Hello I am a beginner user and was wondering if it was possible to remap <ctrl> . in insert mode to make |> appear?
I have tried the following example but it hasn't worked.
imap <C-.> |>
Due to the way that the keyboard input is handled internally, this unfortunately isn't generally possible today, even in GVIM. Some key combinations, like Ctrl + non-alphabetic cannot be mapped, and Ctrl + letter vs. Ctrl + Shift + letter cannot be distinguished. (Unless your terminal sends a distinct termcap code for it, which most don't.) In insert or command-line mode, try typing the key combination. If nothing happens / is inserted, you cannot use that key combination. This also applies to <Tab> / <C-I>, <CR> / <C-M> / <Esc> / <C-[> etc. (Only exception is <BS> / <C-H>.) This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim release.
Related
In Vim (or in a terminal?), control characters and their caret notation cannot be distinguished, like Enter vs. C-M. However, there is an only exception; BS vs. C-H.
Why are they only privileged?
For example, if you map Enter to NOP, also C-M will be mapped. Other many control characters have the same behavior. On the other hand, BS and C-H can be mapped to different keys respectively.
:map <Enter> <NOP> // also <C-M> will be mapped
:map <BS> <NOP> // only <BS> will be mapped, <C-H> won't
You can insert a backspace into a file by pressing controlV before the backspace. In that case, vim (and most editors) will display it as ^H. But normally backspace is treated as a command (telling vim to do something, depending on the mode).
When moving the cursor in a file containing control characters, you can readily distinguish between a control character versus caret next to another character: as you move the cursor left/right, vim will move two columns for the control character, but one column for each of the caret and other character.
I don't know all the nitty-gritty details, but basically (as I understand it) Vim uses an API to obtain the pressed keys that cannot distinguish between those different keys. For graphical applications like GVIM, all keys could be distinguished without problems; it's just a matter of switching to a more powerful (and GUI-only) API. For terminals, not all can actually distinguish between those keys (with <BS> / <C-H> the only exception). Many modern once can, though, it it again becomes a matter of switching to a more powerful API.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim release.
More details on the problem
Due to the way that the keyboard input is handled internally, it unfortunately isn't generally possible today to distinguish certain keys, even in GVIM. Some key combinations, like Ctrl + non-alphabetic cannot be mapped, and Ctrl + letter vs. Ctrl + Shift + letter cannot be distinguished. (Unless your terminal sends a distinct termcap code for it, which most don't.) In insert or command-line mode, try typing the key combination. If nothing happens / is inserted, you cannot use that key combination. This also applies to <Tab> / <C-I>, <CR> / <C-M> / <Esc> / <C-[> etc. (Only exception is <BS> / <C-H>.) This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
This is because the XK_BackSpace keysym generally causes terminals to send ASCII DEL (0x7F), not ASCII BS (0x08, ^H). To balance things out, XK_Delete sends a sequence like \033[3~. Thus, unlike XK_Tab/^I, XK_BackSpace and ^H send completely different bytes.
Programs using the terminfo database can read the kbs and kdch1 capabilities to know what Backspace and Delete send, respectively. You can see your terminal's value with tput:
$ tput kbs | sed -n l
\177$
\177 is octal for ASCII DEL (see ascii(7)).
Another method is to check the termios(4) structure, which controls the “cooked mode” used by e.g. cat to read input (unlike bash or zsh). This is what Vim does in get_tty_info (src/os_unix.c), uh, after it checks termcap(5), compares backspace and delete, and, uh, maybe calls :fixdel? But you get the idea.
I am working with Cygwin/Mintty/Vim.
With <C-v> I see that <C-S-c> is encoded <83>. This mean vim can read it and I can map it using the map command.
Unfortunately if I try:
:inoremap <C-S-c> foobar
it doesn't work...
How can I make it work and why vim refuses to map Unicode keystokes?
