This image is showing the size of my right click menu
Basically, it is changed, I don't know how so I just want to decrease its size and restore to default. How can I do it?
Seems like the "Open command window here as administrator" part might be the source of your problem. Search your registry for that string and rename or remove the parts you don't need.
Related
I must have hit a setting in ST3 and caused my program to display results in a panel instead of in a buffer. How do I get it back so that find-text results go into their own tab? I've done some digging around but I can't find what I did.
In the Find in Files panel, there is a series of buttons to the left of the Find field, and the right most one of those is the one that controls whether the find results show up in a panel or in a buffer.
Note that the button may look different in your version as it appears that you're using a different theme (the image below shows the default theme). You can verify that you have the correct button based on the tool tip text.
I'm building an app with Android Studio, and one of my activities (which lets the user draw on a canvas) has a 'toolbar', with things like 'Clear', 'Undo', 'Redo' etc.
I'm using the built-in icons for this - ie I go to the 'Drawables' folder, right-click, go to 'Add vector asset' and then select the appropriate icon. I've figured out that I can change the size of the icon that gets added, but I can't figure out how to use that.
So, on a phone screen, I'd like to use the standard 24dp icons. However, on a tablet screen, I'd like the icon to be bigger, as they're a bit lost on the bigger screen.
I can't figure out how to do this, though, and I'm not even sure whether I'm using the right approach. I know I can create different drawables sub-folders for different densities, but it's not so much the density that matters as the actual screen size.
What's the best way to go about this?
You should increase the toolbar height, the icon will fit its container automatically.
In case, if you want to change the size of the icon, double-click the xml file of the icon and change the width and height inside. Do not touch the viewportWidth and viewportHeight parameters!
In general, you should not do this, as it wouldn't follow the google guidelines.
app:itemIconsize="30dp"
How to restore the VBA Editor to its intial settings ? I have some troubles with macro and projects explorer windows settings, after some bad manipulations.
The only way I know how to accomplish this is to edit the registry.
Close All Office programs
Open a command prompt and type regedit
Navigate to HKEY_CURRENTUSER\Software\Microsoft\VBA\6.0\Common
Right click on Common and Export to save the *.reg file somewhere safe. This is your back up. Double clicking this file will restore your current settings.
Right click on Common and Delete it. Doing this will remove all of
its subkeys that hold your personal settings.
The "Common" key will be recreated the next time you close the VBA Editor along with any changes to the settings you may make.
I have the same issue, it's simple:
TOOLS
OPTIONS
DOCKING
Then select Object Browser, Project Explorer and that's all.
I had the same problem and realised that if I double click the blue heading of a minimal floating menu, such as the Project-VBAProject menu, it would resize and fit in with the other menus that are expanded. With a bit of moving around and double clicking the headers of the menus that I had selected from the VIEW option, I could get the screen back to the way it originally looked at the default setting of the VBA editor.
Phil
Solution Using a Mac and Excel 2016.
I found that I could drag the, e.g., project explorer (pe) window toward the edge of the vb window and the outline of the pe window moves and adjusts once you get close enough to the edge. This also works with the other windows as you bring them into view.
My default view is project explorer upper left, properties lower left. To return these to be in that order, drag the one to that location (which will fill that whole area) then drag the other one right on top of that one. That stacks them in the same column and then you can adjust their size within those locations.
I had this same issue and fought with it for literally 2 days. Finally figured it out!!!
xD First close the Project Explorer and the Properties windows using the X at the top right. Then go to Options under the Docking tab. Uncheck all boxes. Close the options window and if desired check to see that everything is undocked. Now go back to Options>Docking and check all the boxes you had checked (default is all but object browser). Your windows should have returned to default.
This may not solve the OPs original question of "default" for all, but in my case and possibly others I was looking to re-dock the "Project Explorer" and have modules pop up next to it like default. I'm not sure about other settings, but this is how I restored the above behavior.
In the project explorer right click and select "Dockable". Then insert a module and maximize it. This should restore what I consider default behavior.
Actually, it is very easy. You just have to go to View Tab then Click on the Project Explorer & Properties Window. It worked for me because I lost these two and now I got it by doing this. I hope so you will get the same result as well. View the image for more clarity.
Simple steps. Works for Mac , maybe windows too
Close all the tabs in the VBE
View --> Code . This will occupy entire space
After that ,view --> project explorer. this will pop up a tab, drag that tab to the top left corner. It auto fills into a small column which you can drag according to your preference .
Now select view --> properties window and drag the tab to bottom left.
Additional step ( if you use locals window )
Select locals window from view and drag it to the bottom.
Right click any of the window you want to move and click "Dockable". This should allow you to move all the windows as you want and place them as you wish.
I had all menus and windows missing, like no "File", no "Edit", no "View", etc.
Here's what I did:
Closed Excel
Opened the Registry Editor
Navigated to HKEY_CURRENTUSER\Software\Microsoft\VBA
Right clicked on VBA and renamed to VBA_old
Closed the Registry Editor
Opened Excel
Opened Visual Basic
…and voila, VBA was back to normal!
After that, I:
Reopened the Registry Editor and saw that VBA had been recreated
Deleted VBA_old
I'm not aware of a 'reset' command but the starting point would be to go to the View menu and start by setting the Code, Project Explorer and Properties windows and then the Toolbars>Standard (toolbar) perhaps?
I've downloaded and am using the VNX 5300 stencil/shape from https://download.emc.com/downloads/DL38235_VNX_Visio_Stencil.zip (I had to create a free account to download it).
I can hit F2 to edit the text, as normal, but it will not display. On other downloaded shapes/stencils, if I right-clicked on the shape/stencil, I would have the option to hide/show shape text, but it doesn't exist on this one. I have looked in the shapesheet data, and "hide text" is already set to false. In developer options, the text is not protected.
Is there a way to force the text to display? I hope to learn how to fix this problem, rather than band-aid it and merely add a second text box.
This stencil was created oddly. I had to right-click and ungroup from master. Then I had to, again, right-click and ungroup a second time. After the two ungroup actions (from its original format--I did NOT group it to anything, whatsoever), I was able to edit the text and see it, but cannot move it. The shapesheet then showed the "text transform" options so I can pin it, but again, cannot move it to the location I want.
I then had to completely frankenstein and butcher the shapesheet text transform to barely get it moved where I wanted. Adding a text control handle was not possible.
This is a faulty stencil made by EMC, apparently, as I have not had these problems with any of the other brands' stencils I've downloaded.
I am in process of creating a dialog IDD_DIALOG2 which i want to be in the same size as existing dialog IDD_DIALOG1, what would be the easiest way to do this in VC++?
Just resize in design view. The dialog's size shows up in the status bar.
(you could also edit the .rc file and copy the 4 numbers that follow the dialog's ID)
The sane way would be to look up the IDD_DIALOG1's dialog definition and use the same sizes.
If you don't have access to IDD_DIALOG1's dialog definition, you could bring up IDD_DIALOG1, use GetWindowRect() on it to record its actual size, close it, open IDD_DIALOG2, and then use MoveWindow() to resize to the same size. Not generally recommended, but it's possible.
It's possible to copy & paste the dialog in the Resource View - all the controls come with it also.