I'm trying to add lmdb to my yocto build. This is my recipe:
LIC_FILES_CHKSUM = "file://LICENSE;md5=153d07ef052c4a37a8fac23bc6031972"
SRC_URI = " \
https://github.com/LMDB/lmdb/archive/LMDB_${PV}.tar.gz \
"
SRC_URI[md5sum] = "0de89730b8f3f5711c2b3a4ba517b648"
SRC_URI[sha256sum] = "49d7b40949f2ced9bc8b23ea6a89e75471a1c9126537a8b268c318a00b84322b"
BBFILE_PRIORITY = "8"
inherit autotools-brokensep
S = "${WORKDIR}/lmdb-LMDB_${PV}/libraries/liblmdb"
do_install() {
install -d ${D}${bindir}
install -d ${D}${libdir}
install -d ${D}${includedir}
install -d ${D}${mandir}
sed -i 's:\$(prefix)/man:${mandir}:' Makefile
oe_runmake DESTDIR=${D} prefix=${prefix} manprefix=${mandir} install
}
It compiles fine but I get an error during do_package task:
ERROR: objcopy failed with exit code 256 (cmd was 'aarch64-poky-linux-objcopy' --only-keep-debug '/media/build/tmp/work/aarch64-poky-linux/lmdb/0.9.16-r0/package/usr/bin/mdb_copy' '/media/build/tmp/work/aarch64-poky-linux/lmdb/0.9.16-r0/package/usr/bin/.debug/mdb_copy'): aarch64-poky-linux-objcopy: Unable to recognise the format of the input file `/media/build/tmp/work/aarch64-poky-linux/lmdb/0.9.16-r0/package/usr/bin/mdb_copy'
I tried including INHIBIT_PACKAGE_STRIP = "1" in my bb file. But it throws other errors:
ERROR: runstrip: ''aarch64-poky-linux-strip' --remove-section=.comment --remove-section=.note --strip-unneeded '/media/build/tmp/work/aarch64-poky-linux/lmdb/0.9.16-r0/sysroot-destdir/usr/lib/liblmdb.so'' strip command failed with 1 (aarch64-poky-linux-strip: Unable to recognise the format of the input file `/media/build/tmp/work/aarch64-poky-linux/lmdb/0.9.16-r0/sysroot-destdir/usr/lib/liblmdb.so'
)
ERROR: QA Issue: Architecture did not match (183 to 62) on work/aarch64-poky-linux/lmdb/0.9.16-r0/packages-split/lmdb-dev/usr/lib/liblmdb.so [arch]
WARNING: QA Issue: /usr/lib/liblmdb.so_lmdb-dev contained in package lmdb-dev requires libpthread.so.0(GLIBC_2.3.2)(64bit), but no providers found in its RDEPENDS [file-rdeps]
ERROR: QA Issue: Architecture did not match (183 to 62) on work/aarch64-poky-linux/lmdb/0.9.16-r0/packages-split/lmdb/usr/bin/mdb_dump [arch]
I'm on poky 2.0.2.
The github link doesnt exist.
However you can skip qa packaging with
do_package_qa[noexec] = "1"
Related
I am trying to compile this GitHub project I found and add the resulting shared library to my SDK.