Same question for <C-S-F1>. If I execute this command:
:inoremap <C-S-F1> foobar
I will get something like this:
[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~[20;5~
Where F1 is [1;5P and F9 is [20;5~
Vim apparently does not support exotic key combinations involving Control (<C-…>). That includes F1 – though your other attempted mapping ShiftC is supported (and is equivalent to Control with just C). From a post by Tony Mechelynck on a forum thread “Mapping ctrl-; (ctrl semicolon)”:
The only printable keys which can reliably be used with Ctrl, with
predictable results, in cooked mode on any OS, are those defined by
ASCII, and that means the following AND NO OTHERS:
ASCII characters 0x40 to 0x5F (i.e. uppercase A to Z, plus the six
nonalpha characters at-sign, left-bracket, slash, right-bracket,
[caret] and underscore), where Ctrl subtracts 0x40, thus mapping them
to 0x00 to 0x1F respectively. This explains why Ctrl-[ means Esc, Ctrl-I
means Tab, Ctrl-M means Enter, etc.
Lowercase letters, whose Ctrl counterpart is the same as for the
corresponding uppercase (thus Ctrl+letter and Ctrl+Shift+letter are
always the same for a given letter)
In addition, Ctrl-? is mapped to 0x7F (DEL).
Vim may or may not see other Ctrl-combinations, but that depends on the
terminal, and in most cases it won't see them, or confuse them with
something else such as the same key without Ctrl.
As for your <C-S-c> mapping, I’m not totally sure why you can see <C-S-c> with <C-v> but you can’t map it. When I test in MacVim (a GUI), I get the character ^C when I try <C-v><C-S-c>, and :inoremap <C-S-c> foobar works. When I test in OS X’s Terminal, the Terminal swallows the keystroke and beeps, with both <C-v> and :inoremap. In both cases, <C-v>’s behavior is consistent with :inoremap’s, so I don’t know why you are seeing the discrepancy.
Due to the way that the keyboard input is handled internally, this unfortunately isn't generally possible today, even in GVIM. Some key combinations, like Ctrl + non-alphabetic cannot be mapped, and Ctrl + letter vs. Ctrl + Shift + letter cannot be distinguished. (Unless your terminal sends a distinct termcap code for it, which most don't.) In insert or command-line mode, try typing the key combination. If nothing happens / is inserted, you cannot use that key combination. This also applies to <Tab> / <C-I>, <CR> / <C-M> / <Esc> / <C-[> etc. (Only exception is <BS> / <C-H>.) This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim 8 major release.
In vim, Ctrl+[ acts like Esc by default. However, I would like to rebind Ctrl+[ to perform a custom action. (Specifically, to Ctrl-t because I find it more natural for [ and ] to have complementary actions for ctags.)
However, when I execute the command:
:nnoremap <C-[> <C-t>
then my arrow key navigation get messed up. I'm not sure what happens, but clearly that's not the ideal way to do it.
I've tried to unbind Ctrl+[ but vim reports that it wasn't bound, and I've tried some tricks like first binding Ctrl+[ to itself and then unbinding. Always the same result.
Side note: Interestingly, when I add it to my .vimrc (as the last command) it's even worse. Something nondeterministic happens and vim opens randomly in one of these 3 states:
The bottom status line says "E73: tag stack empty", implying it received a Ctrl+t-esque command, however the if I hit a nav key like j, it deletes the current and bottom line and then puts me into insert mode. (Happens ~70% of the time.)
Sometimes it's in replace mode. (Happens ~15% of the time.)
Sometimes it's in normal mode. (Happens ~15% of the time.)
How can I properly remap Ctrl+[ to a different function in .vimrc?
You can't rebind Ctrl[. Pressing the Escape key in a terminal sends Ctrl[, just like pressing the Tab key sends CtrlI. There's no separate Esc code.
Vim is probably acting crazily when you try this because basically every ANSI key sequence starts with Ctrl[, so your rebinding is firing on all terminal input, and whatever else is in the key sequence looks like more commands to vim.
