I am new to shell scripting. I am using ksh.
I have this particular line in my script which I use to append text in a variable q to the end of a particular line given by the variable a
containing the line number .
sed -i ''$a's#$#'"$q"'#' test.txt
Now the variable q can contain a large amount of text, with all sorts of special characters, such as !##$%^&*()_+:"<>.,/;'[]= etc etc, no exceptions. For now, I use a couple of sed commands in my script to remove any ' and " in this text (sed "s/'/ /g" | sed 's/"/ /g'), but still when I execute the above command I get the following error
sed: -e expression #1, char 168: unterminated `s' command
Any sed, awk, perl, suggestions are very much appreciated
The difficulty here is to quote (escape) the substitution separator characters # in the sed command:
sed -i ''$a's#$#'"$q"'#' test.txt
For example, if q contains # it will not work. The # will terminate the replacement pattern prematurely. Example: q='a#b', a=2, and the command expands to
sed -i 2s#$#a#b# test.txt
which will not append a#b to the end of line 2, but rather a#.
This can be solved by escaping the # characters in q:
sed -i 2s#$#a\#b# test.txt
However, this escaping could be cumbersome to do in shell.
Another approach is to use another level of indirection. Here is an example of using a Perl one-liner. First q is passed to the script in quoted form. Then, within the script the variable assigned to a new internal variable $q. Using this approach there is no need to escape the substitution separator characters:
perl -pi -E 'BEGIN {$q = shift; $a = shift} s/$/$q/ if $. == $a' "$q" "$a" test.txt
Do not bother trying to sanitize the string. Just put it in a file, and use sed's r command to read it in:
echo "$q" > tmpfile
sed -i -e ${a}rtmpfile test.txt
Ah, but that creates an extra newline that you don't want. You can remove it with:
sed -e ${a}rtmpfile test.txt | awk 'NR=='$a'{printf $0; next}1' > output
Another approach is to use the patch utility if present in your system.
patch test.txt <<-EOF
${a}c
$(sed "${a}q;d" test.txt)$q
.
EOF
${a}c will be replaced with the line number followed by c which means the operation is a change in line ${a}.
The second line is the replacement of the change. This is the concatenated value of the original text and the added text.
The sole . means execute the commands.
I have the following sed commands that replace a block of text with the contents of a file between the start & end markers /**##+ and **##-* respectively:
sed -i -ne '/**##+/ {p; r block.txt' -e ':a; n; /**##-*/ {p; b}; ba}; p' -e '/**##+/d' test.txt && sed -i -e '/**##+/d' -e '/**##-*/d' test.txt
(Besides replacing text, the command also converts line endings.)
As it is, this leaves the start and end markers intact, but I want to get rid of those as well. My using the p command means that I can't have a d command in the same execution unit. I work around the problem by introducing a second set of commands that delete those markers, but I would like to have it all in one single sed command, if possible.
test.txt
start of file
/**##+
* the start marker is above
*/
this should get replaced
/**##-*/
end marker is above
block.txt
THIS IS THE REPLACEMENT
Results
Running the command should change test.txt like so:
start of file
THIS IS THE REPLACEMENT
end marker is above
I am looking for the shortest, single-line solution in sed.
This might work for you (GNU sed):
sed '/^\/\*\*##+/,/^\/\*\*##-\*/cThis is the replacement' file
This changes the lines between the range to the required string.
To replace a range with contents of a file use:
sed -e '/^\/\*\*##+/!b;:a;N;/^\/\*\*##-\*/M!ba;r replacementFile' -e 'd' file
On encountering the start of the range set up a loop to gather up the range in the pattern space, then read the replacement file into the standard output and delete the contents of the pattern space.
Your start and end tags contain regex meta characters and /. sed only searches an input by regex and you need to escape / and all of those meta-characters in sed.
