var upsertDocument = function (db, table,kv,data) {
db.collection(table).update(
{ kv },
{ $set: data },
{ upsert: true }
)
}
Can I have a code like this? pass kv(key,value) into a function as the parameter
Thanks.
upsertDocument(db,"MaxBlockSync",{idx:0},{blockNumber: 66});
my input is like this. Thanks!
The basic idea is correct. You can consider using mongoose so it will look like:
`var upsertDocument = function (table, kv, data) {
table.findOneAndUpdate(
{_id: kv._id},
{
$set: {
name: data.name
}
},
{upsert: true}
)
}`
Related
I'm trying to use the $set, $addToSet and $inc at the same time for my report of sales and
tbh I'm not even sure if I did the right approach since it's not working.
once I send the request, the console gives me the error 404 but when I check the req.body the data was correct. so I was wondering if the problem is my query on mongoose because this was the first time I use multiple operations on mongoose query
export const report_of_sales = async (req, res) => {
const { id } = req.params;
console.log(req.body);
try {
if (!mongoose.Types.ObjectId.isValid(id)) return res.status(404).json({ message: 'Invalid ID' });
let i;
for (i = 0; i < req.body.sales_report.length; i++) {
await OwnerModels.findByIdAndUpdate(id, {
$inc: {
total_clients: req.body.total_clients,
total_product_sold: req.body.sales_report[i].qty,
sales_revenue: req.body.sales_report[i].amount
},
$set: {
"months.$[s].month_digit": req.body.months[i].month_digit,
"months.$[s].targetsales": req.body.months[i].targetsales,
"months.$[s].sales": req.body.months[i].sales,
},
$addToSet: {
sales_report: {
$each: [{
identifier: req.body.sales_report[i].identifier,
product_name: req.body.sales_report[i].product_name,
generic_name: req.body.sales_report[i].generic_name,
description: req.body.sales_report[i].description,
qty: req.body.sales_report[i].qty,
amount: req.body.sales_report[i].amount,
profit: req.body.sales_report[i].profit
}]
}
}
}, {
arrayFilters: [
{
"s.month_digit": req.body.months[i].month_digit
}
],
returnDocument: 'after',
safe: true,
}, { new: true, upsert: true })
}
} catch (error) {
res.status(404).json(error);
}
}
Well, you are looking at the body, but you are actually using query parameter named id. This is probably undefined, which leads to ObjectId.isValid(id) returning false.
You should decide on whether to pass this data as a query param or in the request body and adjust your code accordingly.
CustomItemCollection.find({name: urlPath}, function(err, data){
if(err){
console.log(err);
}
else{
let returnedData = data[0].item;
for(var i = 0; i < returnedData.length; i++){
if(returnedData[i]._id === checkboxButton){
//delete this object nested inside the array
}
}
}
})
Im trying to delete an element inside an array. I tried following some other posts on here but they didn't work. Can someone tell me how to do this? Here's the schema if that'll help:
const CustomItemSchema = {
name: {
type: String,
required: 1,
unique: 1
},
item: [{
myItems: String
}]
}
i wanna delete one of the "myItems" created using its id. I have gotten its id but i don't know how to delete it.
Thanks for your help!
If I've understood correctly you only need to use $pull like this:
CustomItemCollection.updateOne(
{
"name": urlPath
},
{
"$pull": {
"item": {
"_id": checkboxButton
}
}
})
Example here
Note that I've used updateOne but you can use other query as findOneAndUpdate or updateMany if you need.
How can I update a field with new properties that is initially set to be an empty object?
For example, I have the following schema:
import mongoose from 'mongoose';
var RunSchema = mongoose.Schema(
{
runId: { type: String },
reports: {
cookieSummary: {
name: String,
path: String
}
}
}
)
export default mongoose.model('Run', RunSchema);
And I'm trying to update the following document:
{
"_id": {
"$oid": "5a0565c2537e0b5d9d08ee6b"
},
"__v": 0,
"reports": {},
"runId": "8r4LNN3fRqd3qNgdW"
}
But when I run this code, it returns undefined:
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {'reports.cookieSummary': { 'name': 'test' }},
}, (err, doc) => { console.log(doc) })
The object notation works after adding type to fields, like this: name: { type: String }
Try to use dot notation, as you're setting just one field:
Run.findOneAndUpdate(
{ runId: '8r4LNN3fRqd3qNgdW' },
{ $set: {'reports.cookieSummary.name': 'test' } },
(err, doc) => { console.log(doc) })
According to the docs, the command you're using should work but you write it wrongly. Try like this:
Run.findOneAndUpdate(
{ runId: '8r4LNN3fRqd3qNgdW' },
{ $set: { 'reports.cookieSummary': {'name': 'test'} } },
(err, doc) => { console.log(doc) })
if it does not work, maybe mongo expect that the object matches its schema when you use the command like this. But I don't think so.
