I'm trying to write a script that checks if there in no specific Files that has parameter in the name on any position, and after statement is true (there is no such file), function should create directory with same name as Parameter $1, move files from symlink Current to newly created directory, and after that find and remove all files that are not in /current/ and contains in name #tp or numbers. I've wrote something like this, but don't know why, it's not working, can I get any help? :)
if[-ne $1]; then mkdir $1 && mv /current/* data/data2/data3/$1
find /home/ -not -path /current/ -and -not -newer /current/ -and -name *#tmp" -exec rm -r {} \; -name "*[0-9]*" -exec rm -r {} \;
else
echo "There is this tag already "
fi
If you want to check for non-existing directory, you can use this:
if [ ! -d $1 ]
instead of
if [ -ne $1 ]
Update: the previous command will only look for matching folder name. If you want to search for folders containing your parameter, you could use something like this:
if [[ `find -maxdepth 1 -type d -name "*${1}*"` = "" ]]; then
# ... commands when your param is not part of any dir ...
fi
Related
My directory contains mix of hundreds of files and directories similar to this:
508471/
ae_lstm__ts_ 508471_detected_anomalies.pdf
ae_lstm__508471_prediction_result.pdf
mlp_508471_prediction_result.pdf
mlp__ts_508471_detected_anomalies.pdf
vanilla_lstm_508471_prediction_result.pdf
vanilla_lstm_ts_508471_detected_anomalies.pdf
598690/
ae_lstm__ts_598690_detected_anomalies.pdf
ae_lstm__598690_prediction_result.pdf
mlp_598690_prediction_result.pdf
mlp__ts_598690_detected_anomalies.pdf
vanilla_lstm_598690_prediction_result.pdf
vanilla_lstm_ts_598690_detected_anomalies.pdf
There are folders with an ID number as their names, like 508471 and 598690.
In the same path as these folders, there are pdf files that have this ID number as part of their name. I need to move all the pdf files with the same ID in their name, to their related directories.
I tried the following shell script but it doesn't do anything. What am I doing wrong?
I'm trying to loop over all the directories, find the files that have id in their name, and move them to the same dir:
for f in ls -d */; do
id=${f%?} # f value is '598690/', I'm removing the last character, `\`, to get only the id part
find . -maxdepth 1 -type f -iname *.pdf -exec grep $id {} \; -exec mv -i {} $f \;
done
#!/bin/sh
find . -mindepth 1 -maxdepth 1 -type d -exec sh -c '
for d in "$#"; do
id=${d#./}
for file in *"$id"*.pdf; do
[ -f "$file" ] && mv -- "$file" "$d"
done
done
' findshell {} +
This finds every directory inside the current one (finding, for example, ./598690). Then, it removes ./ from the relative path and selects each file that contains the resulting id (598690), moving it to the corresponding directory.
If you are unsure of what this will do, put an echo between && and mv, it will list the mv actions the script would make.
And remember, do not parse ls.
The below code should do the required job.
for dir in */; do find . -mindepth 1 -maxdepth 1 -type f -name "*${dir%*/}*.pdf" -exec mv {} ${dir}/ \;; done
where */ will consider only the directories present in the given directory, find will search only files in the given directory which matches *${dir%*/}*.pdf i.e file name containing the directory name as its sub-string and finally mv will copy the matching files to the directory.
in Unix please use below command
find . -name '*508471*' -exec bash -c 'echo mv $0 ${0/508471/598690}' {} \;
You may use this for loop from the parent directory of these pdf files and directories:
for d in */; do
compgen -G "*${d%/}*.pdf" >/dev/null && mv *"${d%/}"*.pdf "$d"
done
compgen -G is used to check if there is a match for given glob or not.
Can you please suggest efficient way to move files from one location to their sub directory in a loop.