It is much easier to handle this in awk as awk allows non-regex plain text search also:
awk -v st='/**##+' -v et='/**##-*/' -v repl="$(<block.txt)" '
$0 == st{del=1} $0 == et{$0 = repl; del=0} !del' file
start of file
THIS IS THE REPLACEMENT
end marker is above
In looking for a command to delete a line (or lines) from a text file that contain a certain string.
For example
I have a text file as follows
Sat 21-12-2014,10.21,78%
Sat 21-12-2014,11.21,60%
Sun 22-12-2014,09.09,21%
I want to delete all lines that have "21-12-2014" in them.
I'm not able to find a solution that works.
According to #twalberg there is more three alternate solution for this question, which I'm explaining is as follows for future reader of this question for more versatile solutions:
With grep command
grep -v 21-12-2014 filename.txt
explanations:
-v is used to find non-matching lines
With awk command
awk '! /21-12-2014/' filename.txt
explanations:
! is denoting it will print all other lines that contain match of the string. It is not operator signify ignorance.
With sed command
sed -e '/21-12-2014/d' < filename.txt
explanations:
-e is signify scripted regex to be executed
d is denoting delete any match
< is redirecting the input file content to command
Try doing this :
sed -i.bak '/21-12-2014/d' *
A bit of explanations :
sed : the main command line, put the mouse pointer on sed
-i.bak : replace the file in place and make a backup in a .bak file
// is the regex
d means: delete
So I have a sed command that looks like this:
sed -n "/DXImageTransform.Microsoft.AlphaImageLoader(src='/,/',sizingMethod='crop');/p"
/Users/ME/Documents/weather/yahooWeather.html > /Users/ME/Documents/weather/out.txt
And it correctly gets the HTML that I want out of the file, however it still has the strings that I used to search for it (i.e. "DXImageTransform.Microsoft.AlphaImageLoader(src='" & "',sizingMethod='crop');" on the beginning and the end of the file. I'd like to remove those two strings. How can I modify my command to do this?
This should work:
sed -n -e "1,/START/d" -e "/END/,$d" -e p file.html
I separated 3 commands there using the -e options but you could put them all together separated by ;.
And this is what they do:
1,/START/d -- deletes a range: from the first line of the file until the line matching the pattern /START/
/END/,$d -- deletes a range: from the line matching the pattern until the end of the file
p -- print the line (these are lines not matched by previous patterns)
UPDATE
If the pattern is on the first line, the above won't work. With GNU sed, you can fix that like this:
sed -n -e "0,/START/d" -e "/END/,$d" -e p file.html
Unfortunately this won't work with BSD sed.
I have a text file which has a particular line something like
sometext sometext sometext TEXT_TO_BE_REPLACED sometext sometext sometext
I need to replace the whole line above with
This line is removed by the admin.
The search keyword is TEXT_TO_BE_REPLACED
I need to write a shell script for this. How can I achieve this using sed?
You can use the change command to replace the entire line, and the -i flag to make the changes in-place. For example, using GNU sed:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
You need to use wildcards (.*) before and after to replace the whole line:
sed 's/.*TEXT_TO_BE_REPLACED.*/This line is removed by the admin./'
The Answer above:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
Works fine if the replacement string/line is not a variable.
The issue is that on Redhat 5 the \ after the c escapes the $. A double \\ did not work either (at least on Redhat 5).
Through hit and trial, I discovered that the \ after the c is redundant if your replacement string/line is only a single line. So I did not use \ after the c, used a variable as a single replacement line and it was joy.
The code would look something like:
sed -i "/TEXT_TO_BE_REPLACED/c $REPLACEMENT_TEXT_STRING" /tmp/foo
Note the use of double quotes instead of single quotes.
