In a given text file, I would like to work on a "filtered view" (hiding lines with a pattern), but still to be able to edit visible lines : the filtering would only affect the visibility of some lines, and as soon as I would reset the filter, the hidden lines would appear again.
The feature I describe could be compared to the & key in the less command (except, of course, that less can't edit the file's content) :
&some_pattern <RETURN> starts a new filter,
& <RETURN> reset the filter.
Does such a feature exist in vim, natively or as a plugin?
This usually is done with folding; you can easily define a 'foldexpr' that filters lines based on a regular expression match; see Folding with Regular Expression for implementations.
However, a single fold line will remain for each condensed block. To do away with those, I can only think of the NrrwRgn plugin, which transfers selected lines into a separate scratch buffer. It's usually only for a single block, but :help NR-multi-example suggests this works on ranges, too:
For example before editing your config file, you decide to strip all comments
for making big changes but when you write your changes back, these comments
will stay in your file. You would do it like this: >
:v/^#/NRP
:NRMulti
It can be done with plain Vim, and it's named folding. Drew Neil has two screencasts about it that you might find informative.
Anybody, any idea??
which plugin is showing the indentation guide in the image below. Downloaded from http://leetless.de/images/vim/pyte.png
.png
Thanks
A similar effect could be achieved with:
set list
set listchars+=tab:\│┈
Maybe with another filler character.
See :help 'list' and :help 'listchars'.
But…
As I was writing that answer it appeared to me that the answer was probably in the colorscheme's author's ~/.vimrc.
I think that you should really work on sharpening your deduction skills. It takes about 30 seconds to 1 minute to find that information by yourself:
Go to the site where you get that pic from: http://leetless.de
Look around for something Vim-related. The navigation is generally the first place to go and what do you find? "Vim themes" at http://leetless.de/vim.html
That image illustrates the first "theme" featured, that's a good sign. But let's read the introduction text (emphasis mine, typos his):
If you are curious what some other things are (like the indetation markers) and how they work, take a look at my .vimrc. Note that the encoding is broken with that file so the "set lcs" part is probably not copy-pasteable, follow the instructions in the comments above that line in order to find out how you can make your own unicode-lcs.
Wow! It looks like you are getting closer to the truth. Beware of the Cigarette Man!
Follow the link and do a search for lcs.
Done.
Not sure what you mean by "indentation guide", but I don't think any plugin is involved.
The first thing I see that you might be referring to is the characters at the beginning of lines indicating where there are tabs. That can be done by doing setting the listchars option to an appropriate value, turning the list option on, and selecting a color for the SpecialKey highlight group.
The other thing you might be referring to is highlighting of the column that currently contains the cursor. That can be done by turning on the cursorcolumn option. The color used for that can be set with the CursorColumn highlight group.
There's also a plugin, vim-indent-guides
Here's a nice plugin for vim: https://github.com/Yggdroot/indentLine
Yes, that title is the best I could come up with :-)
I have a text, and when activating spellchecking naturally a lot of words come out highlighted. Like emails, adresses, names and so on. How to tell Vim that some word is okey, without adding it to the wordlist.
Meaning, just, while editing this document I don't want to see my name highlighted.
Try: zG
:help internal-wordlist
From http://vimdoc.sourceforge.net/htmldoc/spell.html
zg Add word under the cursor as a good word to the first
name in 'spellfile'. A count may precede the command
to indicate the entry in 'spellfile' to be used. A
count of two uses the second entry.
In Visual mode the selected characters are added as a
word (including white space!).
When the cursor is on text that is marked as badly
spelled then the marked text is used.
Otherwise the word under the cursor, separated by
non-word characters, is used.
If the word is explicitly marked as bad word in
another spell file the result is unpredictable.
I have my Vim config in a git repository, which is useful for several things; For example, you could alias your vim to a small script that invokes Vim normally, but after Vim finishes checks if the ~/.vim/spell directory has any modifications and if so, asks you if you want to keep or discard them. If you want to keep them, it could automatically commit everything in spell and otherwise reset everything in there. So you usually wont be bothered by that script unless you actually do use the spellchecker.
The only drawback would be that you couldn't both make persistent and volatile additions to the dictionary in one session.
I have this dataset in a csv file
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504, 0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644, 0.00078635, 0.000730052, 0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669, 0.00230171, 0.00217917
As you can see, the numbers are formatted differently and misaligned. Is there a way in vim to quickly align the columns properly, so that the result is this
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504,0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644,0.00078635, 0.000730052,0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669,0.00230171, 0.00217917
That would be great to copy and paste sections with ctrl-v. Any hints?
If you're on some kind of UNIX (Linux, etc), you can cheat and filter it through the column(1) command.
:%!column -t
The above will parse on delimiters inside string literals which is wrong, so you will likely need pre-processing steps and specifying the delimiter for this file for example:
%!sed 's/","/\&/' | column -t -s '&'
Sometimes we want to align just two columns. In that case, we don't need any plugins and can use pure Vim functionality like this:
Choose a separator. In OP's post this is a comma, in my example this is =.