Ex:
/MY_PATH/User1/1234/Daily/abc.txt to /MY_PATH/User1/1234/Daily/Archive/abc.txt
/MY_PATH/User2/3456/Daily/def.txt to /MY_PATH/User2/3456/Daily/Archive/def.txt
/MY_PATH/User1/1111/Daily/hij.txt to /MY_PATH/User1/1111/Daily/Archive/hij.txt
/MY_PATH/User2/2222/Daily/def.txt to /MY_PATH/User2/2222/Daily/Archive/def.txt
I started in this way, but need your suggestions and best way to write it:
#!/bin/bash
dir1="/MyPath/"
subs= `ls $dir1`
for i in $subs; do
mv $dir1/$i/*/Daily $dir1/$i/*/Daily/Archive
done
My one line bash
for dir in $(
find MY_PATH -mindepth 3 -maxdepth 3 -type d -name Daily
);do
mkdir -p $dir/Archives
find $dir -maxdepth 1 -mindepth 1 ! -name Archives \
-exec mv -t $dir/Archives {} +
done
To quickly test:
mkdir -p MY_PATH/User{1,2,3,4}/{1234,2346,3333,2323}/Daily
touch MY_PATH/User{1,2,3,4}/{1234,2346,3333,2323}/Daily/{abc,bcd,def,feg,fds}.txt
for dir in $( find MY_PATH -mindepth 3 -maxdepth 3 -type d -name Daily );do
mkdir -p $dir/Archives; find $dir -maxdepth 1 -mindepth 1 ! -name Archives \
-exec mv -t $dir/Archives {} + ; done
ls -lR MY_PATH
This seem match OP's request
For more robust solution
There is a solution wich work with spaces somewhere in path...
Edited to include #mklement0's well pointed suggestion.
while IFS= read dir;do
mkdir -p "$dir"/Archives
find "$dir" -maxdepth 1 -mindepth 1 ! -name Archives \
-exec mv -t "$dir/Archives" {} +
done < <(
find MY_PATH -mindepth 3 -maxdepth 3 -type d -name Daily
)
Same demo;
mkdir -p MY_PATH/User{1,2,3,"4 3"}/{1234,"23 6",3333,2323}/Daily
touch MY_PATH/User{1,2,3,"4 3"}/{1234,"23 6",3333,2323}/Daily/{abc,"b c",def,hgz0}.txt
while read dir;do mkdir -p "$dir"/Archives;find "$dir" -maxdepth 1 -mindepth 1 \
! -name Archives -exec mv -t "$dir/Archives" {} +; done < <(
find MY_PATH -mindepth 3 -maxdepth 3 -type d -name Daily )
ls -lR MY_PATH
Assuming the directory structure is as you have shown in your examples, i.e.
MY_PATH/
subdir-level-1/
subdir-level-2/
Daily/
files
Archive/
Here's what you can do:
shopt -s nullglob # defend against globbing failure -- inspired by mklement0's answer
root="/MyPath"
for dir in "${root}"/*/*/Daily/; do
mkdir -p "${dir}/Archive" # if Archive might not exist; to be pedantic you should look at David C. Rankin's answer for error handling, but usually we know what we're doing so that's not necessary
find "${dir}" -maxdepth 1 -type f -print0 | xargs -0 mv -t "${dir}/Archive"
done
The reason I use find and xargs is to save a few processes; you can as well move files in each ${dir} one by one.
Update: #mklement0 suggested that find "${dir}" -maxdepth 1 -type f -print0 | xargs -0 mv -t "${dir}/Archive" can be further improved to
find "${dir}" -maxdepth 1 -type f -exec mv -t "${dir}/Archive" +
which is a very good point.
Try the following:
dir1="/MyPath"
for d in "$dir1"/*/*/Daily/; do
[[ -d $d ]] || break # break, if no subdirectories match
for f in "$d"/*; do # loop over files in */*/Daily/
[[ -f "$f" ]] || continue # skip non-files or if nothing matches
mv "$f" "$d"/Archive/
done
done
"$dir1"*/*/Daily/ matches all grandchild subdirectories of $dir1; thanks to the terminating /, only directories match; note that, as a result, $d ends in /.
Note that $d therefore ends in /, and, strictly speaking, needs no / later on when synthesizing paths with it (e.g., "$d"/*), but doing so does no harm and helps readability, as #4ae1e1 points out in a comment.
[[ -d $d ]] || break ensures that the loop is exited if no grandchild directories match (by default, a glob (pattern) that has no matches is passed as is to the loop).
for f in "$d"* loops over all entries (files and/or subdirs.) in $d:
[[ -f "$f" ]] || continue ensures that only files are processed or, in the event that nothing matches, the loop is exited.
mv "$f" "$d"/Archive/ then moves each file to subdir. Archive.
