I have just started looking at URL the Rewriter module in IIS.
The code below is what I have that works (It removes www from all the URLs to the site)
<rewrite>
<rules>
<rule name="Remove WWW" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions>
<add input="{CACHE_URL}" pattern="*://www.*" />
</conditions>
<action type="Redirect" url="{C:1}://{C:2}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
However, we have a third party API that posts to http://www.example.com/api/controller/method that no longer works. (It is being served 405's)
The problem is (I believe) that whilst WebAPI allows www.example.com/api/controller/method to POST, it is seeing example.com/api/controller/method as a different URL and is not allowing POST.
However the followingconfig section does not work. (Note, removing the wildcard section means it does work, so I am as convinced as I can be that it is this that is causing the 3rd Party to fail). Though testing the PassAPICall in IIS in the configure rewriting section passes. Is it that I have misunderstood the intent of stopProcessing, and in fact all it does is stop processing for that rule, so it then falls throug hto the following condition?
<rules>
<clear />
<rule name="PassAPICall" stopProcessing="true">
<match url="/api/Blah/QuotationComplete" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false" />
<action type="None" />
</rule>
<rule name="Remove WWW" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{CACHE_URL}" pattern="*://www.*" />
</conditions>
<action type="Redirect" url="{C:1}://{C:2}" redirectType="Permanent" />
</rule>
</rules>
Was a simple syntax issue, I needed to be a little more explicit with the Rule than the IIS test tool led me to believe.
changing
<match url="/api/Blah/QuotationComplete" />
to
<match url="^api/Blah/QuotationComplete$" />
did it.
Related
I'm working on updating the stripe checkout from a website, I was doing it successfully on localhost but when I put it on live mode on a windows server it stopped working. The issue is that when I should be redirected to the checkout page from stripe, the url is altered and becomes something that doesn't make sense:
The correct url: www.checkout.stripe.com/pay/cs_...
The url that I get redirected to: www.mysite.com/pay/cs_..
I kept thinking what could be the causa of that and I think it's the URL rewrite rule that I have on the windows server. I would like to add an exception to the rule and allow the stripe checkout to initiate, but I have no idea how to do it.
Below is my web.config file:
<configuration>
<system.webServer>
<rewrite>
<rules>
<rule name="ReverseProxyInboundRule1" enabled="true" stopProcessing="true">
<match url="(.*)" />
<action type="Rewrite" url="http://localhost:8008/{R:1}" />
</rule>
<rule name="HTTPS" enabled="false" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
</rules>
</rewrite>
</system.webServer>
</configuration>
I figured it out. This is my final web.config
<configuration>
<system.webServer>
<urlCompression doDynamicCompression="false" />
<rewrite>
<rules>
<clear />
<rule name="ReverseProxyInboundRule">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false" />
<action type="Rewrite" url="http://localhost:8008/{R:1}" />
</rule>
<rule name="stripe redirect in checkout" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{REQUEST_URI}" pattern="/pay/" />
</conditions>
<action type="Redirect" url="checkout.stripe.com{REQUEST_URI}" redirectType="SeeOther" />
</rule>
</rules>
</rewrite>
</system.webServer>
My issue was not really understanding the meaning of the options in the URL Rewrite. I checked the course URL Rewrite for Developers and it was really helpful. I was able to solve the issue quickly.
The file you have shown contains the inbound rewrite rules only. But you have an issue with response from your server. Thus, you should fix the outbound rewrite rule in the right config file.
I'm using IIS 10. I've a website that is reachable with subdomain1.domain.com and subdomain2.domain.com only on HTTPS protocol.
I would like to set up a rewrite rule only if request comes from subdomain2.domain.com where website should load the URL subdomain2.domain.com/la/signin. This last URL should be masked and not showed to the user.
I've tried a lot of rewrite rules and searched other suggestions on stackoverflow but every solutions did not worked for me, even without mask.
This one is just my last try without mask, but I've tried many other solutions:
<rewrite>
<rules>
<rule name="Redirect" stopProcessing="true">
<match url="https://subdomain2\.domain\.com$" />
<action type="Rewrite" url="{R:0}/la/signin" appendQueryString="true" logRewrittenUrl="true" />
</rule>
</rules>
</rewrite>
Any other suggestion?
