UML provides us with many different kinds of diagrams. but in many situations only small set of them is really necessary, what do you think about the most usefull UML diagrams, even for very small projects?
Well, it really depends on the project. I think it is wrong to just create any UML diagram as a rule without assessing if it will be really usefull.
However there are some obvious situations when they're usefull:
If your project will be any way large in terms of OO structure then it is usually usefull to create a class diagram. That way you can deal in abstractions until it is time to get stuck into details.
If you project will be mostly UI driven then it can be quite useful to create a Use Case diagram as a way of defining requirements. This is especially useful if you can get your customer to buy into this method.
If it looks like your system will have many interactions between objects then creating a sequence diagram can be usefull for understanding interactions. Also, I think sequence diagrams are the most intuitive for developers as I notice a lot of developers instinctively diagram there interactions like this - even if they're not familiar in UML - in simple powerpoint\visio diagrams.
Deplyoment Diagrams are obviously usefull if your system will use many technolegies and require a lot of HW.
I think key point is that only use UML when the software becomes complicated to the point where we need to think in abstractions - UML helps visualise and document these abstractions.
I do not think UML diagrams are essential part of a project documentation whether we're talking about big or small projects.
Good comments around provide much more value than sophisticated diagrams.
I personally have an impression UML is a toy of the academia world. It's the only place I was hearing and seeing people running around with UML, SOA and so on.
In my working practice I've barely seen UML at all. Well, maybe once during my term project and at my current job where we've got a couple of eight-years-old (and just the same deprecated) diagrams somewhere on the internal FTP server.
Usually formal UML is too much for small projects. Just stick to basic class diagrams and simple use-case diagrams.
Small projects are (in my experience) more often subject to change so your diagrams will be out-of-date very often. You are much more likely to keep a less formal diagram up-to-date than redo all the fancy UML stuff.
UML is dead, nobody who matters uses it.
The only people that use UML are consultant types who write articles and are trying to be formal and fancy and lack substance.
If UML is so great why cant i find any for any of the projects that Google publishes on googlecode ?
Where is the UML for Ruby or Python or DOT NET or Java ?
UML is dead because the use of open source crapy tools !! Many companies take free tools and just create few diagrams, no training at all then they say that this is not useful.
This is non professional and very limited use of UML is a real disaster for projects !!
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
I'm going to start learning and using UML.
I need to know what considerations do you suggest for me? What is the best way to learn effectively it do you think?
Thank you
In a class named SE101- Software Engineering 1A at CPIT in New Zealand.
In my opinion, you'll find that sequence and use case diagrams will be essential for getting ideas across to non-programmers, and class diagrams (and object diagrams, to a lesser extent), for communicating ideas to other code-monkeys.
Plus, many programming books that you may read in the future, Design Patterns, for example, will use UML diagrams (class and object, mostly) to show the structure of the patterns. Knowing UML will make understanding these books a lot easier. Documentation, too, to a lesser extent.
I never did, and I never will. Modelling is not about mastering a type of discipline, good models don't need UML to be understood.
First, get a book/tutorial and try to understand the basics (definitions, models drawing, ...)
then, learn by example and practice, imagine or use a real problem and try to model it.
I started by reading an introductory book - Martin Fowler UML Distilled was quite good. Than I decided I really want to know how to use it, so I read a book about UML2 and UP (Unified Process) by Jim Arlow and Ila Neustadt. Afterward I had opportunity to take software engineering basics lecture at university which made me create simple specification with few diagrams. Afterward I took UML lecture, where I had again to create some UML diagrams. Now I am in the phase when UML is clear and I feel I need more knowledge about OO modeling, so I read a book on object oriented data modeling and object oriented programming and there are Use Cases by Alistair Cockbourne and some analytical patterns ahead for me. In between I read much of the model driven stuff and listened to SE Radio about all UML stuff - http://www.se-radio.net/tags/uml .
UML Distilled by Martin Fowler together with Applying UML And Patterns by Craig Larman, makes you understand the concept of UML and how to use it - as well the whole process with UP and so forth.
http://www.smartdraw.com/resources/tutorials/uml-diagrams/#/resources/tutorials/Getting-Started
This link was very helpful for me to learn modeling with UML.
For open source solutions check out Dia, and dia2code.
I read Martin Fowler's UML Distilled. That's all you need. It's thin, dense book that's unmatched on that topic.
I have several UML books, UML Distilled book from Addison Wesley comes to mind,
then it all gets familiar when you start reading Design Pattern books that illustrates the concepts using UML Diagrams.
I also use UML when I sketch a design.
You can only focus on 2 diagrams and start modeling almost immediately.
Usecase diagrams require reading but class diagram can be done at the same time as the code. It means that in less than 3 hours you can model.