The project uses CMake. My recipe can download, and build this project. The resulting binary files work as expected, the given .so files contain what I need. When trying to add the .so files to my image I get the errors
ERROR: dbcppp-1.0+gitrAUTOINC+917c925638-r0 do_package_qa: QA Issue: -dev package dbcppp-dev contains non-symlink .so '/usr/lib/libdbcppp.so'
-dev package dbcppp-dev contains non-symlink .so '/usr/lib/libxmlmm.so' [dev-elf]
ERROR: dbcppp-1.0+gitrAUTOINC+917c925638-r0 do_package_qa: QA Issue: dbcppp rdepends on dbcppp-dev [dev-deps]
ERROR: dbcppp-1.0+gitrAUTOINC+917c925638-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: Logfile of failure stored in: /home/michael/Documents/MAIN_Application/build-fb/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dbcppp/1.0+gitrAUTOINC+917c925638-r0/temp/log.do_package_qa.10943
ERROR: Task (/home/michael/Documents/MAIN_Application/MAIN_layers/meta-MAINapplication/recipes-core/dbcppp/dbcppp_0.0.bb:do_package_qa) failed with exit code '1'
My recipe is as follows:
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
SRC_URI = "gitsm://github.com/xR3b0rn/dbcppp.git;protocol=https;branch=master"
PV = "1.0+gitr${SRCPV}"
SRCREV = "${AUTOREV}"
S = "${WORKDIR}/git"
inherit pkgconfig cmake
INSANE_SKIP:${PN} = "ldflags"
INHIBIT_PACKAGE_STRIP = "1"
INHIBIT_SYSROOT_STRIP = "1"
SOLIBS = ".so"
FILES_SOLIBSDEV = ""
do_install() {
install -d ${D}${bindir}
install -m 0755 ${B}/bin/dbcppp ${D}${bindir}
install -d ${D}${libdir}
install -m 0755 ${B}/src/libdbcppp/libdbcppp.so ${D}${libdir}
install -m 0755 ${B}/libxmlmm.so ${D}${libdir}
install -m 0755 ${B}/third-party/libxml2/libxml2.so.2.9.10 ${D}${libdir}
}
FILES_${PN} += "${libdir}/*"
FILES_${PN}-dev = "${libdir}/* ${includedir}"
I have been searching for a while but I cannot find a solution. What do I need to do for this to work?
Edit 1: I updated my bb file to the following. This works but it does not place the necessary header files into my SDK.
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
SRC_URI = "gitsm://github.com/xR3b0rn/dbcppp.git;protocol=https;branch=master"
PV = "1.0+gitr${SRCPV}"
SRCREV = "${AUTOREV}"
S = "${WORKDIR}/git"
inherit cmake
INSANE_SKIP:${PN} = "ldflags"
INHIBIT_PACKAGE_STRIP = "1"
INHIBIT_SYSROOT_STRIP = "1"
SOLIBS = ".so"
FILES_SOLIBSDEV = ""
do_install() {
install -d ${D}${bindir}
install -m 0755 ${B}/bin/dbcppp ${D}${bindir}
install -d ${D}${libdir}
install -m 0755 ${B}/src/libdbcppp/libdbcppp.so ${D}${libdir}
install -m 0755 ${B}/libxmlmm.so ${D}${libdir}
install -m 0755 ${B}/third-party/libxml2/libxml2.so ${D}${libdir}
}
FILES_${PN} += "${libdir}/*.so"
FILES_${PN}-dev = "${includedir}"
The dbcppp Cmake file already has an install target that installs everything automatically, so you do not need do_install.
Try the following recipe:
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
SRC_URI = "gitsm://github.com/xR3b0rn/dbcppp.git;protocol=https;branch=master"
PV = "1.0+gitr${SRCPV}"
SRCREV = "${AUTOREV}"
S = "${WORKDIR}/git"
inherit cmake
FILES_${PN} += "/usr/lib/xml2Conf.sh /usr/lib/lib*.so.*"
SOLIBS = ".so"
FILES_SOLIBSDEV = ""
INSANE_SKIP_${PN} += "dev-so"
The non-versioned shared libraries .so topic is difficult in Yocto, that's why skipping the QA shared library issue is the way to go here if you have no control on the source project's files/libraries.
The above recipe splits into multiple packages:
dbcppp (If you want just the dbcppp binary (.so files are shipped for the binary to run)
dbcppp-dev (If you want the header files and the shared libraries)
dbcppp-doc (If you want the man and html pages)
I tried to build my custom recipe for the project which contains programs for sensors. All the task and library making is taken care of by CMakeLists.txt it also has python dependencies. I added all the required dependencies within my recipe and tried to build it using the "bitbake soofierecp" command execution got successful. Whereas while attempting to install it with the local.conf using "IMAGE_INSTALL += soofierecp" it is giving an error as listed below:
Error is:
ERROR: soofie-img-1.0-r0 do_rootfs: Could not invoke dnf. Command '/home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/recipe-sysroot-native/usr/bin/dnf -v --rpmverbosity=info -y -c /home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/rootfs/etc/yum.repos.d --installroot=/home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/rootfs --setopt=logdir=/home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/temp --repofrompath=oe-repo,/home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/oe-rootfs-repo --nogpgcheck install i2c-tools packagegroup-base-extended packagegroup-core-boot packagegroup-core-ssh-dropbear psplash python3 python3-dev python3-pip python3-requests run-postinsts soofierecp usbutils locale-base-en-us locale-base-en-gb' returned 1:
DNF version: 4.12.0
cachedir: /home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/rootfs/var/cache/dnf
Added oe-repo repo from /home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/oe-rootfs-repo
User-Agent: falling back to 'libdnf': could not detect OS or basearch
repo: using cache for: oe-repo
oe-repo: using metadata from Thu 26 May 2022 05:31:19 AM UTC.