Let me know.
Your query for update a document is good only the mistake is at the end of curly braces of $set. You entered un-necessary comma at the end that is actually creating problem in this case. So I suggest you to remove it and run this :
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {'reports.cookieSummary': { 'name': 'test' }}
}, (err, doc) => { console.log(doc) });
and then see. Rest of your query is fine.
Hope It will work for you.
Thanks.
Try using below code, it will update the document and return the updated document.
var Q = require('q');
var deferred = Q.defer();
Run.findOneAndUpdate({ runId: '8r4LNN3fRqd3qNgdW' }, { $set: { 'reports.cookieSummary.name': 'test' } }, { new: true },
(err, doc) => {
console.log(doc);
deferred.resolve(doc);
});
return deferred.promise;
I made a small change. Test this solution.
Run.findOneAndUpdate({runId: '8r4LNN3fRqd3qNgdW'},
{
$set: {"reports": {'cookieSummary':{'name': 'test'}}},
}, (err, doc) => { console.log(doc) })
I need to send all urls including last updated values from mongodb.
but i only get previous updated values.Can any body tell the me solution .
new_add_schema.findOneAndUpdate(
{
user_id: req.body.user_id
},
{
$push:
{
filename:
{
url:img_filename
}
}
},
function(err, doc) {
console.log(doc)
});
In mongoose you can pass options as the third argument for this method. If you pass new: true in options then Mongo will return the updated document. It is false by default.
So query like this -
new_add_schema.findOneAndUpdate(
{
user_id: req.body.user_id
},
{
$push:
{
filename:
{
url:img_filename
}
}
},
{new: true}, // notice this options argument
function(err, doc) {
console.log(doc)
});
You can see the documentation here.
I'm trying to $push and $set at the same time, $push is working just fine, when it comes to $set, it generates this error:
MongoError: The positional operator did not find the match needed from
the query. Unexpanded update: files.$.name
Here's the code
Course.update(
{
_id: req.body.courseId,
'files.fileUrl': { $ne: url }
},{
$push: { files: { fileUrl: url } },
$set: {'files.$.name': file.name},
}, function(err, count) {
if (err) return next(err);
console.log("Successfully saved")
});
and the ORM model, I'm using mongoose
var CourseSchema = new Schema({
files: [{
fileUrl: String,
name: { type: String, default: 'File name'}
}]
});
Any help would be appreciated. Thanks.
As the error states looks like the query used is returning no documents or returning documents having no files[].
Another reason for which it might be throwing error is that you're trying to $push & $set in the same field files and probably running into an issue similar to https://jira.mongodb.org/browse/SERVER-1050
IMHO, there is no good reason to use the same field in $push & $set, instead you can simply change
$push: { files: { fileUrl: url } },
$set: {'files.$.name': file.name},
to
$push: { files: { fileUrl: url, name: file.name } },
I have written similar kind of query for my project
Hope u could relative this to your scenario
exports.candidateRating = function(req, res) {
console.log(req.query);
console.log(req.body.RoundWiseRatings);
Profiles.update({
"name": req.query.name
}, {
$set: {
"ratings": req.body.ratings,
},
$push: {
"RoundWiseRatings": req.body.RoundWiseRatings
}
}, {
multi: true
}, function(error, profiles) {
if (error) {
}
return Profiles.find({
name: req.query.name
}, function(err, profiless) {
console.log(profiless);
if (err) {
return handleError(res, err);
}
return res.status(200).json(fnStruncturedData(profiless[0].RoundWiseRatings));
});
});};
And this worked for me :)