Usecase diagram is simple and will help you to define the scope of your project.
Class diagram will define the physical architecture and can therefore be learned at the same time as codding if you use a tool having live code and model synchronization.
Don't spend time on model driven and code generation from a model because nobody really use it today !!
Inventor.
Sequence diagrams look more like business processes and usecases rather unstandardized.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
In college I've had numerous design and UML oriented courses, and I recognize that UML can be used to benefit a software project, especially use-case mapping, but is it really practical? I've done a few co-op work terms, and it appears that UML is not used heavily in the industry. Is it worth the time during a project to create UML diagrams? Also, I find that class diagrams are generally not useful, because it's just faster to look at the header file for a class. Specifically which diagrams are the most useful?
Edit: My experience is limited to small, under 10 developer projects.
Edit: Many good answers, and though not the most verbose, I belive the one selected is the most balanced.
Using UML is like looking at your feet as you walk. It's making conscious and explicit something that you can usually do unconsciously. Beginners need to think carefully about what they're doing, but a professional programmer already knows what they're doing. Most of the time, writing the code itself is quicker and more effective than writing about the code, because their programming intuition is tuned to the task.
It's not just about what you're doing though. What about the new hire who comes in six months from now and needs to come up to speed on the code? What about five years from now when everyone currently working on the project is gone?
It's incredibly helpful to have some basic up to date documentation available for anyone who joins the project later. I don't advocate full blown UML diagrams with method names and parameters (WAY too difficult to maintain), but I do think that a basic diagram of the components in the system with their relationships and basic behavior is invaluable. Unless the design of the system changes drastically, this information shouldn't change a lot even as the implementation is tweaked.
I've found that the key to documentation is moderation. No one is going to read 50 pages of full blown UML diagrams with design documentation without falling asleep a few pages in. On the other hand, most people would love to get 5-10 pages of simple class diagrams with some basic descriptions of how the system is put together.
The other case where I've found UML to be useful is for when a senior developer is responsible for designing a component but then hands the design to a junior developer to implement.
In a sufficiently complex system there are some places where some UML is considered useful.
The useful diagrams for a system, vary by applicability.
But the most widely used ones are:
Class Diagrams
State Diagrams
Activity Diagrams
Sequence Diagrams
There are many enterprises who swear by them and many who outright reject them as an utter waste of time and effort.
It's best not to go overboard and think what's best for the project you are on and pick the stuff that is applicable and makes sense.
Using UML is like looking at your feet as you walk. It's making conscious and explicit something that you can usually do unconsciously. Beginners need to think carefully about what they're doing, but a professional programmer already knows what they're doing. Most of the time, writing the code itself is quicker and more effective than writing about the code, because their programming intuition is tuned to the task.
The exception is why you find yourself in the woods at night without a torch and it's started to rain - then you need to look at your feet to avoid falling down. There are times when the task you've taken on is more complicated than your intuition can handle, and you need to slow down and state the structure of your program explicitly. Then UML is one of many tools you can use. Others include pseudocode, high-level architecture diagrams and strange metaphors.
Generic work-flow and DFDs can be very useful for complex processes. All other diagramming (ESPECIALLY UML) has, in my experience, without exception been a painful waste of time and effort.
I'd have to disagree, UML is used all over the place - anywhere a IT project is being designed UML will usually be there.
Now whether it is being used well is another matter.
As Stu said, I find both Use Cases (along with the use case descriptions) and activity diagrams to be the most helpful from a developer point of view.
Class diagram can be very useful when trying to show relationships, as well as object attributes, such as persistence. When it comes to adding ever single attribute or property they are usually overkill, especially as they often become out of date quickly once code is written.
One of the biggest problems with UML is the amount of work required to keep it up to date once code is being generated, as there are few tools that can re-engineer UML from code, and few still that do it well.
I will qualify my answer by mentioning that I don't have experience in large (IBM-like) corporate development environments.
The way I view UML and the Rational Unified Process is that it's more TALKING about what you're going to do than actually DOING what you're going to do.
(In other words it's largely a waste of time)
Throw away only in my opinion. UML is a great tool for communicating ideas, the only issue is when you store and maintain it because you are essentially creating two copies of the same information and this is where it usually blows.
After the initial round of implementation most of the UML should be generated from the source code else it will go out of date very quickly or require a lot of time (with manual errors) to keep up to date.
I co-taught a senior-level development project course my last two semesters in school. The project was intended to be used in a production environment with local non-profits as paying clients. We had to be certain that code did what we expected it to and that the students were capturing all the data necessary to meet the clients' needs.