You need to check for, and if not present, create the destination directory before moving the file to Archive. If you cannot create the directory (due to permissions or otherwise), you skip the move. The following does not assume any limitation on depth, but will omit any directory containing Archive as an intermediate subdirectory:
oldifs="$IFS"
IFS=$'\n'
for i in $(find /MY_PATH -type f); do
[[ "$i" =~ Archive ]] && continue
[ -d "${i%/*}/Archive" ] || mkdir -p "${i%/*}/Archive"
[ -d "${i%/*}/Archive" ] || {
printf "error: unable to create '%s'\n" "${i%/*}/Archive"
continue
}
mv -fv "$i" "${i/Daily/Daily\/Archive}"
done
IFS="$oldifs"
Output when run
$ bash archive_daily.sh
mv -fv /MY_PATH/User1/1111/Daily/hij.txt /MY_PATH/User1/1111/Daily/Archive/hij.txt
mv -fv /MY_PATH/User1/1234/Daily/abc.txt /MY_PATH/User1/1234/Daily/Archive/abc.txt
mv -fv /MY_PATH/User2/3456/Daily/def.txt /MY_PATH/User2/3456/Daily/Archive/def.txt
mv -fv /MY_PATH/User2/2222/Daily/def.txt /MY_PATH/User2/2222/Daily/Archive/def.txt
Note: you can limit/tighten the file selection by adjusting the call to find populating the for loop (e.g. -name or -iname). This simply checks/moves every file to its Archive folder. To limit to only files with the .txt extension, you can specify find /MY_PATH -type f -name "*.txt". To limit to only files in the /MY_PATH/User1 and /MY_PATH/User2directories with a .txt extension, use find /MY_PATH/User[12] -type f -name "*.txt".
Note2: when looping on filenames, the paths & filenames should not contain non-standard characters for the current locale. Certainly you should not have the '\n' as a character in your filename. Setting IFS is required to protect against word splitting on spaces in either the path or filename.
Since you said efficient, anything with a subshell will fail in funny ways with lots of entries. You're better off using xargs:
#!/bin/bash
dir1="/MyPath/"
find $dir1 -name Daily -type d -depth 3 | while read i
do
pushd .
cd $i
mkdir Archive
find . -type f -depth 1 | xargs -J {} mv {} Archive
popd
done
The outer find will look for you Daily directories. It's very specific in that they have to be at a certain depth and directories, not regular files. The results gets piped into read, where each directory is entered, Archive is created, and files batch-copied with xargs ... mv. Complete file lists and directory lists are never stored in memory, so it scales very well.
I am trying to create a small bash script that essentially looks through a directory that includes hundreds of sub directories. in SOME of these subdirectories include a textfile.txt and a htmlfile.html where the names textfile and htmlfile are variable.
I only really care about sub directories that have both the .txt and the .html, all other subdirecories can be ignored.
I then want to list all the .html files and .txt files that are in the same sub directory
this seems like a pretty simple issue to solve but I am at a loss. all I can really get working is a line of code that outputs sub directories that have either a .html file or .txt with no association with the actual sub directory they are in, and I am pretty new at bash scripting so I can't go any further
#!/bin/bash
files="$(find ~/file/ -type f -name '*.txt' -or -name '*.html')"
for file in $files
do
echo $file
done
The following find command looks checks every subdirectory and, if it has both html and txt files, it lists all of them:
find . -type d -exec env d={} bash -c 'ls "$d"/*.html &>/dev/null && ls "$d"/*.txt &>/dev/null && ls "$d/"*.{html,txt}' \;
Explanation:
find . -type d
This looks for all subdirectories of the current directory.
-exec env d={} bash -c '...' \;
This sets the environment variable d to the value of the found subdirectory and then executes the bash command that is contained within the single quotes (see below).
ls "$d"/*.html &>/dev/null && ls "$d"/*.txt &>/dev/null && ls "$d/"*.{html,txt}
This is the bash command that is executed. It consists of three statements and-ed together. The first checks to see if directory d has any html files. If so, the second statement runs and it checks to see if there are any txt files. If so, the last statement is executed and it lists all html and txt files in the directory d.
This command is safe for all file and directory names containing spaces, tabs, or other difficult characters.