Last metadata expiration check: 0:00:01 ago on Thu 26 May 2022 05:31:20 AM UTC.
No match for argument: soofierecp
Error: Unable to find a match: soofierecp
ERROR: Logfile of failure stored in: /home/anvation/nitish/source/build/tmp/work/qemux86_64-poky-linux/soofie-img/1.0-r0/temp/log.do_rootfs.1379711
ERROR: Task (/home/anvation/nitish/workspace/meta-soofie/recipes-example/images/soofie-img.bb:do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4873 tasks of which 4872 didn't need to be rerun and 1 failed. "added the meta-layer in bblayer.conf file"
Recipe is:
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
S = "${WORKDIR}"
PR = "r0"
DEPENDS = "openssl python3-six-native python3-pytest-runner-native"
SRC_URI = "\
file://src/ \
file://third_party/pybind11/ \
file://third_party/CLI11/ \
file://third_party/c-periphery/ \
file://CMakeLists.txt \
"
do_configure() {
cmake ../
}
RDEPENDS_${PN} = "python-requests python-six"
inherit pkgconfig cmake python3native
EXTRA_OEMAKE = ""
ALLOW_EMPTY_${PN}="1"
FILES_${PN} = "${bindir}/*"
DEPENDS += "udev"
Please help me to reach for the solution
I really appreciate any help you can provide.
I got the above code working with the suggestion and help
Thank you so much
The updated recipe is:
'
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
S = "${WORKDIR}"
PR = "r0"
SRC_URI = "\
file://src/ \
file://third_party/pybind11/ \
file://third_party/CLI11/ \
file://third_party/c-periphery/ \
file://CMakeLists.txt \
"
inherit cmake pkgconfig python3native
DEPENDS += "openssl python3-six-native python3-pytest-runner-native"
EXTRA_OECMAKE = ""
do_install() {
install -d ${D}${bindir}
install -m 0755 ${WORKDIR}/build/datagen ${D}${bindir}
}
DEPENDS += "udev"
FILES_${PN} += "${D}${bindir}/"
ALLOW_EMPTY_${PN} = "1"
'
On Ubuntu 18.04 I am trying to build a Yocto SD Card Image for the Nvidia Jetson Nano using the "meta-tegra" layer. I ran into the recent bzip2 issue that requires the latest bzip2 ( 1.0.7 ) to fix as detailed in these forum posts:
https://devtalk.nvidia.com/default/topic/1056301/b/t/post/5355418/
https://devtalk.nvidia.com/default/topic/1056381/jetson-agx-xavier/jetpack-4-2-xavier-install-failed/1
I found the latest bzip2 source here:
https://www.sourceware.org/bzip2/downloads.html
I tried playing with ${WORKDIR}, ${S}, do_compile_append, and do_install_append, however I keep getting errors related to the wrong source directory. I basically took the OE Bzip2 1.0.6 recipe and change the version source and checksums.
Please help me fix this build issue with yocto - thanks!
Bitbake Failure:
Initialising tasks: 100% |##########################################################################| Time: 0:00:00
Sstate summary: Wanted 382 Found 0 Missed 382 Current 45 (0% match, 10% complete)
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: bzip2-native-1.0.7-r5 do_compile: oe_runmake failed
ERROR: bzip2-native-1.0.7-r5 do_compile: Function failed: do_compile (log file is located at /home/ubuntu/Desktop/mts-jetson-yocto/build/tmp/work/x86_64-linux/bzip2-native/1.0.7-r5/temp/log.do_compile.115964)
ERROR: Logfile of failure stored in: /home/ubuntu/Desktop/mts-jetson-yocto/build/tmp/work/x86_64-linux/bzip2-native/1.0.7-r5/temp/log.do_compile.115964
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 128
| make: *** No targets specified and no makefile found. Stop.