Class time was limited, as was my time outside of the classroom. As such, we had to perform code reviews at every class meeting, but with 25 students enrolled individual review time was very short. The tool we found most valuable in these review sessions were ERD's, class diagrams and sequence diagrams. ERD's and class diagrams were done only in Visual Studio, so the time required to create them was trivial for the students.
The diagrams communicated a great deal of information very quickly. By having a quick overview of the students' designs, we could quickly isolate problem areas in their code and perform a more detailed review on the spot.
Without using diagrams, we would have had to take the time to go one by one through the students' code files looking for problems.
I am coming to this topic a little late and will just try an clarify a couple minor points. Asking if UML is useful as far too broad. Most people seemed to answer the question from the typical/popular UML as a drawing/communication tool perspective. Note: Martin Fowler and other UML book authors feel UML is best used for communication only. However, there are many other uses for UML. Above all, UML is a modeling language that has notation and diagrams mapped to the logical concepts. Here are some uses for UML:
Communication
Standardized Design/Solution documentation
DSL (Domain Specific Language) Definition
Model Definition (UML Profiles)
Pattern/Asset Usage
Code Generation
Model to Model transformations
Given the uses list above the posting by Pascal is not sufficient as it only speaks to diagram creation. A project could benefit from UML if any of the above are critical success factors or are problem areas that need a standardized solution.
The discussion should expanded out from how UML can be over kill or applied to small projects to discuss when UML makes sense or will actually improve the product/solution as that is when UML should be used. There are situations where UML for one developer could sense as well, such as Pattern Application or Code Generation.
UML has worked for me for years. When I started out I read Fowler's UML Distilled where he says "do enough modelling/architecture/etc.". Just use what you need!
From a QA Engineer's perspective, UML diagrams point out potential flaws in logic and thought. Makes my job easier :)
Though this discussion has long been inactive, I have a couple of -to my mind important- points to add.
Buggy code is one thing. Left to drift downstream, design mistakes can get very bloated and ugly indeed. UML, however, is self-validating. By that I mean that in allowing you to explore your models in multiple, mathematically closed and mutually-checking dimensions, it engenders robust design.
UML has another important aspect: it "talks" directly to our strongest capability, that of visualisation. Had, for example, ITIL V3 (at heart simple enough) been communicated in the form of UML diagrams, it could have been published on a few dozen A3 foldouts. Instead, it came out in several tomes of truly biblical proportions, spawning an entire industry, breathtaking costs and widespread catatonic shock.
I believe there may be a way to utilize Cockburn style UML fish,kite, and sea-level use cases as described by Fowler in his book "UML Distilled." My idea was to employ Cockburn use cases as an aid for code readability.
So I did an experiment and there is a post here about it with the Tag "UML" or "FOWLER." It was a simple idea for c#. Find a way to embed Cockburn use cases into the namespaces of programming constructs (such as the class and inner class namespaces or by making use of the namespaces for enumerations). I believe this could be a viable and simple technique but still have questions and need others to check it out. It could be good for simple programs that need a kind of pseudo-Domain Specific Language which can exist right in the midst of the c# code without any language extensions.
Please check out the post if you are interested. Go here.
I think the UML is useful thought I think the 2.0 spec has made what was once a clear specification somewhat bloated and cumbersome. I do agree with the edition of timing diagrams etc since they filled a void...
Learning to use the UML effectively takes a bit of practice. The most important point is to communicate clearly, model when needed and model as a team. Whiteboards are the best tool that I've found. I have not seen any "digital whiteboard software" that has managed to capture the utility of an actual whiteboard.
That being said I do like the following UML tools:
Violet - If it were any more simple it would be a piece of paper
Altova UModel - Good tool for Java and C# Modeling
MagicDraw - My favorite commercial tool for Modeling
Poseidon - Decent tool with good bang for the buck
StarUML - Best open source modeling tool
UML diagrams are useful for capturing and communicating requirements and ensuring that the system meets those requirements. They can be used iteratively and during various stages of planning, design, development, and testing.
From the topic: Using Models within the Development Process at http://msdn.microsoft.com/en-us/library/dd409423%28VS.100%29.aspx
A model can help you visualize the world in which your system works, clarify users' needs, define the
architecture of your system, analyze the code, and ensure that your code meets the requirements.
You might also want to read my response to the following post:
How to learn “good software design/architecture”? at https://stackoverflow.com/questions/268231/how-to-learn-good-software-design-architecture/2293489#2293489
I see sequence diagrams and activity diagrams used fairly often. I do a lot of work with "real-time" and embedded systems that interact with other systems, and sequence diagrams are very helpful in visualizing all the interactions.
I like to do use-case diagrams, but I haven't met too many people who think they are valuable.
