I have been having problems with my node red installation and the install of additional node packages...I am trying to install the node-red-contrib-i2c package on Raspberry PI http://flows.nodered.org/node/node-red-contrib-i2c ...this is my console output:
pi#raspberrypi:~ $ npm install node-red-contrib-i2c
more console output...then error:
make: Leaving directory '/home/pi/node_modules/node-red-contrib-i2c/node_modules/i2c/build'
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 4.4.50-v7+
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/pi/node_modules/node-red-contrib-i2c/node_modules/i2c
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian
npm ERR! i2c#0.2.3 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the i2c#0.2.3 install script.
npm ERR! This is most likely a problem with the i2c package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls i2c
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 4.4.50-v7+
npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install" "node-red-contrib-i2c"
npm ERR! cwd /home/pi
npm ERR! node -v v0.10.29
npm ERR! npm -v 1.4.21
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/pi/npm-debug.log
npm ERR! not ok code 0
Something similar happens with several other packages that I have also tried to install including the MCP3008 ADC node package.
Delete your $HOME/.node-gyp.
It should fix your problem
Ok so I ended up solving the problem. What was happening is that the nodejs version that comes pre-installed with the PI is an older version and needs to be upgraded in order to install this particular node for node red so I used:
curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
sudo apt-get install nodejs
This upgrades the nodejs version to version 6 from 0.10.29. 0.10.29 is in the standard Raspberry PI Jessie installation at the time of this writing. Then the installation of the node-red I2C works just fine.
Related
I'm trying to set server with node.js and mariaDB on Ubuntu at EC2 of AWS.
here is the versions what I installed..
Ubuntu 14.04.3 LTS
MariaDB 10.1.14
NodeJS 4.4.7
now I want to connect with node.js and mariaDB, so I tried to install mariasql
with this command..
$sudo npm install mariasql
but this errors occurred..
========================================================================
gyp ERR! build error
gyp ERR! stack Error: not found: make
gyp ERR! stack at getNotFoundError (/usr/lib/node_modules/npm/node_modules/which/which.js:14:12)
gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:69:19)
gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:81:29)
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:90:16
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5 gyp ERR! stack at FSReqWrap.oncomplete (fs.js:82:15)
gyp ERR! System Linux 3.13.0-74-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/ubuntu/node_modules/mariasql
gyp ERR! node -v v4.4.7
gyp ERR! node-gyp -v v3.3.1
gyp ERR! not ok
npm ERR! Linux 3.13.0-74-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "mariasql"
npm ERR! node v4.4.7
npm ERR! npm v2.15.8
npm ERR! code ELIFECYCLE
npm ERR! mariasql#0.2.6 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the mariasql#0.2.6 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the mariasql package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with: npm ERR! npm bugs mariasql
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!
npm ERR! npm owner ls mariasql
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/ubuntu/npm-debug.log
========================================================================
already installed node-gyp.
I tried old version of node, it was 0.10.x but it didn't work as well.
what did I wrong with it?
Do you have build-essential installed?
sudo apt-get install build-essential
Also, did you install node-gyp as global?
sudo npm install -g node-gyp
This is important, please see there is -g flag
I'm trying to reprogram a dash button to send an SMS to a phone. The task I am trying to attempt is located here: https://github.com/sanzgiri/dash-sms. Below is a copy of the error message I've been getting. Any insight is much appreciated. I'm using Ubuntu version 16 in a virtual machine.
rebecca#rebecca-VirtualBox:~$ sudo npm install node-dash-button
> socketwatcher#0.3.0 install /home/rebecca/node_modules/socketwatcher
> node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node- gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Linux 4.4.0-21-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/rebecca/node_modules/socketwatcher
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Linux 4.4.0-21-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "node-dash-button"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! socketwatcher#0.3.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the socketwatcher#0.3.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the socketwatcher package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs socketwatcher
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls socketwatcher
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/rebecca/npm-debug.log
I believe the code is confugure to work with "node" instead of "nodejs".
You can setup a simlink or just run this command. It solved the issue for me.
sudo apt install nodejs-legacy
Had the same issue and nothing would work. Finally had to go to node 0.10.26 on the pi.
Used NVM instead of direct node install.
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.1/install.sh | bash
nvm install 0.10.26
I am trying to install a printer module for node on a lubuntu system, but making the npm installation, I get this:
gyp: Call to 'cups-config --libs' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node-gyp/lib/configure.js:344:16)
gyp ERR! stack at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:797:12)
gyp ERR! System Linux 3.16.0-23-generic
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/puesto1/app/node_modules/printer
gyp ERR! node -v v0.10.25
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian
npm ERR! printer#0.1.1 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the printer#0.1.1 install script.
npm ERR! This is most likely a problem with the printer package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls printer
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 3.16.0-23-generic
npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! cwd /home/puesto1/app
npm ERR! node -v v0.10.25
npm ERR! npm -v 1.4.21
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/puesto1/app/npm-debug.log
npm ERR! not ok code 0
It is a recently installed lubuntu, and I don´t know what to do. Any suggestion to solve the problem?? Any other module to print??