The accepted answer did not work for me for several reasons:
my version of sed does not like -i with a zero length extension
the syntax of the c\ command is weird and I couldn't get it to work
I didn't realize some of my issues are coming from unescaped slashes
So here is the solution I came up with which I think should work for most cases:
function escape_slashes {
sed 's/\//\\\//g'
}
function change_line {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | escape_slashes)
# FIX: No space after the option i.
sed -i.bak '/'"${OLD_LINE_PATTERN}"'/s/.*/'"${NEW}"'/' "${FILE}"
mv "${FILE}.bak" /tmp/
}
So the sample usage to fix the problem posed:
change_line "TEXT_TO_BE_REPLACED" "This line is removed by the admin." yourFile
All of the answers provided so far assume that you know something about the text to be replaced which makes sense, since that's what the OP asked. I'm providing an answer that assumes you know nothing about the text to be replaced and that there may be a separate line in the file with the same or similar content that you do not want to be replaced. Furthermore, I'm assuming you know the line number of the line to be replaced.
The following examples demonstrate the removing or changing of text by specific line numbers:
# replace line 17 with some replacement text and make changes in file (-i switch)
# the "-i" switch indicates that we want to change the file. Leave it out if you'd
# just like to see the potential changes output to the terminal window.
# "17s" indicates that we're searching line 17
# ".*" indicates that we want to change the text of the entire line
# "REPLACEMENT-TEXT" is the new text to put on that line
# "PATH-TO-FILE" tells us what file to operate on
sed -i '17s/.*/REPLACEMENT-TEXT/' PATH-TO-FILE
# replace specific text on line 3
sed -i '3s/TEXT-TO-REPLACE/REPLACEMENT-TEXT/'
for manipulation of config files
i came up with this solution inspired by skensell answer
configLine [searchPattern] [replaceLine] [filePath]
it will:
create the file if not exists
replace the whole line (all lines) where searchPattern matched
add replaceLine on the end of the file if pattern was not found
Function:
function configLine {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | sed 's/\//\\\//g')
touch "${FILE}"
sed -i '/'"${OLD_LINE_PATTERN}"'/{s/.*/'"${NEW}"'/;h};${x;/./{x;q100};x}' "${FILE}"
if [[ $? -ne 100 ]] && [[ ${NEW_LINE} != '' ]]
then
echo "${NEW_LINE}" >> "${FILE}"
fi
}
the crazy exit status magic comes from https://stackoverflow.com/a/12145797/1262663
In my makefile I use this:
#sed -i '/.*Revision:.*/c\'"`svn info -R main.cpp | awk '/^Rev/'`"'' README.md
PS: DO NOT forget that the -i changes actually the text in the file... so if the pattern you defined as "Revision" will change, you will also change the pattern to replace.
Example output:
Abc-Project written by John Doe
Revision: 1190
So if you set the pattern "Revision: 1190" it's obviously not the same as you defined them as "Revision:" only...
bash-4.1$ new_db_host="DB_HOSTNAME=good replaced with 122.334.567.90"
bash-4.1$
bash-4.1$ sed -i "/DB_HOST/c $new_db_host" test4sed
vim test4sed
'
'
'
DB_HOSTNAME=good replaced with 122.334.567.90
'
it works fine
To do this without relying on any GNUisms such as -i without a parameter or c without a linebreak:
sed '/TEXT_TO_BE_REPLACED/c\
This line is removed by the admin.
' infile > tmpfile && mv tmpfile infile
In this (POSIX compliant) form of the command
c\
text
text can consist of one or multiple lines, and linebreaks that should become part of the replacement have to be escaped:
c\
line1\
line2
s/x/y/
where s/x/y/ is a new sed command after the pattern space has been replaced by the two lines
line1
line2
cat find_replace | while read pattern replacement ; do
sed -i "/${pattern}/c ${replacement}" file
done
find_replace file contains 2 columns, c1 with pattern to match, c2 with replacement, the sed loop replaces each line conatining one of the pattern of variable 1
To replace whole line containing a specified string with the content of that line
Text file:
Row: 0 last_time_contacted=0, display_name=Mozart, _id=100, phonebook_bucket_alt=2
Row: 1 last_time_contacted=0, display_name=Bach, _id=101, phonebook_bucket_alt=2
Single string:
$ sed 's/.* display_name=\([[:alpha:]]\+\).*/\1/'
output:
100
101
Multiple strings delimited by white-space:
$ sed 's/.* display_name=\([[:alpha:]]\+\).* _id=\([[:digit:]]\+\).*/\1 \2/'
output:
Mozart 100
Bach 101
Adjust regex to meet your needs
[:alpha] and [:digit:]
are Character Classes and Bracket Expressions
This worked for me:
sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
An example is:
sed -i .bak -e '7s/.*version.*/ version = "4.33.0"/'
-i: The extension for the backup file after the replacement. In this case, it is .bak.