Due to the way that the keyboard input is handled internally, this unfortunately isn't generally possible today, even in GVIM. Some key combinations, like Ctrl + non-alphabetic cannot be mapped, and Ctrl + letter vs. Ctrl + Shift + letter cannot be distinguished. (Unless your terminal sends a distinct termcap code for it, which most don't.) In insert or command-line mode, try typing the key combination. If nothing happens / is inserted, you cannot use that key combination. This also applies to <Tab> / <C-I>, <CR> / <C-M> / <Esc> / <C-[> etc. (Only exception is <BS> / <C-H>.) This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim 8 major release.
I am encountering some strange behavior with a keymap in vim that uses the ctrl key. I would guess that this has a simple cause and solution, but I just can't see it.
During the editing of restructuredtext, I find myself typing things like
:math:`x`
often (this :math: role will cause whatever is inside the ticks to be typeset as math in e.g. the latex output).
I want to map a key like m to enter :math:`` into the text and position the cursor inside the ticks.
I have done this
map m i:math:``ha
and that seems to work fine.
However, I would like to be able to use this map in insert mode. For that, I thought that using ctrl+m would be best. I've done
imap <c-m> :math:``ha
Although that correctly inputs :math:`` and positions the cursor inside the ticks when I do ctrl+m, the trouble is that after this point, every time I press enter in insert mode, it runs the same command as if I typed ctrl+m. In other words, enter in insert mode now seems to be mapped to
:math:``ha
as well.
It seems like it is definitely something to do with using the ctrl key. If I bind e.g. the F5 key as follows
imap <F5> :math:``ha
everything is fine.
I can use the e.g. F5 key and save myself any further bother, but I would like to know what is going on for future reference.
Is there something basic about the use of the ctrl key in a key map that I am missing?
thank you,
You have to use a different control combination for your mapping, e.g. <C-g>.
Due to the way that the keyboard input is handled internally, this unfortunately isn't generally possible today without these side effects, even in GVIM. Some key combinations, like Ctrl + non-alphabetic cannot be mapped, and Ctrl + letter vs. Ctrl + Shift + letter cannot be distinguished. (Unless your terminal sends a distinct termcap code for it, which most don't.) This also applies to <Tab> / <C-I>, <CR> / <C-M> / <Esc> / <C-[> etc. (Only exception is <BS> / <C-H>.) This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim 8 major release.
if you do a
:h keycodes
you will see:
notation meaning equivalent decimal value(s) ~
-----------------------------------------------------------------------
....
<CR> carriage return CTRL-M 13 *carriage-return*
<Return> same as <CR> *<Return>*
<Enter> same as <CR> *<Enter>*
so it tells, <c-m> is same as <Enter> (same keycode 13)
you could test in your shell too, for example, type ls and then <c-m> instead of <Enter>
I am trying to remap Ctrl + [ to :pop. I have rebound my Ctrl + t to :tabe and Ctrl + Shift + T to new shell tab. I came up with:
nnoremap <C-[> :pop
but when I do this I get :pop on almost every keystroke, and even mouse clicks.
The idea being that this keymapping tacks me back up the chain of the tags list. Opposite of Ctrl + ]
In a terminal, <Esc> is the same as <C-[>; both are represented by the same keycode.
Due to the way that the keyboard input is handled internally, differentiating this as well as many other key combinations (like Ctrl+Letter vs. Ctrl+Shift+Letter) unfortunately isn't possible today, even in GVIM. This is a known pain point, and the subject of various discussions on vim_dev and the #vim IRC channel.
Some people (foremost Paul LeoNerd Evans) want to fix that (even for console Vim in terminals that support this), and have floated various proposals, cp. http://groups.google.com/group/vim_dev/browse_thread/thread/626e83fa4588b32a/bfbcb22f37a8a1f8
But as of today, no patches or volunteers have yet come forward, though many have expressed a desire to have this in a future Vim 8 major release.