Add spaces before/after it. I use s/=/= ...spaces... / in visual selection for this.
Locate to the longest word and place cursor after it.
Remove all the extra whitespace using dw and vertical movement.
Example of this technique demonstrated below:
I don't find myself needing to align things often enough to install another plugin, so this was my preferred way of accomplishing it - especially that it doesn't require much thinking.
As sunny256 suggested, the column command is a great way of doing this on Unix/Linux machines, but if you want to do it in pure Vim (so that it can be used in Windows as well), the easiest way is to install the Align plugin and then do:
:%Align ,
:%s/\(\s\+\),\s/,\1/g
The first line aligns the entries on the commas and the second moves the comma so that it's flush with the preceding value. You may be able to use AlignCtrl to define a custom mapping that does the whole lot in one go, but I can never remember how to use it...
Edit
If you don't mind two spaces between entries and you want to do this in one command, you can also do:
:%Align ,\zs
This is a great answer using vim macros: https://stackoverflow.com/a/8363786/59384 - basically, you start recording a macro, format the first column, stop recording then repeat the macro for all remaining lines.
Copy/pasted from that answer:
qa0f:w100i <Esc>19|dwjq4#a
Note the single space after the 100i, and the <Esc> means "press escape"--don't type "<Esc>" literally.
Translation:
qa -- record macro in hotkey a
0 -- go to beginning of line
f: -- go to first : symbol
w -- go to next non-space character after the symbol
100i <Esc> -- insert 100 spaces
19| -- go to 19th column (value 19 figured out manually)
dw -- delete spaces until : symbol
j -- go to next line
q -- stop recording macro
4#a -- run the macro 4 times (for the remaining 4 lines)
We now also have the fabulous EasyAlign plugin, written by junegunn.
Demonstration GIF from its README:
Also, Tabularize is quite good http://vimcasts.org/episodes/aligning-text-with-tabular-vim/
You could use the csv.vim plugin.
:%ArrangeColumn
However, this will not do exactly what you have asked: it will right adjust the contents of cells, whereas you have your values aligned by the decimal point or by the first digit.
The plugin has many other useful commands for working with CSV files.
also if you have very long columns it can be handy to disable default wrapping
:set nowrap
:%!column -t
(note in debian you also have a further option for column -n which if you want to split multiple adjacent delimiters)
Here’s a pure Vim script answer, no plugins, no macros:
It might be most clear to start out with my problem’s solution as an example. I selected the lines of code I wanted to affect, then used the following command (recall that entering command mode from visual mode automatically prepends the “'<,'>”, so it acts on the visual range):
:'<,'>g``normal / "value<0d>D70|P`
Except I did NOT actually type “<0d>”. You can enter unprintable characters on the command line by pressing ctrl-v, then the key you want to type. “<0d>” is what is rendered on the command line after I typed ‘ctrl-v enter’. Here, it’s parsed by the “normal” command as the exit from “/” search mode. The cursor then jumps to “ value” in the current line.
Then we simply [D]elete the rest of the line, jump to column 70 (or whatever you need in your case), and [P]ut what we just deleted. This does mean we have to determine the width of the widest line, up to our search. If you haven’t put that information in your statusline, you can see the column of the cursor by entering the normal mode command ‘g ctrl-g’. Also note that jumping to a column that doesn’t exist requires the setting 'virtualedit'!
I left the search term for the :g(lobal) command empty, since we used a visual block and wanted to affect every line, but you can leave off using a visual selection (and the “'<,'>”) and put a search term there instead. Or combine a visual selection and a search term to narrow things more finely/easily.
Here’s something I learned recently: if you mess up on a complex command mode command, undo with ‘u’ (if it affected the buffer), then press “q:” to enter a special command history buffer that acts much like a conventional buffer. Edit any line and press enter, and the changed command is entered as a new command. Indispensable if you don’t want to have to stress over formulating everything perfectly the first time.
I just wrote tablign for this purpose. Install with
pip3 install tablign --user
Then simply mark the table in vim and do
:'<,'>:!tablign
Pretty old question, but I've recently availed myself of an excellent vim plugin that enables table formatting either on the fly or after-the-fact (as your use case requires):
https://github.com/dhruvasagar/vim-table-mode
I have this in my .vimrc.
command! CSV set nowrap | %s/,/,|/g | %!column -n -t -s "|"
This aligns the columns while keeping the comma, which may be needed later for correct reading. For example, with Python Pandas read_csv(..., skipinitialspace=True), thanks Pandas guys for this smart option, otherwise in vim %s/,\s\+/,/g. It may be easier if your column has the option --output-separator I guess, my doesn't and I'm not sure why (my man page for column says 2004, on ubuntu 18.04, not sure ubuntu will get a new version). Anyway, this works for me, and comment if you have any suggestions.
I made a cli tool written in Perl.
You can find it here: https://github.com/bas080/colcise