You could do it by searching recursively with the globstar option:
shopt -s globstar
for file in **; do
if [[ -d $file ]]; then
for sub_file in "$file"/*; do
case "$sub_file" in
*.html)
html=1;;
*.txt)
txt=1;;
esac
done
[[ $html && $txt ]] && echo "$file"
html=""
txt=""
fi
done
You can make use of -o
#!/bin/bash
files=$(find ~/file/ -type f -name '*.txt' -o -name '*.html')
for file in $files
do
echo $file
done
#!/bin/bash
#A quick peek into a dir to see if there's at least one file that matches pattern
dir_has_file() { dir="$1"; pattern="$2";
[ -n "$(find "$dir" -maxdepth 1 -type f -name "$pattern" -print -quit)" ]
}
#Assumes there are no newline characters in the filenames, but will behave correctly with subdirectories that match *.html or *.txt
find "$1" -type d|\
while read d
do
dir_has_file "$d" '*.txt' &&
dir_has_file "$d" '*.html' &&
#Now print all the matching files
find "$d" -maxdepth 1 -type f -name '*.txt' -o -name '*.html'
done
This script takes the root directory to look into as the first argument ($1).
The test command is what you need to check for the existence of each file in each of the subdirs:
find . -type d -exec sh -c "if test -f {}/$file1 -a -f {}/$file2 ; then ls {}/*.{txt,html} ; fi" \;
where $file1 and $file2 are the two .txt and .html files you are looking for.
I've already used that command to rename the files in multiple directories and change JPG to jpg, so I have consistency.
find . -name '*.jpg' -exec sh -c 'mv "$0" "${0%.JPG}$.jpg"' {} \;
Do you have any idea how to change that to include the folder name in the name of the file
I am executing that in a folder that contains about 2000 folders (SKU's) or products ... and inside every SKU folder, there are 9 images. 1.jpg 2.jpg .... 9.jpg.
So the bottom-line is I have 2000 images with name 1.jpg, 2.jpg ... 9.jpg. I need those files to be unique, for example:
folder-name-1.jpg ... folder-name.2.jpg ... so on, in every folder.
Any help will be appreciated.
For example I can do as follows:
$ find . -iname '*.jpg' | while read fn; do name=$(basename "$fn") ; dir=$(dirname "$fn") ; mv "$fn" "$dir/$(basename "$dir")-$name" ;done
./lib/bukovina/version.jpg ./lib/bukovina/bukovina-version.jpg
./lib/bukovina.jpg ./lib/lib-bukovina.jpg
You can use fine one-liner:
find . -name '*.jpg' -execdir \
bash -c 'd="${PWD##*/}"; [[ "$1" != "$d-"* ]] && mv "$1" "./$d-$1"' - '{}' \;
This command uses safe approach to check whether image name is already not prefixed by the current directory name. You can run it multiple times also and image name won't be renamed after first run.
To get the folder name of a file you can do $(basename $(dirname ${FILE})), where ${FILE} is a path that may be relative but must contain at least one folder before the file name in it. This should not be a problem with find. If it is, just run it from one directory up.
find . -name '*.jpg' -exec sh -c 'mv "$0" "$(basename $(dirname $0))-${0%.JPG}$.jpg"' {} \;
Or, if you have JPEGs in your current directory:
find ../<dirname> -name '*.jpg' -exec sh -c 'mv "$0" "$(basename $(dirname $0))-${0%.JPG}$.jpg"' {} \;
this script moves all the doc files to a specified directory....i have managed to put an argument but the problem im facing is puting the full path where the scripts are moving to for example i want to run the script like this below
./loo -d then path where im moving the files (i.e ./loo -d the second argument where files are moving to)
this is my code
#!/bin/bash
From="/home/elg19/lone/doc"
To="/home/elg19/documents"
if [ $1 = -d ]; then
cd "$From"
for i in pdf txt doc; do
find . -type f -name "*.${i}" -exec mv "{}" "$To" \;
done
fi
I'm not sure what is the exact problem?
Do you need to put a " around full path if it contains spaces?
./loo -d "full path with spaces"
Similary to $1, full path can be retrieved with $2.
how about this?
#!/bin/bash
from=/home/elg19/lone/doc
if [[ $1 = -d ]]; then
to=$2
else
to=/home/elg19/documents
fi
find "$from" -type f \( -name '*.pdf' -o -name '*.txt' -o -name '*.doc' \) -exec bash -c 'dest=$1; shift; mv "$#" "$dest"' _ "$to" {} +