-e: The sed script. In this case, it is '7s/.*version.*/ version = "4.33.0"/'. If you want to use a sed file use the -f flag
s: The line number in the file to be replaced. In this case, it is 7s which means line 7.
Note:
If you want to do a recursive find and replace with sed then you can grep to the beginning of the command:
grep -rl --exclude-dir=<directory-to-exclude> --include=\*<Files to include> "<Line to be replaced>" ./ | sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
The question asks for solutions using sed, but if that's not a hard requirement then there is another option which might be a wiser choice.
The accepted answer suggests sed -i and describes it as replacing the file in-place, but -i doesn't really do that and instead does the equivalent of sed pattern file > tmp; mv tmp file, preserving ownership and modes. This is not ideal in many circumstances. In general I do not recommend running sed -i non-interactively as part of an automatic process--it's like setting a bomb with a fuse of an unknown length. Sooner or later it will blow up on someone.
To actually edit a file "in place" and replace a line matching a pattern with some other content you would be well served to use an actual text editor. This is how it's done with ed, the standard text editor.
printf '%s\n' '/TEXT_TO_BE_REPLACED/' d i 'This line is removed by the admin' . w q | \
ed -s /tmp/foo > /dev/null
Note that this only replaces the first matching line, which is what the question implied was wanted. This is a material difference from most of the other answers.
That disadvantage aside, there are some advantages to using ed over sed:
You can replace the match with one or multiple lines without any extra effort.
The replacement text can be arbitrarily complex without needing any escaping to protect it.
Most importantly, the original file is opened, modified, and saved. A copy is not made.
How it works
How it works:
printf will use its first argument as a format string and print each of its other arguments using that format, effectively meaning that each argument to printf becomes a line of output, which is all sent to ed on stdin.
The first line is a regex pattern match which causes ed to move its notion of "the current line" forward to the first line that matches (if there is no match the current line is set to the last line of the file).
The next is the d command which instructs ed to delete the entire current line.
After that is the i command which puts ed into insert mode;
after that all subsequent lines entered are written to the current line (or additional lines if there are any embedded newlines). This means you can expand a variable (e.g. "$foo") containing multiple lines here and it will insert all of them.
Insert mode ends when ed sees a line consisting of .
The w command writes the content of the file to disk, and
the q command quits.
The ed command is given the -s switch, putting it into silent mode so it doesn't echo any information as it runs,
the file to be edited is given as an argument to ed,
and, finally, stdout is thrown away to prevent the line matching the regex from being printed.
Some Unix-like systems may (inappropriately) ship without an ed installed, but may still ship with an ex; if so you can simply use it instead. If have vim but no ex or ed you can use vim -e instead. If you have only standard vi but no ex or ed, complain to your sysadmin.
It is as similar to above one..
sed 's/[A-Za-z0-9]*TEXT_TO_BE_REPLACED.[A-Za-z0-9]*/This line is removed by the admin./'
Below command is working for me. Which is working with variables
sed -i "/\<$E\>/c $D" "$B"
I very often use regex to extract data from files I just used that to replace the literal quote \" with // nothing :-)
cat file.csv | egrep '^\"([0-9]{1,3}\.[0-9]{1,3}\.)' | sed s/\"//g | cut -d, -f1 > list.txt