Please try this rule. It will rewrite https://subdomain2.domain.com(/) to subdomain2.domain.com/la/signin.
<rule name="Redirect" stopProcessing="true">
<match url="(.*)" />
<action type="Rewrite" url="la/signin" appendQueryString="true" logRewrittenUrl="true" />
<conditions>
<add input="{HTTP_HOST}" pattern="subdomain2\.domain\.com" />
<add input="{HTTPS}" pattern="^on$" />
<add input="{URL}" pattern="^(/)?$" />
</conditions>
</rule>
URL Rewrite rule for redirecting from http to https:
<rewrite>
<rules>
<rule name="http to https" enabled="false" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
</rules>
</rewrite>
However, when you go directly to a subfolder like http://www.example.com/employees via an old bookmark or by typing the address into the browser, it doesn't redirect to https://www.example.com/employees but stays on http://www.example.com/employees.
Oddly enough, we have the same rewrite rules for a dev site, and it will redirect from http://dev.example.com/employees to https://dev.example.com/employees.
Very strange. Any ideas?
This is what I use - I add it to the applicationhost.config file, so it's at the global level. It's a little different then yours, I run many different sites and never have the issue you're describing doing it this way.
<rule name="Root Redirect to HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{SERVER_PORT}" pattern="^80$" />
<add input="{HTTP_HOST}" pattern="example\.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:0}" />
</rule>
I'm trying to get a basic URL rewrite to work for my Azure web App
<system.webServer>
<rewrite>
<rules>
<rule name="SalesCloudGmail" stopProcessing="true">
<match url="/SalesCloudGmail.aspx" />
<action type="Redirect" url="/SalesCloudGmail" />
</rule>
</rules>
</rewrite>
</system.webServer>
Was expecting to open the URL .../SalesCloudGmail.aspx and see .../SalesCloudGmail in the Address bar???
What Am I missing
Give this a try, your regex pattern matching is a little off based on how you're using it. But this should work or at least get you much closer.
<rule name="SalesCloudGmail" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{REQUEST_URI}" pattern="^\/SalesCloudGmail\.aspx.*" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/SalesCloudGmail" />
</rule>
Please try below rewrite rule:
<rewrite>
<rules>
<rule name="SalesCloudGmail" stopProcessing="true">
<match url="^\/SalesCloudGmail\.aspx$" />
<action type="Redirect" url="/SalesCloudGmail" />
</rule>
</rules>
</rewrite>
Please following this article to test your match pattern.
I am getting a redirect loop when I try and implement this mobile redirect I created:
<rewrite>
<rules>
<rule name="Mobile Rewrite" patternSyntax="ECMAScript" stopProcessing="true">
<match url=".*" ignoreCase="true" negate="false" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="website.com.au" />
<add input="{HTTP_USER_AGENT}" pattern="midp|mobile|phone" />
</conditions>
<action type="Redirect" url="http://mwebsite.com.au" appendQueryString="false" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
This is the catch though, the mwebsite.com.au is assigned to the same web.config as website.com.au so they are handled by the same web.config. This is the way the .net application I am dealing with is handling the request (I cannot split them up, they have to pass through this 1 web.config)
I have tested this by replacing mwebsite.com.au with google.com.au and it works perfectly but for some reason URLREWRITE cannot process the request when it has to inject mwebsite.com.au back through the same rule.
any help would be amazing.
Your rule is basically saying: if {HTTP_HOST} contains website.com.au and {HTTP_USER_AGENT} contains any of midp, mobile or phone, redirect to http://mwebsite.com.au.
As you can guess, http://mwebsite.com.au contains website.com.au.
To fix this, simply tell your condition that it should START with website.com.au using the pattern ^website.com.au.
So your rule would become:
<rewrite>
<rules>
<rule name="Mobile Rewrite" patternSyntax="ECMAScript" stopProcessing="true">
<match url=".*" ignoreCase="true" negate="false" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^website.com.au" />
<add input="{HTTP_USER_AGENT}" pattern="midp|mobile|phone" />
</conditions>
<action type="Redirect" url="http://mwebsite.com.au" appendQueryString="false" redirectType="Permanent" />
</rule>
</rules>
</rewrite>