I just got a refurbished computer and after installing Ubuntu, computer refuses to boot and instead displays screen with message:
"Insert system disk in drive.
Press any key when ready...."
I tried reinstalling Linux twice (from a usb and from a cd) and the problem persists.
I have a Toshiba Portege R930 which originally had a Windows 7 and I installed Ubuntu 16.04.2
Any suggestions would be appreciated,
Thankyou xx
1) Try changing the boot order so the hard disk is first.
2) Make sure the BIOS supports GRUB signatures.
3) Make sure the ISO is correct for your machine (is it 32-bit like your machine?, etc.)
Related
I had installed ubuntu 18 in my acer aspire. Then i installed windows 10 in dual boot mode. After installing the windows i can not access the ubuntu. The grub loader is not shown.
And there is no way to access my ubuntu.
I even tried to change the path of bootloader to ubuntu in cmd.
But no success. Please help me out.
check this link: https://askubuntu.com/questions/602602/cant-access-ubuntu-after-creating-dual-boot
"YOUR COMPUTER BOOTS DIRECTLY TO WINDOWS
This is a common problem and if you do not get a GRUB menu , re-installing or repairing grub will NOT HELP
Every BIOS is different, it might look like one of the following pictures:
UEFI 1
UEFI 2
Notice the "UEFI Boot Option Priority" or "Boot Option Menu" . Usually Windows is the default and Ubuntu (or as in the second picture elementary OS) will be an option.
Once you select Ubuntu on the UEFI boot menu you will then get a grub menu. You should be able to boot either Ubuntu or Windows from the grub menu.
Another issue that could make the system boot directly to Windows (without even showing the GRUB menu) is if either Windows took hold of the boot manager or after installing Ubuntu, the EFI partition was not properly configured for Windows. To solve this, simply go to Windows and open a terminal, then type the following (Need Administrative Privileges):
bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi This will configure the Windows Boot Manager to take into consideration the GRUB Boot Manager. This could still happen even after running the Boot Repair from within Ubuntu. So making sure that Windows reads the Ubuntu EFI partition will solve it."
I try to build a reproducible automated build environment based on Debian 8.1 Jessie.
I created a boot iso image based on a netinstall image and put a preseed.cfg file in int for automatic installation.
I managed to get it bootable with BIOS and UEFI and can install a KDE Developer Debian in VMWare Workstation 11 fully automated.
I have also a server iso image to install a debian Server with Jenkins, both with BIOS and UEFI Boot.
But after the installation, the Version with UEFI Boot shows a black Screen when started.
I can blindly log in, start the gui with "startx" and see my installed xfce desktop. When i quit xfce the console is usable and visible.
I tried suggested bootparameters "nomodeset" and "vga=Linux" that i found with google to no avail.
I also tried to debug the boot prozess, to find out which command leads to a blank screen, but i did not find the right place to delay the processes at bootup so i can see when the messages dissapear (quiet bootparameter was removed :-)
I also tried to reset the console to no avail.
Can anybode point me to a tool that does the same "switching" like X so the console is useable?
Can anybody give me some hints how to debug the bootprocess to find out which command is causing this behaviour?
I dont want to install X because this should be a headless server system later.
I managed to get my system to boot using the kernel command line modprobe.blacklist=vmwgfx, or placing 'blacklist vmwgfx' in /etc/modprobe.d/*.conf
I assume it is some bug in the vmwgfx module, however as this workaround works for me I have no immediate need to investigate further.
When installing Linux on a virtualbox with a windows 7 64bit host
I get the following screen
All the tutorials I have watched on how to install Linux on a virtualbox always skip this screen
I am using a iso file but I do not see an option to enter the path of said iso file
do I need to copy the file to a cd? or am I missing a setting for the virtualbox?
The way VirtualBox (or virtualization in general) works, is that when on the host (the Windows PC running the VirtualBox) you mount the ISO file as a CD/DVD drive, it will be shown as CD/DVD on the client (your Linux installation). The client won't see the difference.
So in that sense you are doing it correctly. However, you have the "wrong" installation ISO. The file you have mounted is "Oracle Linux R6 Update 5 UEK Boot ISO x86_64 V41364-01.iso" (if I googled correctly). So the question in your first screenshot asking about the installation image is to my understanding asking for where the actual installation data can be found. This would be either a DVD, another harddrive, local repository in LAN, or from the Internet. In your case it would be easier to use an installation media, which already includes the installation files, which would be "Oracle Linux R6 Update 5 x86_64 V41362-01.iso" (again if I googled correctly).
So to sum up, either download the full installation image (around 4 GB), or use the one you have and point the "url" to an image from the Internet.
I have been trying maybe weeks now to figure out how to configure VirtualBox to have 1366x768 resolution on a linux guest, which is on a windows 8.1 host.
My configuration:
Windows 8.1 as host
Linuxmint 17.1 as guest (tried ubuntu and debian too but no luck)
Virtualbox 4.3.26 and its extension pack
Laptop is powerful with 16GB ram and 4GB Nvdia
My problem is that it doesn't matter what I used, nothing worked.
Please do not post the answers on most known websites, I tried them already.
Once your VM is started, you need to run the VBox Linux Guest Additions.
First try to run it from the VirtualBox window's menu:
Devices >> Insert guest Additions CD image...
and follow the instructions.
If that fails, open a terminal and go to the directory where you CD reader is mounted (/run/media/ on Fedora or /media/ on Ubuntu for example).
Then type command sudo ./VBoxLinuxAdditions.run
Complete instructions can be found on the VirtualBox user manual
Once Guest Additions are installed, reboot your virtual machine. You should be able to resize your screen to your heart's content.
I installed the new VirtualBox 5.0.0_BETA2 and it solved my all problems. Great product is getting ready! Cant wait the latest release. more than a PERFECT software. Now you can remove top bar and/or bottom bar easily. Show what you need.
If you are having problem like me with 1366x768 I recommend you to install latest versin of VB even if it is Beta!
Two questions, first question is, I want to start using Linux (the Lubuntu distro) as my operating system. I currently have Windows 7 but I don't want to dual boot or run Lubuntu in a virtual machine (which is what I've been doing).. I want to just uninstall Windows 7 and make Lubuntu my OS. Would I be able to do that with the Lubuntu ISO image file that the developers have on their website?
Second question is, I have a Windows 7 CD (which I used to upgrade from Windows Vista to 7). Once I make Lubuntu my only OS, am I able to switch back to Windows 7 with that CD? Do I just run the installation from the Windows 7 CD?
First question; Yes this is possible, you'll want to burn the ISO to a USB stick, then boot from your USB stick. Lubuntu will have an easy installation wizard from the live USB.
Here's a great guide for it.
Second question; You will not be able to do it directly with that CD, as having Vista as the main OS is a prerequisite for that CD to work. If you have a Vista installation CD laying around, then you can install that first, then do the Win7 upgrade.
I'll answer for you second question. You can do it.
But I not perfectly understood your first question. Would you like download an .iso file and install system from it?
P. S. Sorry for my English
There is no option of uninstalling windows.
Your best option, if you don't want to use windows anymore is to backup all your data and format the drive. The formating can be done via the ubuntu installer.
Steps:
1. backup all your data from the drive(partition) you will be formating
burn the iso to a cd/dvd
insert the cd/dvd into the cd/dvd drive and restart your PC
select boot from cd/dvd (by default the cd booting is on, but you may have to enable it in bios)
install ubuntu(the installation guide will guide you through the process)
enjoy Ubuntu
PS: you may want to consider intstalling ubuntu on another partition, this will enable you to choose the OS when you boot your PC