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/ubuntu/Desktop/mts-jetson-yocto/build/tmp/work/x86_64-linux/bzip2-native/1.0.7-r5/temp/log.do_compile.115964)
ERROR: Task (virtual:native:/home/ubuntu/Desktop/mts-jetson-yocto/layers/meta-mts/recipes-extended/bzip2/bzip2_1.0.7.bb:do_compile) failed with exit code '1'
Second Keyboard Interrupt, stopping...
Summary: 1 task failed:
virtual:native:/home/ubuntu/Desktop/mts-jetson-yocto/layers/meta-mts/recipes-extended/bzip2/bzip2_1.0.7.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
Current Broken Bitbake recipe:
SECTION = "console/utils"
LICENSE = "bzip2"
LIC_FILES_CHKSUM = "file://LICENSE;beginline=4;endline=37;md5=39406315f540c69bd05b1531daedd2ae"
PR = "r5"
SRC_URI = "https://www.sourceware.org/pub/bzip2/bzip2-1.0.7.tar.gz \
"
#WORKDIR = "${WORKDIR}/bzip-1.0.7"
#WORKDIR = "${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}/bzip2-1.0.7"
#S = "${WORKDIR}/bzip2-1.0.7"
#do_compile_prepend() {
# cd ../
#}
#do_install_prepend() {
# cd ../
#}
SRC_URI[md5sum] = "1a6a61cc867be4f3d6549037a09bf13e"
SRC_URI[sha256sum] = "e768a87c5b1a79511499beb41500bcc4caf203726fff46a6f5f9ad27fe08ab2b"
UPSTREAM_CHECK_URI = "https://www.sourceware.org/bzip2/"
UPSTREAM_VERSION_UNKNOWN = "1"
PACKAGES =+ "libbz2"
CFLAGS_append = " -fPIC -fpic -Winline -fno-strength-reduce -D_FILE_OFFSET_BITS=64"
inherit autotools update-alternatives ptest relative_symlinks
ALTERNATIVE_PRIORITY = "100"
ALTERNATIVE_${PN} = "bunzip2 bzcat bzip2"
#install binaries to bzip2-native under sysroot for replacement-native
EXTRA_OECONF_append_class-native = " --bindir=${STAGING_BINDIR_NATIVE}/${PN}"
do_install_ptest () {
sed -i -e "s|^Makefile:|_Makefile:|" ${D}${PTEST_PATH}/Makefile
}
FILES_libbz2 = "${libdir}/lib*${SOLIBS}"
PROVIDES_append_class-native = " bzip2-replacement-native"
BBCLASSEXTEND = "native nativesdk"
#addtask fix_path before do_compile
Two ideas:
Just apply the patch for the security issue, much easier. This patch is already on the oe-core list.
Take the upgrade patch that is also on the list
I tried to append a layer from git (https://github.com/sigysmund/meta-lora-net) to my Image and whenever I try to bitbake one of the recipes (the other worked), I get this error message:
ERROR: lora-pkt-fwd-4.0.1-r0 do_configure: oe_runmake failed
ERROR: lora-pkt-fwd-4.0.1-r0 do_configure: Function failed: do_configure (log file is located at /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_configure.23440)
ERROR: Logfile of failure stored in: /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_configure.23440
(see last part for full message)
I have already tried to edit the bb file.
I changed the DEPENDS to "lora-gateway pkgconfig" instead of just the name since I read on another thread, that this can produce Issues but it didn't help.