I've often wondered whether Rational Rose is a good example of the kinds of applications you get from UML-model-based design. It's bloated, buggy, slow, ugly, ...
I found UML not really useful for very small projects, but really suitable for larger ones.
Essentially, it does not really matter what you use, you just have to keep two things in mind:
You want some sort of architecture planning
You want to be sure that everyone in the team is actually using the same technology for project planning
So UML is just that: A standard on how you plan your projects. If you hire new people, there are more likely to know any existing standard - be it UML, Flowchard, Nassi-Schneiderman, whatever - rather than your exising in-house stuff.
Using UML for a single developer and/or a simple software project seems overkill to me, but when working in a larger team, I would definitely want some standard for planning software.
UML is useful, yes indeed! The main uses I've made of it were:
Brainstorming about the ways a piece of software should work. It makes easy to communicate what you are thinking.
Documenting the architecture of a system, it's patterns and the main relationships of its classes. It helps when someone enters your team, when you're leaving and want to make sure your successor will understand it, and when you eventually forget what the hell that little class was meant for.
Documenting any architectural pattern you use on all your systems, for the same reasons of the dot above
I only disagree with Michael when he says that using UML for a single developer and/or a simple software project seems overkill to him. I've used it on my small personal projects, and having them documented using UML saved me a lot of time when I came back to them seven months later and had completely forgotten how I had built and put together all those classes.
One of the problems I have with UML is the understandability of the specification. When I try to really understand the semantics of a particular diagram I quickly get lost in the maze of meta-models and meta-meta-models. One of the selling points of UML is that it is less ambiguous than natural language. However, if two, or more, engineers interpret a diagram differently, it fails at the goal.
Also, I've tried asking specific questions about the super-structure document on several UML forums, and to members of the OMG itself, with little or no results. I don't think the UML community is mature enough yet to support itself.
Coming from a student, I find that UML has very little use. I find it ironic that PROGAMERS have yet to develop a program that will automatically generate the things that you have said are necessary. It would be extremely simple to design a feature into Visual Studio that could pull pieces of the data, seek for definitions, and product answers sufficent so that anyone could look at it, great or small, and understand the program. This would also keep it up to date because it would take the information directly from the code to produce the information.
UML is used as soon as you represent a class with its fields and methods though it's just a kind of UML diagram.
The problem with UML is that the founders book is too vague.
UML is just a language, it's not really a method.
As for me, I really find annoying the lack of UML schema for Opensource Projects. Take something like Wordpress, you just have a database schema, nothing else. You have to wander around the codex api to try to get the big picture.
UML has its place. It becomes increasingly important as the size of the project grows. If you have a long running project, then it is best to document everything in UML.
UML seems to good for large projects with large teams of people. However I've worked in small teams where communication is better.
Using UML-esque diagrams is good though, especially in the planning stage. I tend to think in code, so I find writing large specs hard. I prefer to write down the inputs' and outputs' and leave the developers to design the bit in the middle.
I believe UML is useful just for the fact that it gets people to think about the relationships between their classes. It is a good starting point to start thinking about such relationships, but it is definitely not a solution for everybody.
My belief is that the use of UML is subjective to the situation in which the development team is working.
In my experience:
The ability to create and communicate meaningful code diagrams is a necessary skill for any software engineer who is developing new code, or attempting to understand existing code.
Knowing the specifics of UML - when to use a dashed line, or a circle endpoint - is not quite as necessary, but is still good to have.
UML is useful in two ways:
Technical side: a lot of people (manager and some functional analyst) think that UML is a luxury feature because The code is the documentation: you start coding, after you debug and fix. The sync of UML diagrams with code and analisys force you to understand well the requests of the customer;
Management side: the UMl diagrams are a mirror of the requires of the customer who is inaccurate: if you code without UML, maybe you can find a bug in requires after a lot of hours of work. The diagrams UML allow you to find the possible controversal points and to resolve before the coding =>help your planning.
Generally, all the projects without UML diagrams have a superficial analysis or they have short size.
if you're in linkedin group SYSTEMS ENGINEERS, see my old discussion.
UML is definitely helpful just as junit is essential. It all depends how you sell the idea. Your program will work without UML just as it would work without unit tests. Having said that, you should create do UML as along it is connected to your code, i.e when you update UML diagrams it updates your code, or when you update your code it auto generates the UML. Don't do just for the sake of doing it.
UML definetly has its place in the industry. Imagine you are building software for Boing aircraft or some other complex system. UML and RUP would be great help here.
In the end UML only exist because of RUP. Do we need UML or any of its related stuff to use Java/.Net ? The practical answer is they have their own documenation (javadoc etc) which is sufficient and lets us get our job done!
UML no thanx.
UML is just one of methods for communication within people.
Whiteboard is better.