual paths and applications were set at the beginning manually by my self. For some reason some API calls didn't worked in dev site. I found out the physical path to the API project has changed. Do you have any idea, where can be the problem? Actually some of my collegues face this issue too.
Only think that cames to my mind is that when bdebugging the API, I use "Attach to process" in Visual Studio, where I connect to the correct IIS process - w3wp.exe with user name IIS APPPOOL\Dev or IIS APPPOOL\Prod according to the site I'm debugging.
Nevertheless I don't think the path should change itself. Where can be the problem? Does anyone have any idea how to prevent this strange behaviour?
OK, I've created an Azure Mobile Services project in Visual Studio 2013.
I run it up as-is, then in the browser I test it by adding a todo item via the simple browser app that seems to get baked into these service projects. It gives me a '201 success' message - brilliant.
I then convert the project from IIS Express to Local IIS as the web host, recompile and try again, and although I get the same smiley face app telling me that everything is OK, when I try and add a todo item I get a 404 error. This is contrary to the Microsoft article that gives these instructions, which clearly says I am able to choose either IIS Express or Local IIS when setting up the project.
My guess is that web.config is missing something when this project runs on the local IIS server.
I'm hoping someone already has a solution before I spend hours trying to work out how to configure IIS for this type of project.
I've already wasted a load of time working through loads of bugs and gotchas with Azure Mobile, and I'm starting to run out of steam - so I'm hoping someone can help me before I go and grab an account at Parse.com
Many thanks in anticipation.
Dean
The easiest approach for your situation might be to just deploy to the cloud, and use that service for your testing. Visual Studio 2013 Update 2 makes it easy to deploy your app and connect to it for remote debugging. It is a little slower than using a local instance, but you are also assured that there will be no surprises when you eventually go live (since you are live the whole time).
That said, we will investigate the issue you are seeing with using IIS directly. Some things you might want to try on your own:
Verify that you can view the web side from your Mac's browser, to make sure that the firewall is letting the requests through.
Try using the "Getting Starting" link from the smiley-face page, to see if the REST endpoints are behaving correctly.