This is the bb file of the recipe:
SUMMARY = "LoRa network packet forwarder project"
SECTION = "libs/network"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://LICENSE;md5=22af7693d7b76ef0fc76161c4be76c45"
SRC_URI = "https://github.com/Lora-net/packet_forwarder/archive/v${PV}.tar.gz"
SRC_URI[md5sum] = "a1f942e0cc7b02d604b11c8cb5f2a029"
SRC_URI[sha256sum] = "e68fadf6f1d2e5e7b601e504d5efb48b0a8f374c2c29c0476ab2fe9db68d33ae"
#old: DEPENDS += "lora-gateway"
# since new release of yocto you should add pkg-config
DEPENDS += "lora-gateway pkgconfig"
S = "${WORKDIR}/packet_forwarder-${PV}"
CFLAGS_append = "-I ${includedir}/libloragw -I ${S}/lora_pkt_fwd/inc -I ${S}/util_tx_test/inc "
do_configure_prepend() {
export LGW_PATH="${STAGING_LIBDIR}/libloragw"
}
do_compile_prepend() {
export LGW_PATH="${STAGING_LIBDIR}/libloragw"
}
do_install() {
install -d ${D}${bindir}
install -d ${D}${docdir}/lora-pkt-fwd/conf
install ${B}/lora_pkt_fwd/lora_pkt_fwd ${D}${bindir}
install ${B}/util_*/util_* ${D}${bindir}
install -D -m 0644 ${S}/PROTOCOL.TXT ${D}${docdir}/lora-pkt-fwd/PROTOCOL.TXT
install -D -m 0644 ${S}/lora_pkt_fwd/readme.md ${D}${docdir}/lora-pkt-fwd/readme.md
install -D -m 0644 ${S}/lora_pkt_fwd/global_conf.json ${D}${docdir}/lora-pkt-fwd/global_conf.json
install -D -m 0644 ${S}/lora_pkt_fwd/local_conf.json ${D}${docdir}/lora-pkt-fwd/local_conf.json
install -D -m 0755 ${S}/lora_pkt_fwd/update_gwid.sh ${D}${docdir}/lora-pkt-fwd
install -D -m 0644 ${S}/lora_pkt_fwd/cfg/*.json.* ${D}${docdir}/lora-pkt-fwd/conf
rm -f ${D}${bindir}/util_tx_test
rm -f ${D}${bindir}/.debug/util_tx_test
}
PACKAGE_DEBUG_SPLIT_STYLE = "debug-without-src"
PACKAGES = "${PN}-dbg ${PN} ${PN}-doc"
# Avoid QA Issue: No GNU_HASH in the elf binary
INSANE_SKIP_${PN} = "ldflags"
FILES_${PN}-dbg = " \
${bindir}/.debug \
"
FILES_${PN} = " \
${bindir}/* \
"
FILES_${PN}-doc = " \
${docdir} \
"
the full error is:
ERROR: lora-pkt-fwd-4.0.1-r0 do_configure: oe_runmake failed
ERROR: lora-pkt-fwd-4.0.1-r0 do_configure: Function failed: do_configure (log file is located at /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_configure.23440)
ERROR: Logfile of failure stored in: /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_configure.23440
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: make clean
| ERROR: oe_runmake failed
| make clean -e -C lora_pkt_fwd
| make[1]: Entering directory `/home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/packet_forwarder-4.0.1/lora_pkt_fwd'
| Makefile:17: /home/kilian/mlinux-4.x/build/tmp/sysroots/mtcdt/usr/lib/libloragw/library.cfg: No such file or directory
| make[1]: *** No rule to make target `/home/kilian/mlinux-4.x/build/tmp/sysroots/mtcdt/usr/lib/libloragw/library.cfg'. Stop.
| make[1]: Leaving directory `/home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/packet_forwarder-4.0.1/lora_pkt_fwd'
| make: *** [clean] Error 2
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_configure.23440)
ERROR: Task (/home/kilian/mlinux-4.x/layers/meta-custom/recipes-wireless/lora-pkt-fwd/lora-pkt-fwd_4.0.1.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1590 tasks of which 1580 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/kilian/mlinux-4.x/layers/meta-custom/recipes-wireless/lora-pkt-fwd/lora-pkt-fwd_4.0.1.bb:do_configure
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
I know that is has got something to do with the libloragw/library.cfg file but since that is imported and I don't know enough about these scripts, I can't find the error.
Any hint is really appreciated!
P.s I didn't include the logfiles since everything in there is already in the Log data follows part of the error. If you need it I can upload it.
Edit:
Thank you jku, appending CLEANBROKEN = "1" fixed this error.