Thank you.
I think node-gyp is not up to date in your system and also cups-config is not installed, try to re-install node-gyp using apt-get with this command : sudo apt-get install node-gyp and install cups-config using command : sudo apt-get install libcups2-dev
I recently installed node and npm to try it out but during an installation of a module it stuck on the ctags package which it depended on. Trying to only install ctags resulted in a weird error which I could not find a solution for.
henje#mymachine:~/test/node-ctags$ npm install
npm http GET https://registry.npmjs.org/grunt
npm http GET https://registry.npmjs.org/nan/0.8.0
npm http GET https://registry.npmjs.org/bindings
npm http GET https://registry.npmjs.org/grunt-contrib-coffee
npm http GET https://registry.npmjs.org/event-stream
npm http GET https://registry.npmjs.org/grunt-shell
npm http GET https://registry.npmjs.org/node-gyp
[...]
> ctags#0.11.0 install /home/henje/test/node-ctags
> node-gyp rebuild
Usage: gyp_main.py [options ...] [build_file ...]
gyp_main.py: error: no such option: --no-parallel
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 2
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:340:16)
gyp ERR! stack at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:797:12)
gyp ERR! System Linux 2.6.36.4-vs2.3.0.36.39-nc
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/henje/test/node-ctags
gyp ERR! node -v v0.10.26
gyp ERR! node-gyp -v v0.13.0
gyp ERR! not ok
npm ERR! ctags#0.11.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the ctags#0.11.0 install script.
npm ERR! This is most likely a problem with the ctags package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls ctags
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 2.6.36.4-vs2.3.0.36.39-nc
npm ERR! command "node" "/usr/local/bin/npm" "install"
npm ERR! cwd /home/henje/test/node-ctags
npm ERR! node -v v0.10.26
npm ERR! npm -v 1.4.6
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/henje/test/node-ctags/npm-debug.log
npm ERR! not ok code 0
I am not sure if this is a general issue or just. I tried npm install ctags as well as cloning from github. I also checked if I have a recent gcc, etc. for gyp and have no idea left. I appreciate any answers.
I have also faced this issue while trying to install pm2 module.
As a workaround, removing gyp solved this problem for me:
sudo apt-get remove gyp
Here is the issue itself listed in pm2 repository: https://github.com/Unitech/pm2/issues/434
I can't install any packages that requires node-gyp. The error message goes like this
$ npm install node-protobuf
info trying registry request attempt 1 at 22:43:57
http GET https://registry.npmjs.org/node-protobuf
http 200 https://registry.npmjs.org/node-protobuf
npm http GET https://registry.npmjs.org/node-protobuf/-/node-protobuf-1.0.8.tgz
npm http 200 https://registry.npmjs.org/node-protobuf/-/node-protobuf-1.0.8.tgz
> node-protobuf#1.0.8 install /home/whs/node_modules/node-protobuf
> node-gyp rebuild
gyp ERR! build error
gyp ERR! stack Error: not found: make
gyp ERR! stack at F (/usr/local/lib/node_modules/npm/node_modules/which/which.js:43:28)
gyp ERR! stack at E (/usr/local/lib/node_modules/npm/node_modules/which/which.js:46:29)
gyp ERR! stack at /usr/local/lib/node_modules/npm/node_modules/which/which.js:57:16
gyp ERR! stack at Object.oncomplete (fs.js:107:15)
gyp ERR! System Linux 2.6.32-5-amd64
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/whs/node_modules/node-protobuf
gyp ERR! node -v v0.10.22
gyp ERR! node-gyp -v v0.12.1
gyp ERR! not ok
npm ERR! node-protobuf#1.0.8 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the node-protobuf#1.0.8 install script.
npm ERR! This is most likely a problem with the node-protobuf package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls node-protobuf
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 2.6.32-5-amd64
npm ERR! command "node" "/usr/local/bin/npm" "install" "node-protobuf"
npm ERR! cwd /home/whs/
npm ERR! node -v v0.10.22
npm ERR! npm -v 1.3.15
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/whs/npm-debug.log
npm ERR! not ok code 0
I also tried the protobuf package and got the exact same result.
Most search result says that this error is from missing make but in my case I have make installed. The node installation is even built from source manually on the machine.
Additional info:
Path: /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
Make: GNU Make 3.81 installed in /usr/bin/make (from official Debian package)
Distro: Debian 6.0.8
Arch: amd64
Build-essential package: installed
Node: Manually built from source
Installation of non-gyp packages: work normally
I have found that I set 0754 permission on /usr/bin/make and a bug in which skip the file due to user's primary group is not the same as make's. I have filed a bug in node-which.