I need to format many SD cards in WinCE. I am not familiar with CE, currently I'm using the CE storage manager to format them but it takes a long time and doing something many times leads to mistakes.
Is there any way to format a SD card via batch file? And what are the options? I need Part00 -> ExFAT & Part01 -> ExFAT with TFAT
Thanks in advance.
Basti
Related
I have an idea that I have been working on, but there are some technical details that I would love to understand before I proceed.
From what I understand, Linux communicates with the underlying hardware through the /dev/. I was messing around with my video cam input to zoom and I found someone explaining that I need to create a virtual device and mount it to the output of another program called v4loop.
My questions are
1- How does Zoom detect the webcams available for input. My /dev directory has 2 "files" called video (/dev/video0 and /dev/video1), yet zoom only detects one webcam. Is the webcam communication done through this video file or not? If yes, why does simply creating one doesn't affect Zoom input choices. If not, how does zoom detect the input and read the webcam feed?
2- can I create a virtual device and write a kernel module for it that feeds the input from a local file. I have written a lot of kernel modules, and I know they have a read, write, release methods. I want to parse the video whenever a read request from zoom is issued. How should the video be encoded? Is it an mp4 or a raw format or something else? How fast should I be sending input (in terms of kilobytes). I think it is a function of my webcam recording specs. If it is 1920x1080, and each pixel is 3 bytes (RGB), and it is recording at 20 fps, I can simply calculate how many bytes are generated per second, but how does Zoom expect the input to be Fed into it. Assuming that it is sending the strean in real time, then it should be reading input every few milliseconds. How do I get access to such information?
Thank you in advance. This is a learning experiment, I am just trying to do something fun that I am motivated to do, while learning more about Linux-hardware communication. I am still a beginner, so please go easy on me.
Apparently, there are two types of /dev/video* files. One for the metadata and the other is for the actual stream from the webcam. Creating a virtual device of the same type as the stream in the /dev directory did result in Zoom recognizing it as an independent webcam, even without creating its metadata file. I did finally achieve what I wanted, but I used OBS Studio virtual camera feature that was added after update 26.0.1, and it is working perfectly so far.
I currently am collecting data from a large quantity of participants, all of whom have a badge that is scanned at the point of entry; logging ID, date/time etc... This is all tracked on a laptop running Windows 10 / Excel.
The issue here is that the laptop currently must only be devoted to this task. The ideal scenario would be that the card reader (usb peripheral) would input data into the spreadsheet as a background process.
Is there a way to route a USB peripheral to a sole application, even if that application is not in the foreground?
Cheers, and thank you!
I'm sorting out how to achieve the following, I want to use smart or memory cards in a project. The cards should be read by standardized card readers (for example ACR38). When they are read by the computer ( command line or by a software (processing or p5js or similar), there should be a popup a window which shows the contents of the card being a picture and a text. Bit similar when I use my regular ID to be read by my E-idsoftware.
For the moment the card I have is this one SLE4428 (at the bottom instructions from the vendor)
These have no data on it yet and are bought blank
=> datasheet
The software I found but don't know if it's suited for my project and how to specifically use it is the following.
Opensource tools that I found when searching for SC cards software (no id how to use them.)
https://linux.die.net/man/1/opensc-tool
https://linux.die.net/man/1/opensc-explorer
I looked at my smartcard reader and found that http://www.acr38u.com/
is a platform but has to be payed for and I'm unable to found sofware for this on linux or apple.
Again here I found a datasheet with hex code to connect to the card, but still not how to physically connect to the cards.
This site shows many points of a working shell but I can't find the installer for it. opendsc
Then lastly this is the most promising and I already contacted the maker of it. But installation gets stuck in the make process (which I've already searched for and is not solution yet, being at it for a week now so therefore this post, maybe the community can help with an alternative look)
This is the explanation from the vendor side (Aliexpress) which is kind of specific. Though I don't know where to input these hex codes to write or read from the card. (there is a software but it's windows (If there is somebody that can say, that the way to solve the core question of my project then I'll try to get a windows pc to work on it via that way))
ISO7816 SLE 4442 Chip PVC Contact Smart Card (0.8* 85.5 * 54mm)
If you need write the 4442 cards,you should buy the contact smart reader writer!! 4442 cards not support 13.56mhz rfid writer!!!
NOTE:There is NO magnetic strip behind the card.
Graphics Quality Cards For All Photo ID Card Printers Including
DataCard, Zebra, Fargo, Evolis, Magicard, NBS & etc.