Sadly I am getting a new one:
ERROR: lora-pkt-fwd-4.0.1-r0 do_compile: oe_runmake failed
ERROR: lora-pkt-fwd-4.0.1-r0 do_compile: Function failed: do_compile (log file is located at /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_compile.24486)
ERROR: Logfile of failure stored in: /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_compile.24486
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 2
| ERROR: oe_runmake failed
| make all -e -C lora_pkt_fwd
| make[1]: Entering directory `/home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/packet_forwarder-4.0.1/lora_pkt_fwd'
| Makefile:17: /home/kilian/mlinux-4.x/build/tmp/sysroots/mtcdt/usr/lib/libloragw/library.cfg: No such file or directory
| make[1]: *** No rule to make target `/home/kilian/mlinux-4.x/build/tmp/sysroots/mtcdt/usr/lib/libloragw/library.cfg'. Stop.
| make[1]: Leaving directory `/home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/packet_forwarder-4.0.1/lora_pkt_fwd'
| make: *** [all] Error 2
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/kilian/mlinux-4.x/build/tmp/work/arm926ejste-mlinux-linux-gnueabi/lora-pkt-fwd/4.0.1-r0/temp/log.do_compile.24486)
So there is still a problem with the libloragw/library.cfg file
I did check and there is such a file in the recipe given by the DEPENDS variable so I guess that including that and the corresponding commands don't work
CFLAGS_append = "-I ${includedir}/libloragw -I ${S}/lora_pkt_fwd/inc -I ${S}/util_tx_test/inc "
do_configure_prepend() {
export LGW_PATH="${STAGING_LIBDIR}/libloragw"
}
do_compile_prepend() {
export LGW_PATH="${STAGING_LIBDIR}/libloragw"
}
But I still don't know what to edit so any help is precious.
| DEBUG: Executing shell function do_configure
| NOTE: make clean
| ERROR: oe_runmake failed
| make clean -e -C lora_pkt_fwd
Yocto/OpenEmbedded tries to run "make clean" during configure to ensure a reproducible build but this particular project fails to do so cleanly. You can either fix the project (patching the Makefile) or add
CLEANBROKEN = "1"
in the recipe: this way OpenEmbedded won't run make clean on configure.
I am using latest poky-am335x to build simple helloworld application. With some workaround I can able to compile the application. I am doing lot of trails to install binaries but build is throwing error.
error log :
DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
DEBUG: Executing shell function do_install
NOTE: make -j 4 DESTDIR=/home/pis1kor/workspace/poky-am335x/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/helloworld-1.0-r0/image install
make: *** No rule to make target `install'. Stop.
ERROR: oe_runmake failed
ERROR: Function failed: do_install (see /home/pis1kor/workspace/poky-am335x/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/helloworld-1.0-r0/temp/log.do_install.29583 for further information)
Bitbake file :
DESCRIPTION = "Simple helloworld application"
SECTION = "examples"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
PR = "r0"
SRC_URI = "file://helloworld.tar"
do_compile () {
make -C ${WORKDIR}/helloworld all
}
do_install() {
oe_runmake install DESTDIR=${D}
}
#do_install() {
# oe_runmake install DESTDIR=${D}
# make -C ${WORKDIR}/helloworld/ install
# oe_runmake 'DESTDIR=${D}' install
# cp -f ${WORKDIR}/helloworld/helloworld ${WORKDIR}/image
# oe_runmake install ${WORKDIR}/helloworld
# make -C ${WORKDIR}/helloworld install
# install -d ${D}${bindir}/ ZZ
#}
inherit autotools gettext
Makefile :
IDIR = ./include
CC = arm-arago-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 --sysroot=/home/pis1kor/workspace/poky-am335x/build/tmp/sysroots/am335x-evm
CFLAGS = -I$(IDIR)
LIBS = -lm
FILES = ./src/helloworld.c
OUT_EXE = helloworld
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
all: $(FILES)
$(CC) -o $(OUT_EXE) $(FILES) $(CFLAGS) $(LIBS)
install:
$(INSTALL_DATA) -C helloworld ../image
# sudo cp ./helloworld ../image/
clean:
rm -f *.o helloworld
The commented lines are kept like that because just to mansion all the trails I tried with.
The basic differences are the below.
S = "${WORKDIR}/helloworld/"
EXTRA_OEMAKE = 'all -C ${S}'
"EXTRA_OEMAKE" is the key macro which I didn't used before.
I have changed the bitbake file helloworld.bb file like below.
DESCRIPTION = "Simple helloworld application"
SECTION = "examples"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
PR = "r0"
S = "${WORKDIR}/helloworld/"
EXTRA_OEMAKE = 'all -C ${S}'
SRC_URI = "file://helloworld.tar"
inherit autotools gettext