(These Cards Will Not Work In Inkjet Printers)
If you need 100pcs 4442 cards,pls check the links below:
[https://www.aliexpress.com/store/product/100-pcs-lot-ISO7816-RFID-Contact-SLE-4442-Chip-PVC-Smart-Card/516120_32425491077.html?spm=2114.12010608.0.0.R0bzFx][1]
Features:
Standard:ISO7816
Product Chip:SLE4442
Color:White
Dimension: L 85.5 x W 54 x H 0.80±0.04mm
256 × 8-bit EEPROM organization
32 × 1-bit organization of protection memory
erase cycles more than 100,000 times
Data retention for minimum of ten years
Default passwords: FFFFFF
3 bytes for error counter and card secret code area
1,Write protected area (first 32 bytes) of each byte can be individually write protected, After write,the data can't be changed.
2, Before checking the password, all the data can be read, if necessary,you could encryption data.
3, After confirm password is correct,the data could be write or modify.
4, The 3 bytes of user passwords, after confirm is correct,it could be change.
5, The password error counter, the initial value of 3, check the error code 1, then subtract 1, if the counter value is 0, the card is automatically locked, the data just read out, no longer change can no longer be password verification; if zero, the one time password verification is correct, restore to the initial value.
6, The byte address 0-5,6-7 factory prior written by the manufacturers can not be changed.
The specifics for this question lies in either
A: How can I achieve a working environment on linux or mac (first) to read and write data on an sc card (the one I have or !B: a working alternative)
C: Create a viewer program or webapp, etc.. to view or route the data to when the SC card is being read. (This would be a valid question, If i where to chose a Windows based existing program, I think)
Because this is not code specific, but I still want people that have the same questions to be able to see this page to show them pletora of scripts and ways to approach this or similar SC project.
This guy knows a lot about OpenSC!
I have Orange Pi Plus 2e.
I want to install Fedora 24 on it.
So from
https://arm.fedoraproject.org/
I download "Fedora minimal"
https://download.fed...-1.2-sda.raw.xz
Next I unpack it:
xz -d Fedora-Minimal-armhfp-24-1.2-sda.raw.xz
and write to micro sdhc card:
dd if=Fedora-Minimal-armhfp-24-1.2-sda.raw of=/dev/my_micro_sdhc_card
(I write it to card, not to partition on card).
I have new partitions on this card like:
boot
/
swap
I put my card to Orange and turn it on, but it does not load Fedora.
Does anyone know how to do it, has any experience, can share some knowledge, links with me ?
Fedora offers a script to write the disk image as well as board specific U-Boot and dtb. You can find more information here - https://fedoraproject.org/wiki/Architectures/ARM/F24/Installation#Fedora_Arm_Installer . Be sure to use the latest version in updates-testing (fedora-arm-installer-1.99.12-1.fc24).
We would appreciate feedback or any issues you encounter, you can visit us in #fedora-arm on Freenode or send to our mailing list - https://admin.fedoraproject.org/mailman/listinfo/arm
Paul
I am bit stuck, how can I make my arduino record into .wav files?
The arduino is connected with a microphone, and am using the Arduino ADC.
Any ideas? Will I be able to play them back using my pc?
many question cross my head
1- Is this possible using an arduino Uno
2- Is this possile using just a microphone connected to the Arduino ADC
3- if yes how can i get the wav format.
The idea gonna be like this
Ardiuno microphone-->Uno ADC -->arduino (library making wav sound)--> Storing data to a an SD card connected via SPI or maybe (connecting a Raspberry as a storage device)
also another question:
4- Do I need an amplifier due to the act that analog output from the microphone is very weak so the ADC couldn't detect the variation
In another log i had seen that i should connect the microphone to a level shifter.And that cause of the analog output is AC so i have to make the negative wave as 0 (for 10 it ADC)
the zero point as 512 and the positive as 1024 (10 bit ADC).(really i'm not sure about this part)
doing some research i got this library "https://github.com/TMRh20/TMRpcm/wiki/Advanced-Features#recording-audio" which is supposed to do the job, I mean making some wav file from the analog input.
So any help would be appreciated
Thx in advance,
Salah Laaroussi
Yes, although a bit complex it is very possible to do this via an uno.
The biggest hurdles to overcome is the limited amount of RAM and the clock speed. You will have to setup twin buffers to handle writing to the SD card. Make sure the card has a high enough write speed or the entire program will come to a screeching halt as you will run out of memory.
apc mag has a great article detailing out the circuit and code.
http://apcmag.com/arduino-projects-digital-audio-recorder.htm/
There are many things you haven't prepared yet:
output of microphone (assuming you know about electronics: still requires a biasing circuit e.g. a resistor + capacitor).
the output of the microphone is still very weak (in the magnitude of mV), which Arduino is incapable of capturing so you need a pre-amplifier
the design of the pre-amplifier will also include DC offset which makes the output of the microphone all above 0VDC which is in the range of the Arduino ADC otherwise the arduino will capture only those above 0VDC.